From 75df20e0385198e80439bfc33c001fcecf094622 Mon Sep 17 00:00:00 2001 From: Lars Lindley Date: Fri, 19 Mar 2010 21:43:25 +0100 Subject: [PATCH] Staging: winbond: mto.h Coding style fixes I fixed all problems reported by checkpatch.pl except for a couple of long lines. I also removed version comments and removed "commented away" code. Signed-off-by: Lars Lindley Acked-by: Pavel Machek Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/mto.h | 179 ++++++++++++++++------------------ 1 file changed, 82 insertions(+), 97 deletions(-) diff --git a/drivers/staging/winbond/mto.h b/drivers/staging/winbond/mto.h index fb4781d5781..a0f659cf99f 100644 --- a/drivers/staging/winbond/mto.h +++ b/drivers/staging/winbond/mto.h @@ -1,13 +1,10 @@ -//================================================================== -// MTO.H -// -// Revision history -//================================= -// 20030110 UN20 Pete Chao -// Initial Release -// -// Copyright (c) 2003 Winbond Electronics Corp. All rights reserved. -//================================================================== +/* + * ================================================================== + * MTO.H + * + * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved. + * ================================================================== + */ #ifndef __MTO_H__ #define __MTO_H__ @@ -15,115 +12,104 @@ struct wbsoft_priv; -// LA20040210_DTO kevin -//#define MTO_PREAMBLE_LONG 0 -//#define MTO_PREAMBLE_SHORT 1 #define MTO_PREAMBLE_LONG WLAN_PREAMBLE_TYPE_LONG #define MTO_PREAMBLE_SHORT WLAN_PREAMBLE_TYPE_SHORT -//============================================================================ -// struct _MTOParameters -- -// -// Defines the parameters used in the MAC Throughput Optimization algorithm -//============================================================================ +/* Defines the parameters used in the MAC Throughput Optimization algorithm */ struct wb35_mto_params { - //--------- wkchen added ------------- - u32 TxFlowCount; //to judge what kind the tx flow(sparse or busy) is - //------------------------------------------------ + u32 TxFlowCount; /* to judge what kind the tx flow(sparse or busy) is */ - //--------- DTO threshold parameters ------------- - u16 DTO_PeriodicCheckCycle; - u16 DTO_RssiThForAntDiv; + /* --------- DTO threshold parameters ------------- */ + u16 DTO_PeriodicCheckCycle; + u16 DTO_RssiThForAntDiv; - u16 DTO_TxCountThForCalcNewRate; - u16 DTO_TxRateIncTh; + u16 DTO_TxCountThForCalcNewRate; + u16 DTO_TxRateIncTh; - u16 DTO_TxRateDecTh; - u16 DTO_TxRateEqTh; + u16 DTO_TxRateDecTh; + u16 DTO_TxRateEqTh; - u16 DTO_TxRateBackOff; - u16 DTO_TxRetryRateReduce; + u16 DTO_TxRateBackOff; + u16 DTO_TxRetryRateReduce; - u16 DTO_TxPowerIndex; //0 ~ 31 - u16 reserved_1; - //------------------------------------------------ + u16 DTO_TxPowerIndex; /* 0 ~ 31 */ + u16 reserved_1; + /* ------------------------------------------------ */ - u8 