From 70c3967d4f8029f3d53323a9f0490df61d8cb77d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 21 Jun 2006 12:11:16 +0200 Subject: [PATCH] [POWERPC] Convert powermac ide blink to new led infrastructure This patch removes the old pmac ide led blink code and adds generic LED subsystem support for the LED. It maintains backward compatibility with the old BLK_DEV_IDE_PMAC_BLINK Kconfig option which now simply selects the new code and influences the default trigger. Signed-off-by: Johannes Berg Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/ide/Kconfig | 9 +- drivers/ide/ppc/pmac.c | 125 --------------------------- drivers/macintosh/Kconfig | 11 +++ drivers/macintosh/Makefile | 1 + drivers/macintosh/via-pmu-led.c | 144 ++++++++++++++++++++++++++++++++ 5 files changed, 164 insertions(+), 126 deletions(-) create mode 100644 drivers/macintosh/via-pmu-led.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d633081fa4c5..d1266fe2d1ab 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -774,11 +774,18 @@ config BLK_DEV_IDEDMA_PMAC performance. config BLK_DEV_IDE_PMAC_BLINK - bool "Blink laptop LED on drive activity" + bool "Blink laptop LED on drive activity (DEPRECATED)" depends on BLK_DEV_IDE_PMAC && ADB_PMU + select ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK help This option enables the use of the sleep LED as a hard drive activity LED. + This option is deprecated, it only selects ADB_PMU_LED and + LEDS_TRIGGER_IDE_DISK and changes the code in the new led class + device to default to the ide-disk trigger (which should be set + from userspace via sysfs). config BLK_DEV_IDE_SWARM tristate "IDE for Sibyte evaluation boards" diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index ffca8b63ee79..e8ef3455ec35 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -420,107 +420,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ -/* - * Below is the code for blinking the laptop LED along with hard - * disk activity. - */ - -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - -/* Set to 50ms minimum led-on time (also used to limit frequency - * of requests sent to the PMU - */ -#define PMU_HD_BLINK_TIME (HZ/50) - -static struct adb_request pmu_blink_on, pmu_blink_off; -static spinlock_t pmu_blink_lock; -static unsigned long pmu_blink_stoptime; -static int pmu_blink_ledstate; -static struct timer_list pmu_blink_timer; -static int pmu_ide_blink_enabled; - - -static void -pmu_hd_blink_timeout(unsigned long data) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_blink_lock, flags); - - /* We may have been triggered again in a racy way, check - * that we really want to switch it off - */ - if (time_after(pmu_blink_stoptime, jiffies)) - goto done; - - /* Previous req. not complete, try 100ms more */ - if (pmu_blink_off.complete == 0) - mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME); - else if (pmu_blink_ledstate) { - pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0); - pmu_blink_ledstate = 0; - } -done: - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static void -pmu_hd_kick_blink(void *data, int rw) -{ - unsigned long flags; - - pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME; - wmb(); - mod_timer(&pmu_blink_timer, pmu_blink_stoptime); - /* Fast path when LED is already ON */ - if (pmu_blink_ledstate == 1) - return; - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_on.complete && !pmu_blink_ledstate) { - pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1); - pmu_blink_ledstate = 1; - } - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static int -pmu_hd_blink_init(void) -{ - struct device_node *dt; - const char *model; - - /* Currently, I only enable this feature on KeyLargo based laptops, - * older laptops may support it (at least heathrow/paddington) but - * I don't feel like loading those venerable old machines with so - * much additional interrupt & PMU activity... - */ - if (pmu_get_model() != PMU_KEYLARGO_BASED) - return 0; - - dt = of_find_node_by_path("/"); - if (dt == NULL) - return 0; - model = (const char *)get_property(dt, "model", NULL); - if (model == NULL) - return 0; - if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && - strncmp(model, "iBook", strlen("iBook")) != 0) { - of_node_put(dt); - return 0; - } - of_node_put(dt); - - pmu_blink_on.complete = 1; - pmu_blink_off.complete = 1; - spin_lock_init(&pmu_blink_lock); - init_timer(&pmu_blink_timer); - pmu_blink_timer.function = pmu_hd_blink_timeout; - - return 1; -} - -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - /* * N.B. this can't be an initfunc, because the media-bay task can * call ide_[un]register at any time. @@ -1192,23 +1091,6 @@ pmac_ide_do_suspend(ide_hwif_t *hwif) pmif->timings[0] = 0; pmif->timings[1] = 0; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - /* Note: This code will be called for every