From 735a3d9efdc5aeebe201008e6655b235c7f02aeb Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Tue, 11 Jan 2011 12:20:05 +0100 Subject: [PATCH] regulator: Support MAX8998/LP3974 DVS-GPIO The previous driver did not support BUCK1-DVS3, BUCK1-DVS4, and BUCK2-DVS2 modes. This patch adds such modes and an option to block setting buck1/2 voltages out of the preset values. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/regulator/max8998.c | 87 ++++++++++++++++++++++++++++--------- include/linux/mfd/max8998.h | 26 ++++++++--- 2 files changed, 87 insertions(+), 26 deletions(-) diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index af52ebfc4927..0ec49ca527a8 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -424,6 +424,9 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev, } } + if (pdata->buck_voltage_lock) + return -EINVAL; + /* no predefine regulator found */ max8998->buck1_idx = (buck1_last_val % 2) + 2; dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n", @@ -451,18 +454,26 @@ buck1_exit: "BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n" , i, max8998->buck2_vol[0], max8998->buck2_vol[1]); if (gpio_is_valid(pdata->buck2_set3)) { - if (max8998->buck2_vol[0] == i) { - max8998->buck1_idx = 0; - buck2_gpio_set(pdata->buck2_set3, 0); - } else { - max8998->buck1_idx = 1; - ret = max8998_get_voltage_register(rdev, ®, - &shift, - &mask); - ret = max8998_write_reg(i2c, reg, i); - max8998->buck2_vol[1] = i; - buck2_gpio_set(pdata->buck2_set3, 1); + + /* check if requested voltage */ + /* value is already defined */ + for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) { + if (max8998->buck2_vol[j] == i) { + max8998->buck2_idx = j; + buck2_gpio_set(pdata->buck2_set3, j); + goto buck2_exit; + } } + + if (pdata->buck_voltage_lock) + return -EINVAL; + + max8998_get_voltage_register(rdev, + ®, &shift, &mask); + ret = max8998_write_reg(i2c, reg, i); + max8998->buck2_vol[max8998->buck2_idx] = i; + buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx); +buck2_exit: dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name, gpio_get_value(pdata->buck2_set3)); } else { @@ -707,6 +718,9 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) platform_set_drvdata(pdev, max8998); i2c = max8998->iodev->i2c; + max8998->buck1_idx = pdata->buck1_default_idx; + max8998->buck2_idx = pdata->buck2_default_idx; + /* NOTE: */ /* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */ /* will be displayed */ @@ -739,23 +753,46 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck1_max_voltage1 / 1000)) + < (pdata->buck1_voltage1 / 1000)) i++; - printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx); max8998->buck1_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i); + if (ret) + return ret; /* Set predefined value for BUCK1 register 2 */ i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck1_max_voltage2 / 1000)) + < (pdata->buck1_voltage2 / 1000)) i++; max8998->buck1_vol[1] = i; - printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx); - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i) - + ret; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i); + if (ret) + return ret; + + /* Set predefined value for BUCK1 register 3 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck1_voltage3 / 1000)) + i++; + + max8998->buck1_vol[2] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i); + if (ret) + return ret; + + /* Set predefined value for BUCK1 register 4 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck1_voltage4 / 1000)) + i++; + + max8998->buck1_vol[3] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i); if (ret) return ret; @@ -772,18 +809,28 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) gpio_direction_output(pdata->buck2_set3, max8998->buck2_idx & 0x1); - /* BUCK2 - set preset default voltage value to buck2_vol[0] */ + /* BUCK2 register 1 */ i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck2_max_voltage / 1000)) + < (pdata->buck2_voltage1 / 1000)) i++; - printk(KERN_ERR "i:%d, buck2_idx:%d\n", i, max8998->buck2_idx); max8998->buck2_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i); if (ret) return ret; + /* BUCK2 register 2 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck2_voltage2 / 1000)) + i++; + printk(KERN_ERR "i2:%d, buck2_idx:%d\n", i, max8998->buck2_idx); + max8998->buck2_vol[1] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i); + if (ret) + return ret; } for (i = 0; i < pdata->num_regulators; i++) { diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index c22b9a417c35..61daa167b576 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -70,12 +70,20 @@ struct max8998_regulator_data { * @num_regulators: number of regultors used * @irq_base: base IRQ number for max8998, required for IRQs * @ono: power onoff IRQ number for max8998 - * @buck1_max_voltage1: BUCK1 maximum alowed voltage register 1 - * @buck1_max_voltage2: BUCK1 maximum alowed voltage register 2 - * @buck2_max_voltage: BUCK2 maximum alowed voltage + * @buck_voltage_lock: Do NOT change the values of the following six + * registers set by buck?_voltage?. The voltage of BUCK1/2 cannot + * be other than the preset values. + * @buck1_voltage1: BUCK1 DVS mode 1 voltage register + * @buck1_voltage2: BUCK1 DVS mode 2 voltage register + * @buck1_voltage3: BUCK1 DVS mode 3 voltage register + * @buck1_voltage4: BUCK1 DVS mode 4 voltage register + * @buck2_voltage1: BUCK2 DVS mode 1 voltage register + * @buck2_voltage2: BUCK2 DVS mode 2 voltage register * @buck1_set1: BUCK1 gpio pin 1 to set output voltage * @buck1_set2: BUCK1 gpio pin 2 to set output voltage + * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2 * @buck2_set3: BUCK2 gpio pin to set output voltage + * @buck2_default_idx: Default for BUCK2 gpio pin. * @wakeup: Allow to wake up from suspend * @rtc_delay: LP3974 RTC chip bug that requires delay after a register * write before reading it. @@ -85,12 +93,18 @@ struct max8998_platform_data { int num_regulators; int irq_base; int ono; - int buck1_max_voltage1; - int buck1_max_voltage2; - int buck2_max_voltage; + bool buck_voltage_lock; + int buck1_voltage1; + int buck1_voltage2; + int buck1_voltage3; + int buck1_voltage4; + int buck2_voltage1; + int buck2_voltage2; int buck1_set1; int buck1_set2; + int buck1_default_idx; int buck2_set3; + int buck2_default_idx; bool wakeup; bool rtc_delay; }; -- 2.20.1