PowerChangeEnable; - u8 AntDiversityEnable; - u8 CCA_Mode; - u8 CCA_Mode_Setup; - u8 Preamble_Type; - u8 PreambleChangeEnable; + u8 PowerChangeEnable; + u8 AntDiversityEnable; + u8 CCA_Mode; + u8 CCA_Mode_Setup; + u8 Preamble_Type; + u8 PreambleChangeEnable; - u8 DataRateLevel; - u8 DataRateChangeEnable; - u8 FragThresholdLevel; - u8 FragThresholdChangeEnable; + u8 DataRateLevel; + u8 DataRateChangeEnable; + u8 FragThresholdLevel; + u8 FragThresholdChangeEnable; - u16 RTSThreshold; - u16 RTSThreshold_Setup; + u16 RTSThreshold; + u16 RTSThreshold_Setup; - u32 AvgIdleSlot; - u32 Pr_Interf; - u32 AvgGapBtwnInterf; + u32 AvgIdleSlot; + u32 Pr_Interf; + u32 AvgGapBtwnInterf; - u8 RTSChangeEnable; - u8 Ant_sel; - u8 aging_timeout; - u8 reserved_2; + u8 RTSChangeEnable; + u8 Ant_sel; + u8 aging_timeout; + u8 reserved_2; - u32 Cnt_Ant[2]; - u32 SQ_Ant[2]; + u32 Cnt_Ant[2]; + u32 SQ_Ant[2]; -// 20040510 remove from globe vairable - u8 FallbackRateLevel; - u8 OfdmRateLevel; + u8 FallbackRateLevel; + u8 OfdmRateLevel; - u8 RatePolicy; - u8 reserved_3[3]; - - // For RSSI turning - s32 RSSI_high; - s32 RSSI_low; + u8 RatePolicy; + u8 reserved_3[3]; + /* For RSSI turning */ + s32 RSSI_high; + s32 RSSI_low; }; -#define MTO_DATA() (adapter->sMtoPara) -#define MTO_HAL() (&adapter->sHwData) -#define MTO_SET_PREAMBLE_TYPE(x) // 20040511 Turbo mark LM_PREAMBLE_TYPE(&pcore_data->lm_data) = (x) -#define MTO_ENABLE (adapter->sLocalPara.TxRateMode == RATE_AUTO) -#define MTO_TXPOWER_FROM_EEPROM (adapter->sHwData.PowerIndexFromEEPROM) -#define LOCAL_ANTENNA_NO() (adapter->sLocalPara.bAntennaNo) -#define LOCAL_IS_CONNECTED() (adapter->sLocalPara.wConnectedSTAindex != 0) -#define MTO_INITTXRATE_MODE (adapter->sHwData.SoftwareSet&0x2) //bit 1 +#define MTO_DATA() (adapter->sMtoPara) +#define MTO_HAL() (&adapter->sHwData) +#define MTO_SET_PREAMBLE_TYPE(x) /* Turbo mark LM_PREAMBLE_TYPE(&pcore_data->lm_data) = (x) */ +#define MTO_ENABLE (adapter->sLocalPara.TxRateMode == RATE_AUTO) +#define MTO_TXPOWER_FROM_EEPROM (adapter->sHwData.PowerIndexFromEEPROM) +#define LOCAL_ANTENNA_NO() (adapter->sLocalPara.bAntennaNo) +#define LOCAL_IS_CONNECTED() (adapter->sLocalPara.wConnectedSTAindex != 0) +#define MTO_INITTXRATE_MODE (adapter->sHwData.SoftwareSet&0x2) /* bit 1 */ -#define MTO_POWER_CHANGE_ENABLE() MTO_DATA().PowerChangeEnable -#define MTO_CCA_MODE() MTO_DATA().CCA_Mode -#define MTO_CCA_MODE_SETUP() MTO_DATA().CCA_Mode_Setup -#define MTO_PREAMBLE_TYPE() MTO_DATA().Preamble_Type -#define MTO_PREAMBLE_CHANGE_ENABLE() MTO_DATA().PreambleChangeEnable +#define MTO_POWER_CHANGE_ENABLE() MTO_DATA().PowerChangeEnable +#define MTO_CCA_MODE() MTO_DATA().CCA_Mode +#define MTO_CCA_MODE_SETUP() MTO_DATA().CCA_Mode_Setup +#define MTO_PREAMBLE_TYPE() MTO_DATA().Preamble_Type +#define MTO_PREAMBLE_CHANGE_ENABLE() MTO_DATA().PreambleChangeEnable -#define MTO_RATE_LEVEL() MTO_DATA().DataRateLevel +#define MTO_RATE_LEVEL() MTO_DATA().DataRateLevel #define