From 75da3b1c24389fe78680269176de0332d35f7fad Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 12 Jun 2015 09:04:55 +0200 Subject: [PATCH] usb: dwc3: pci: make better use of gpiod API MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Use this additional parameter and the _optional variant to simplify the driver and improve error handling. Also expand the comment to explain why it's not sensible to switch to devm_gpiod_get and why the gpiod_put is also necessary. Furthermore this is one caller less that stops us making the flags argument to gpiod_get*() mandatory. Tested-by: Heikki Krogerus Signed-off-by: Uwe Kleine-König --- drivers/usb/dwc3/dwc3-pci.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 27e4fc896e9d..f62617999f3c 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -83,17 +83,23 @@ static int dwc3_pci_quirks(struct pci_dev *pdev) acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev), acpi_dwc3_byt_gpios); - /* These GPIOs will turn on the USB2 PHY */ - gpio = gpiod_get(&pdev->dev, "cs"); - if (!IS_ERR(gpio)) { - gpiod_direction_output(gpio, 0); - gpiod_set_value_cansleep(gpio, 1); - gpiod_put(gpio); - } + /* + * These GPIOs will turn on the USB2 PHY. Note that we have to + * put the gpio descriptors again here because the phy driver + * might want to grab them, too. + */ + gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); + + gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); - gpio = gpiod_get(&pdev->dev, "reset"); - if (!IS_ERR(gpio)) { - gpiod_direction_output(gpio, 0); + if (gpio) { gpiod_set_value_cansleep(gpio, 1); gpiod_put(gpio); usleep_range(10000, 11000); -- 2.20.1