From 6e602ef73334550bbbb8be1041a3ce6eecbd42f1 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Mon, 24 Feb 2014 18:37:36 +0800 Subject: [PATCH] mtd: spi-nor: add the basic data structures The spi_nor{} is cloned from the m25p{}. The spi_nor{} can be used by both the m25p80 and spi-nor controller. We also add the spi_nor_xfer_cfg{} which can be used by the two fundamental primitives: read_xfer/write_xfer. 1) the hooks for spi_nor{}: @prepare/unpreare: used to do some work before or after the read/write/erase/lock/unlock. @read_xfer/write_xfer: We can use these two hooks to code all the following hooks if the driver tries to implement them by itself. @read_reg: used to read the registers, such as read status register, read configure register. @write_reg: used to write the registers, such as write enable, erase sector. @read_id: read out the ID info. @wait_till_ready: wait till the NOR becomes ready. @read: read out the data from the NOR. @write: write data to the NOR. @erase: erase a sector of the NOR. 2) Add a new field sst_write_second for the SST NOR write. Signed-off-by: Huang Shijie Acked-by: Marek Vasut Signed-off-by: Brian Norris --- include/linux/mtd/spi-nor.h | 110 ++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 483fc2a086c4..3a3c3872c8cd 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -52,4 +52,114 @@ /* Configuration Register bits. */ #define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ +enum read_mode { + SPI_NOR_NORMAL = 0, + SPI_NOR_FAST, + SPI_NOR_DUAL, + SPI_NOR_QUAD, +}; + +/** + * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer + * @wren: command for "Write Enable", or 0x00 for not required + * @cmd: command for operation + * @cmd_pins: number of pins to send @cmd (1, 2, 4) + * @addr: address for operation + * @addr_pins: number of pins to send @addr (1, 2, 4) + * @addr_width: number of address bytes + * (3,4, or 0 for address not required) + * @mode: mode data + * @mode_pins: number of pins to send @mode (1, 2, 4) + * @mode_cycles: number of mode cycles (0 for mode not required) + * @dummy_cycles: number of dummy cycles (0 for dummy not required) + */ +struct spi_nor_xfer_cfg { + u8 wren; + u8 cmd; + u8 cmd_pins; + u32 addr; + u8 addr_pins; + u8 addr_width; + u8 mode; + u8 mode_pins; + u8 mode_cycles; + u8 dummy_cycles; +}; + +#define SPI_NOR_MAX_CMD_SIZE 8 +enum spi_nor_ops { + SPI_NOR_OPS_READ = 0, + SPI_NOR_OPS_WRITE, + SPI_NOR_OPS_ERASE, + SPI_NOR_OPS_LOCK, + SPI_NOR_OPS_UNLOCK, +}; + +/** + * struct spi_nor - Structure for defining a the SPI NOR layer + * @mtd: point to a mtd_info structure + * @lock: the lock for the read/write/erase/lock/unlock operations + * @dev: point to a spi device, or a spi nor controller device. + * @page_size: the page size of the SPI NOR + * @addr_width: number of address bytes + * @erase_opcode: the opcode for erasing a sector + * @read_opcode: the read opcode + * @read_dummy: the dummy needed by the read operation + * @program_opcode: the program opcode + * @flash_read: the mode of the read + * @sst_write_second: used by the SST write operation + * @cfg: used by the read_xfer/write_xfer + * @cmd_buf: used by the write_reg + * @prepare: [OPTIONAL] do some preparations for the + * read/write/erase/lock/unlock operations + * @unprepare: [OPTIONAL] do some post work after the + * read/write/erase/lock/unlock operations + * @read_xfer: [OPTIONAL] the read fundamental primitive + * @write_xfer: [OPTIONAL] the writefundamental primitive + * @read_reg: [DRIVER-SPECIFIC] read out the register + * @write_reg: [DRIVER-SPECIFIC] write data to the register + * @read_id: [REPLACEABLE] read out the ID data, and find + * the proper spi_device_id + * @wait_till_ready: [REPLACEABLE] wait till the NOR becomes ready + * @read: [DRIVER-SPECIFIC] read data from the SPI NOR + * @write: [DRIVER-SPECIFIC] write data to the SPI NOR + * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR + * at the offset @offs + * @priv: the private data + */ +struct spi_nor { + struct mtd_info *mtd; + struct mutex lock; + struct device *dev; + u32 page_size; + u8 addr_width; + u8 erase_opcode; + u8 read_opcode; + u8 read_dummy; + u8 program_opcode; + enum read_mode flash_read; + bool sst_write_second; + struct spi_nor_xfer_cfg cfg; + u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; + + int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); + void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); + int (*read_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, + u8 *buf, size_t len); + int (*write_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, + u8 *buf, size_t len); + int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len, + int write_enable); + const struct spi_device_id *(*read_id)(struct spi_nor *nor); + int (*wait_till_ready)(struct spi_nor *nor); + + int (*read)(struct spi_nor *nor, loff_t from, + size_t len, size_t *retlen, u_char *read_buf); + void (*write)(struct spi_nor *nor, loff_t to, + size_t len, size_t *retlen, const u_char *write_buf); + int (*erase)(struct spi_nor *nor, loff_t offs); + + void *priv; +}; #endif -- 2.20.1