From 700598cef866011b878f389c30414d31fa5bb87b Mon Sep 17 00:00:00 2001 From: GuanXuetao Date: Sat, 15 Jan 2011 18:25:14 +0800 Subject: [PATCH] unicore32 machine related files: pci bus handling This patch implements arch-specific pci bus driver. Signed-off-by: Guan Xuetao --- arch/unicore32/include/asm/pci.h | 46 ++++ arch/unicore32/kernel/pci.c | 404 +++++++++++++++++++++++++++++++ drivers/pci/Makefile | 1 + 3 files changed, 451 insertions(+) create mode 100644 arch/unicore32/include/asm/pci.h create mode 100644 arch/unicore32/kernel/pci.c diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h new file mode 100644 index 000000000000..c5b28b459535 --- /dev/null +++ b/arch/unicore32/include/asm/pci.h @@ -0,0 +1,46 @@ +/* + * linux/arch/unicore32/include/asm/pci.h + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Copyright (C) 2001-2010 GUAN Xue-tao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __UNICORE_PCI_H__ +#define __UNICORE_PCI_H__ + +#ifdef __KERNEL__ +#include +#include +#include /* for PCIBIOS_MIN_* */ + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c new file mode 100644 index 000000000000..d4e55e2d2d29 --- /dev/null +++ b/arch/unicore32/kernel/pci.c @@ -0,0 +1,404 @@ +/* + * linux/arch/unicore32/kernel/pci.c + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Copyright (C) 2001-2010 GUAN Xue-tao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * PCI bios-type initialisation for PCI machines + * + */ +#include +#include +#include +#include +#include +#include +#include + +static int debug_pci; +static int use_firmware; + +#define CONFIG_CMD(bus, devfn, where) \ + (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) + +static int +puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + PCICFG_ADDR = CONFIG_CMD(bus, devfn, where); + switch (size) { + case 1: + *value = (PCICFG_DATA >> ((where & 3) * 8)) & 0xFF; + break; + case 2: + *value = (PCICFG_DATA >> ((where & 2) * 8)) & 0xFFFF; + break; + case 4: + *value = PCICFG_DATA; + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int +puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + PCICFG_ADDR = CONFIG_CMD(bus, devfn, where); + switch (size) { + case 1: + PCICFG_DATA = (PCICFG_DATA & ~FMASK(8, (where&3)*8)) + | FIELD(value, 8, (where&3)*8); + break; + case 2: + PCICFG_DATA = (PCICFG_DATA & ~FMASK(16, (where&2)*8)) + | FIELD(value, 16, (where&2)*8); + break; + case 4: + PCICFG_DATA = value; + break; + } + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops pci_puv3_ops = { + .read = puv3_read_config, + .write = puv3_write_config, +}; + +void pci_puv3_preinit(void) +{ + printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n"); + /* config PCI bridge base */ + PCICFG_BRIBASE = PKUNITY_PCIBRI_BASE; + + PCIBRI_AHBCTL0 = 0; + PCIBRI_AHBBAR0 = PKUNITY_PCIBRI_BASE | PCIBRI_BARx_MEM; + PCIBRI_AHBAMR0 = 0xFFFF0000; + PCIBRI_AHBTAR0 = 0; + + PCIBRI_AHBCTL1 = PCIBRI_CTLx_AT; + PCIBRI_AHBBAR1 = PKUNITY_PCILIO_BASE | PCIBRI_BARx_IO; + PCIBRI_AHBAMR1 = 0xFFFF0000; + PCIBRI_AHBTAR1 = 0x00000000; + + PCIBRI_AHBCTL2 = PCIBRI_CTLx_PREF; + PCIBRI_AHBBAR2 = PKUNITY_PCIMEM_BASE | PCIBRI_BARx_MEM; + PCIBRI_AHBAMR2 = 0xF8000000; + PCIBRI_AHBTAR2 = 0; + + PCIBRI_BAR1 = PKUNITY_PCIAHB_BASE | PCIBRI_BARx_MEM; + + PCIBRI_PCICTL0 = PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF; + PCIBRI_PCIBAR0 = PKUNITY_PCIAHB_BASE | PCIBRI_BARx_MEM; + PCIBRI_PCIAMR0 = 0xF8000000; + PCIBRI_PCITAR0 = PKUNITY_SDRAM_BASE; + + PCIBRI_CMD = PCIBRI_CMD | PCIBRI_CMD_IO | PCIBRI_CMD_MEM; +} + +static int __init pci_puv3_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (dev->bus->number == 0) { +#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */ + if (dev->devfn == 0x00) + return IRQ_PCIINTA; + else if (dev->devfn == 0x08) + return IRQ_PCIINTB; + else if (dev->devfn == 0x10) + return IRQ_PCIINTC; + else if (dev->devfn == 0x18) + return IRQ_PCIINTD; +#endif +#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */ + if (dev->devfn == 0x30) + return IRQ_PCIINTB; + else if (dev->devfn == 0x60) + return IRQ_PCIINTC; + else if (dev->devfn == 0x58) + return IRQ_PCIINTD; +#endif +#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919) + /* only support 2 pci devices */ + if (dev->devfn == 0x00) + return IRQ_PCIINTC; /* sata */ +#endif + } + return -1; +} + +/* + * Only first 128MB of memory can be accessed via PCI. + * We use GFP_DMA to allocate safe buffers to do map/unmap. + * This is really ugly and we need a better way of specifying + * DMA-capable regions of memory. + */ +void __init puv3_pci_adjust_zones(unsigned long *zone_size, + unsigned long *zhole_size) +{ + unsigned int sz = SZ_128M >> PAGE_SHIFT; + + /* + * Only adjust if > 128M on current system + */ + if (zone_size[0] <= sz) + return; + + zone_size[1] = zone_size[0] - sz; + zone_size[0] = sz; + zhole_size[1] = zhole_size[0]; + zhole_size[0] = 0; +} + +void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) +{ + if (debug_pci) + printk(KERN_DEBUG "PCI: Assigning IRQ %02d to %s\n", + irq, pci_name(dev)); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * If the bus contains any of these devices, then we must not turn on + * parity checking of any kind. + */ +static inline int pdev_bad_for_parity(struct pci_dev *dev) +{ + return 0; +} + +/* + * pcibios_fixup_bus - Called after each bus is probed, + * but before its children are examined. + */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + u16 features = PCI_COMMAND_SERR + | PCI_COMMAND_PARITY + | PCI_COMMAND_FAST_BACK; + + bus->resource[0] = &ioport_resource; + bus->resource[1] = &iomem_resource; + + /* + * Walk the devices on this bus, working out what we can + * and can't support. + */ + list_for_each_entry(dev, &bus->devices, bus_list) { + u16 status; + + pci_read_config_word(dev, PCI_STATUS, &status); + + /* + * If any device on this bus does not support fast back + * to back transfers, then the bus as a whole is not able + * to support them. Having fast back to back transfers + * on saves us one PCI cycle per transaction. + */ + if (!(status & PCI_STATUS_FAST_BACK)) + features &= ~PCI_COMMAND_FAST_BACK; + + if (pdev_bad_for_parity(dev)) + features &= ~(PCI_COMMAND_SERR + | PCI_COMMAND_PARITY); + + switch (dev->class >> 8) { + case PCI_CLASS_BRIDGE_PCI: + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status); + status |= PCI_BRIDGE_CTL_PARITY + | PCI_BRIDGE_CTL_MASTER_ABORT; + status &= ~(PCI_BRIDGE_CTL_BUS_RESET + | PCI_BRIDGE_CTL_FAST_BACK); + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status); + break; + + case PCI_CLASS_BRIDGE_CARDBUS: + pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL, + &status); + status |= PCI_CB_BRIDGE_CTL_PARITY + | PCI_CB_BRIDGE_CTL_MASTER_ABORT; + pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL, + status); + break; + } + } + + /* + * Now walk the devices again, this time setting them up. + */ + list_for_each_entry(dev, &bus->devices, bus_list) { + u16 cmd; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= features; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, + L1_CACHE_BYTES >> 2); + } + + /* + * Propagate the flags to the PCI bridge. + */ + if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + if (features & PCI_COMMAND_FAST_BACK) + bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK; + if (features & PCI_COMMAND_PARITY) + bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY; + } + + /* + * Report what we did for this bus + */ + printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", + bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); +} +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_fixup_bus); +#endif + +static int __init pci_common_init(void) +{ + struct pci_bus *puv3_bus; + + pci_puv3_preinit(); + + puv3_bus = pci_scan_bus(0, &pci_puv3_ops, NULL); + + if (!puv3_bus) + panic("PCI: unable to scan bus!"); + + pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq); + + if (!use_firmware) { + /* + * Size the bridge windows. + */ + pci_bus_size_bridges(puv3_bus); + + /* + * Assign resources. + */ + pci_bus_assign_resources(puv3_bus); + } + + /* + * Tell drivers about devices found. + */ + pci_bus_add_devices(puv3_bus); + + return 0; +} +subsys_initcall(pci_common_init); + +char * __devinit pcibios_setup(char *str) +{ + if (!strcmp(str, "debug")) { + debug_pci = 1; + return NULL; + } else if (!strcmp(str, "firmware")) { + use_firmware = 1; + return NULL; + } + return str; +} + +/* + * From arch/i386/kernel/pci-i386.c: + * + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might be mirrored at 0x0100-0x03ff.. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO && start & 0x300) + start = (start + 0x3ff) & ~0x3ff; + + start = (start + align - 1) & ~(align - 1); + + return start; +} + +/** + * pcibios_enable_device - Enable I/O and memory. + * @dev: PCI device to be enabled + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx = 0; idx < 6; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1 << idx))) + continue; + + r = dev->resource + idx; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because" + " of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + + /* + * Bridges (eg, cardbus bridges) need to be fully enabled + */ + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) + cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + + if (cmd != old_cmd) { + printk("PCI: enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + unsigned long phys; + + if (mmap_state == pci_mmap_io) + return -EINVAL; + + phys = vma->vm_pgoff; + + /* + * Mark this as IO + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (remap_pfn_range(vma, vma->vm_start, phys, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 98e6fdf34d30..77cf813ba264 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o obj-$(CONFIG_X86) += setup-bus.o obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o +obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o obj-$(CONFIG_PARISC) += setup-bus.o obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o obj-$(CONFIG_PPC) += setup-bus.o -- 2.20.1