MTO_OFDM_RATE_LEVEL() MTO_DATA().OfdmRateLevel -#define MTO_RATE_CHANGE_ENABLE() MTO_DATA().DataRateChangeEnable -#define MTO_FRAG_TH_LEVEL() MTO_DATA().FragThresholdLevel -#define MTO_FRAG_CHANGE_ENABLE() MTO_DATA().FragThresholdChangeEnable -#define MTO_RTS_THRESHOLD() MTO_DATA().RTSThreshold -#define MTO_RTS_CHANGE_ENABLE() MTO_DATA().RTSChangeEnable -#define MTO_RTS_THRESHOLD_SETUP() MTO_DATA().RTSThreshold_Setup +#define MTO_RATE_CHANGE_ENABLE() MTO_DATA().DataRateChangeEnable +#define MTO_FRAG_TH_LEVEL() MTO_DATA().FragThresholdLevel +#define MTO_FRAG_CHANGE_ENABLE() MTO_DATA().FragThresholdChangeEnable +#define MTO_RTS_THRESHOLD() MTO_DATA().RTSThreshold +#define MTO_RTS_CHANGE_ENABLE() MTO_DATA().RTSChangeEnable +#define MTO_RTS_THRESHOLD_SETUP() MTO_DATA().RTSThreshold_Setup -#define MTO_AVG_IDLE_SLOT() MTO_DATA().AvgIdleSlot -#define MTO_PR_INTERF() MTO_DATA().Pr_Interf -#define MTO_AVG_GAP_BTWN_INTERF() MTO_DATA().AvgGapBtwnInterf +#define MTO_AVG_IDLE_SLOT() MTO_DATA().AvgIdleSlot +#define MTO_PR_INTERF() MTO_DATA().Pr_Interf +#define MTO_AVG_GAP_BTWN_INTERF() MTO_DATA().AvgGapBtwnInterf -#define MTO_CNT_ANT(x) MTO_DATA().Cnt_Ant[(x)] -#define MTO_SQ_ANT(x) MTO_DATA().SQ_Ant[(x)] -#define MTO_AGING_TIMEOUT() MTO_DATA().aging_timeout +#define MTO_CNT_ANT(x) MTO_DATA().Cnt_Ant[(x)] +#define MTO_SQ_ANT(x) MTO_DATA().SQ_Ant[(x)] +#define MTO_AGING_TIMEOUT() MTO_DATA().aging_timeout +#define MTO_TXFLOWCOUNT() MTO_DATA().TxFlowCount -#define MTO_TXFLOWCOUNT() MTO_DATA().TxFlowCount -//--------- DTO threshold parameters ------------- +/* --------- DTO threshold parameters ------------- */ #define MTOPARA_PERIODIC_CHECK_CYCLE() MTO_DATA().DTO_PeriodicCheckCycle #define MTOPARA_RSSI_TH_FOR_ANTDIV() MTO_DATA().DTO_RssiThForAntDiv #define MTOPARA_TXCOUNT_TH_FOR_CALC_RATE() MTO_DATA().DTO_TxCountThForCalcNewRate @@ -133,13 +119,13 @@ struct wb35_mto_params { #define MTOPARA_TXRATE_BACKOFF() MTO_DATA().DTO_TxRateBackOff #define MTOPARA_TXRETRYRATE_REDUCE() MTO_DATA().DTO_TxRetryRateReduce #define MTOPARA_TXPOWER_INDEX() MTO_DATA().DTO_TxPowerIndex -//------------------------------------------------ +/* ------------------------------------------------ */ -extern u16 MTO_Frag_Th_Tbl[]; +extern u16 MTO_Frag_Th_Tbl[]; -#define MTO_DATA_RATE() MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()] -#define MTO_FRAG_TH() MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()] +#define MTO_DATA_RATE() MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()] +#define MTO_FRAG_TH() MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()] extern void MTO_Init(struct wbsoft_priv *); extern void MTO_PeriodicTimerExpired(struct wbsoft_priv *); @@ -148,6 +134,5 @@ extern u8 MTO_GetTxRate(struct wbsoft_priv *adapter, u32 fpdu_len); extern u8 MTO_GetTxFallbackRate(struct wbsoft_priv *adapter); extern void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index); -#endif //__MTO_H__ - +#endif /* __MTO_H__ */ -- 2.20.1