From 7682b3740dd7e3039ec9885b423f7e68f0dc24d0 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Wed, 17 Jun 2015 23:47:26 -0700 Subject: [PATCH] pinctrl: qcom: spmi-mpp: Fixes related to enable handling There's currently no way to re-enable a mpp block once you've entered a state that disables the state, this patch makes it possible to leave the bias-high-impedance state. Also read the enable state from the hardware on probe. With this in place the is_enabled variable is accurately tracking the state of the hardware and we can use that for the debug output as well. Signed-off-by: Bjorn Andersson Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index b247a17bc2af..6d9abeea810d 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -354,6 +354,9 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, pad = pctldev->desc->pins[pin].drv_data; + /* Make it possible to enable the pin, by not setting high impedance */ + pad->is_enabled = true; + for (i = 0; i < nconfs; i++) { param = pinconf_to_config_param(configs[i]); arg = pinconf_to_config_argument(configs[i]); @@ -445,7 +448,13 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT; val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK; - return pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val); + ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val); + if (ret < 0) + return ret; + + val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT; + + return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val); } static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev, @@ -453,7 +462,7 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev, { struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev); struct pmic_mpp_pad *pad; - int ret, val; + int ret; static const char *const biases[] = { "0.6kOhm", "10kOhm", "30kOhm", "Disabled" @@ -464,9 +473,7 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev, seq_printf(s, " mpp%-2d:", pin + PMIC_MPP_PHYSICAL_OFFSET); - val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL); - - if (val < 0 || !(val >> PMIC_MPP_REG_MASTER_EN_SHIFT)) { + if (!pad->is_enabled) { seq_puts(s, " ---"); } else { @@ -706,8 +713,12 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state, pad->amux_input = val >> PMIC_MPP_REG_AIN_ROUTE_SHIFT; pad->amux_input &= PMIC_MPP_REG_AIN_ROUTE_MASK; - /* Pin could be disabled with PIN_CONFIG_BIAS_HIGH_IMPEDANCE */ - pad->is_enabled = true; + val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL); + if (val < 0) + return val; + + pad->is_enabled = !!val; + return 0; } -- 2.20.1