From 73b0c0b0c1fa06acc3a02a58f301b0db0818d3d0 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Sun, 21 Oct 2007 17:03:31 +0800 Subject: [PATCH] Blackfin arch: Fix up /proc/cpuinfo so it is like everyone else Fix up /proc/cpuinfo so it is like everyone else, and gets parsed by various applications properly. Still needs some tweaking on parts without full L1 sram, like 532, 531, so it doesn't print out L1 bank info that doesn't exist. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 100 +++++++++++++++++++++-------------- 1 file changed, 61 insertions(+), 39 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8dcd76e87ed5..34fbf93cc118 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -498,7 +498,7 @@ EXPORT_SYMBOL(get_sclk); */ static int show_cpuinfo(struct seq_file *m, void *v) { - char *cpu, *mmu, *fpu, *name; + char *cpu, *mmu, *fpu, *name, vendor[20], cache[30]; uint32_t revid; u_long cclk = 0, sclk = 0; @@ -513,65 +513,78 @@ static int show_cpuinfo(struct seq_file *m, void *v) cclk = get_cclk(); sclk = get_sclk(); - seq_printf(m, "CPU:\t\tADSP-%s Rev. 0.%d\n" - "MMU:\t\t%s\n" - "FPU:\t\t%s\n" - "Core Clock:\t%9lu Hz\n" - "System Clock:\t%9lu Hz\n" - "BogoMips:\t%lu.%02lu\n" - "Calibration:\t%lu loops\n", - cpu, revid, mmu, fpu, - cclk, - sclk, - (loops_per_jiffy * HZ) / 500000, - ((loops_per_jiffy * HZ) / 5000) % 100, - (loops_per_jiffy * HZ)); - seq_printf(m, "Board Name:\t%s\n", name); - seq_printf(m, "Board Memory:\t%ld MB\n", physical_mem_end >> 20); - seq_printf(m, "Kernel Memory:\t%ld MB\n", (unsigned long)_ramend >> 20); - if (bfin_read_IMEM_CONTROL() & (ENICPLB | IMC)) - seq_printf(m, "I-CACHE:\tON\n"); - else - seq_printf(m, "I-CACHE:\tOFF\n"); - if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)) - seq_printf(m, "D-CACHE:\tON" -#if defined CONFIG_BFIN_WB - " (write-back)" -#elif defined CONFIG_BFIN_WT - " (write-through)" -#endif - "\n"); - else - seq_printf(m, "D-CACHE:\tOFF\n"); - + switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) { + case(0xca): + strcpy(vendor, "AnalogDevices"); + break; + default: + strcpy(vendor, "unknown"); + } + seq_printf(m, "processor\t: %d\n" + "vendor_id\t: %s\n" + "cpu family\t: 0x%x\n" + "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK)\n" + "stepping\t: %d\n", + 0, + vendor, + (bfin_read_CHIPID() & CHIPID_FAMILY), + cpu, cclk/1000000, sclk/1000000, + revid); + + seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", + cclk/1000000, cclk%1000000, + sclk/1000000, sclk%1000000); + seq_printf(m, "bogomips\t: %lu.%02lu\n" + "Calibration\t: %lu loops\n", + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100, + (loops_per_jiffy * HZ)); + + /* Check Cache configutation */ switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) { case ACACHE_BSRAM: - seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n"); + strcpy(cache, "dbank-A/B\t: cache/sram"); dcache_size = 16; dsup_banks = 1; break; case ACACHE_BCACHE: - seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n"); + strcpy(cache, "dbank-A/B\t: cache/cache"); dcache_size = 32; dsup_banks = 2; break; case ASRAM_BSRAM: - seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n"); + strcpy(cache, "dbank-A/B\t: sram/sram"); dcache_size = 0; dsup_banks = 0; break; default: + strcpy(cache, "unknown"); + dcache_size = 0; + dsup_banks = 0; break; } + /* Is it turned on? */ + if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))) + dcache_size = 0; - seq_printf(m, "I-CACHE Size:\t%dKB\n", BFIN_ICACHESIZE / 1024); - seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size); - seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n", + seq_printf(m, "cache size\t: %d KB(L1 icache) " + "%d KB(L1 dcache-%s) %d KB(L2 cache)\n", + BFIN_ICACHESIZE / 1024, dcache_size, +#if defined CONFIG_BFIN_WB + "wb" +#elif defined CONFIG_BFIN_WT + "wt" +#endif + , 0); + + seq_printf(m, "%s\n", cache); + + seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n", BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES); seq_printf(m, - "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", + "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, BFIN_DLINES); #ifdef CONFIG_BFIN_ICACHE_LOCK @@ -625,6 +638,15 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "No Ways are locked\n"); } #endif + + seq_printf(m, "board name\t: %s\n", name); + seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", + physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); + seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n", + ((int)memory_end - (int)_stext) >> 10, + _stext, + (void *)memory_end); + return 0; } -- 2.20.1