From 778575ff30294adea9fc1d935dc1364e25f8f138 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Jun 2014 14:36:07 -0700 Subject: [PATCH] drivers/rtc/rtc-bfin.c: do not abort when requesting irq fails The RTC framework does not let you return an error once a call to devm_rtc_device_register has succeeded. Avoid doing that when the IRQ request fails as we can still support reading/writing the clock without the IRQ. Signed-off-by: Mike Frysinger Reported-by: Ales Novak Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-bfin.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c index 0c53f452849d..fe4bdb06a55a 100644 --- a/drivers/rtc/rtc-bfin.c +++ b/drivers/rtc/rtc-bfin.c @@ -346,7 +346,7 @@ static int bfin_rtc_probe(struct platform_device *pdev) { struct bfin_rtc *rtc; struct device *dev = &pdev->dev; - int ret = 0; + int ret; unsigned long timeout = jiffies + HZ; dev_dbg_stamp(dev); @@ -361,16 +361,17 @@ static int bfin_rtc_probe(struct platform_device *pdev) /* Register our RTC with the RTC framework */ rtc->rtc_dev = devm_rtc_device_register(dev, pdev->name, &bfin_rtc_ops, THIS_MODULE); - if (unlikely(IS_ERR(rtc->rtc_dev))) { - ret = PTR_ERR(rtc->rtc_dev); - goto err; - } + if (unlikely(IS_ERR(rtc->rtc_dev))) + return PTR_ERR(rtc->rtc_dev); /* Grab the IRQ and init the hardware */ ret = devm_request_irq(dev, IRQ_RTC, bfin_rtc_interrupt, 0, pdev->name, dev); if (unlikely(ret)) - goto err; + dev_err(&pdev->dev, + "unable to request IRQ; alarm won't work, " + "and writes will be delayed\n"); + /* sometimes the bootloader touched things, but the write complete was not * enabled, so let's just do a quick timeout here since the IRQ will not fire ... */ @@ -381,9 +382,6 @@ static int bfin_rtc_probe(struct platform_device *pdev) bfin_write_RTC_SWCNT(0); return 0; - -err: - return ret; } static int bfin_rtc_remove(struct platform_device *pdev) -- 2.20.1