hwif, thus we'll - * try several time to stop the LED blinker timer, but that - * should be harmless - */ - if (pmu_ide_blink_enabled) { - unsigned long flags; - - /* Make sure we don't hit the PMU blink */ - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_ledstate) - del_timer(&pmu_blink_timer); - pmu_blink_ledstate = 0; - spin_unlock_irqrestore(&pmu_blink_lock, flags); - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - disable_irq(pmif->irq); /* The media bay will handle itself just fine */ @@ -1376,13 +1258,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->selectproc = pmac_ide_selectproc; hwif->speedproc = pmac_ide_tune_chipset; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - pmu_ide_blink_enabled = pmu_hd_blink_init(); - - if (pmu_ide_blink_enabled) - hwif->led_act = pmu_hd_kick_blink; -#endif - printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hwif->irq); diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 37cd6ee4586b..062dac26f2ae 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -78,6 +78,17 @@ config ADB_PMU this device; you should do so if your machine is one of those mentioned above. +config ADB_PMU_LED + bool "Support for the Power/iBook front LED" + depends on ADB_PMU + select LEDS_CLASS + help + Support the front LED on Power/iBooks as a generic LED that can + be triggered by any of the supported triggers. To get the + behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this + and the ide-disk LED trigger and configure appropriately through + sysfs. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 45a268f8047e..b53d45f87b0b 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_INPUT_ADBHID) += adbhid.o obj-$(CONFIG_ANSLCD) += ans-lcd.o obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o +obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o obj-$(CONFIG_ADB_CUDA) += via-cuda.o obj-$(CONFIG_PMAC_APM_EMU) += apm_emu.o diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c new file mode 100644 index 000000000000..af8375ed0f5e --- /dev/null +++ b/drivers/macintosh/via-pmu-led.c @@ -0,0 +1,144 @@ +/* + * via-pmu LED class device + * + * Copyright 2006 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include +#include +#include +#include +#include +#include +#include + +static spinlock_t pmu_blink_lock; +static struct adb_request pmu_blink_req; +/* -1: no change, 0: request off, 1: request on */ +static int requested_change; +static int sleeping; + +static void pmu_req_done(struct adb_request * req) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + /* if someone requested a change in the meantime + * (we only see the last one which is fine) + * then apply it now */ + if (requested_change != -1 && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + /* reset requested change */ + requested_change = -1; + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static void pmu_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + switch (brightness) { + case LED_OFF: + requested_change = 0; + break; + case LED_FULL: + requested_change = 1; + break; + default: + goto out; + break; + } + /* if request isn't done, then don't do anything */ + if (pmu_blink_req.complete && !sleeping) + pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); + out: + spin_unlock_irqrestore(&pmu_blink_lock, flags); +} + +static struct led_classdev pmu_led = { + .name = "pmu-front-led", +#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK + .default_trigger = "ide-disk", +#endif + .brightness_set = pmu_led_set, +}; + +#ifdef CONFIG_PM +static int pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_blink_lock, flags); + + switch (when) { + case PBOOK_SLEEP_REQUEST: + sleeping = 1; + break; + case PBOOK_WAKE: + sleeping = 0; + break; + default: + /* do nothing */ + break; + } + spin_unlock_irqrestore(&pmu_blink_lock, flags); + + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier via_pmu_led_sleep_notif = { + .notifier_call = pmu_led_sleep_call, +}; +#endif + +static int __init via_pmu_led_init(void) +{ + struct device_node *dt; + const char *model; + + /* only do this on keylargo based models */ + if (pmu_get_model() != PMU_KEYLARGO_BASED) + return -ENODEV; + + dt = of_find_node_by_path("/"); + if (dt == NULL) + return -ENODEV; + model = (const char *)get_property(dt, "model", NULL); + if (model == NULL) + return -ENODEV; + if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && + strncmp(model, "iBook", strlen("iBook")) != 0) { + of_node_put(dt); + /* ignore */ + return -ENODEV; + } + of_node_put(dt); + + spin_lock_init(&pmu_blink_lock); + /* no outstanding req */ + pmu_blink_req.complete = 1; + pmu_blink_req.done = pmu_req_done; +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&via_pmu_led_sleep_notif); +#endif + return led_classdev_register(NULL, &pmu_led); +} + +late_initcall(via_pmu_led_init); -- 2.20.1