From 7393de60a2ddd30ac0d6699c61f7a11519bf91fa Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Tue, 3 Nov 2015 03:45:11 -0200 Subject: [PATCH] [media] atmel-isi: setup YCC_SWAP correctly when using preview path The preview path only can convert UYVY format to RGB data. To make preview path work correctly, we need to set up YCC_SWAP according to sensor output and convert them to UYVY. Signed-off-by: Josh Wu Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/atmel-isi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 22ae4c814fad..b70754f496f0 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -117,6 +117,20 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi, case MEDIA_BUS_FMT_YVYU8_2X8: return ISI_CFG2_YCC_SWAP_MODE_1; } + } else if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_RGB565) { + /* + * Preview path is enabled, it will convert UYVY to RGB format. + * But if sensor output format is not UYVY, we need to set + * YCC_SWAP_MODE to convert it as UYVY. + */ + switch (xlate->code) { + case MEDIA_BUS_FMT_VYUY8_2X8: + return ISI_CFG2_YCC_SWAP_MODE_1; + case MEDIA_BUS_FMT_YUYV8_2X8: + return ISI_CFG2_YCC_SWAP_MODE_2; + case MEDIA_BUS_FMT_YVYU8_2X8: + return ISI_CFG2_YCC_SWAP_MODE_3; + } } /* -- 2.20.1