From 6dc59e7a195fc8852e98d64805f44c46c35e40cd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 27 May 2015 07:15:50 -0300 Subject: [PATCH] [media] DocBook: better document FE_SET_TONE ioctl Use the proper format for FE_SET_TONE documentation and improve the documentation. Keep the enum fe_sec_tone_mode description together with the ioctl, as both are used together. Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/dvb/fe-set-tone.xml | 88 +++++++++++++++++++ Documentation/DocBook/media/dvb/frontend.xml | 61 +------------ include/uapi/linux/dvb/frontend.h | 6 +- 3 files changed, 93 insertions(+), 62 deletions(-) create mode 100644 Documentation/DocBook/media/dvb/fe-set-tone.xml diff --git a/Documentation/DocBook/media/dvb/fe-set-tone.xml b/Documentation/DocBook/media/dvb/fe-set-tone.xml new file mode 100644 index 000000000000..b4b1f5303170 --- /dev/null +++ b/Documentation/DocBook/media/dvb/fe-set-tone.xml @@ -0,0 +1,88 @@ + + + ioctl FE_SET_TONE + &manvol; + + + + FE_SET_TONE + Sets/resets the generation of the continuous 22kHz tone. + + + + + + int ioctl + int fd + int request + &fe-sec-tone-mode; *tone + + + + + + Arguments + + + fd + + &fe_fd; + + + + request + + FE_SET_TONE + + + + pointer to &fe-sec-tone-mode; + + + + + + Description + +This ioctl is used to set the generation of the continuous 22kHz tone. + This call requires read/write permissions. +Usually, satellital antenna subsystems require that the digital TV + device to send a 22kHz tone in order to select between high/low band on + some dual-band LNBf. It is also used to send signals to DiSEqC equipment, + but this is done using the DiSEqC ioctls. +NOTE: if more than one device is connected to the same antenna, + setting a tone may interfere on other devices, as they may lose + the capability of selecting the band. So, it is recommended that + applications would change to SEC_TONE_OFF when the device is not used. + +&return-value-dvb; + + +
+enum fe_sec_voltage + + + enum fe_sec_tone_mode + + &cs-def; + + + ID + Description + + + + + SEC_TONE_ON + Sends a 22kHz tone burst to the antenna + + SEC_TONE_OFF + Don't send a 22kHz tone to the antenna + (except if the FE_DISEQC_* ioctls are called) + + + +
+
+ + diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index 584c759b6bbe..f05da4abb3fe 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -75,21 +75,6 @@ specification is available at -
-SEC continuous tone - -The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the -high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to -be switched consistently to the DiSEqC commands as described in the DiSEqC -spec. - - typedef enum fe_sec_tone_mode { - SEC_TONE_ON, - SEC_TONE_OFF - } fe_sec_tone_mode_t; - -
-
SEC tone burst @@ -582,52 +567,8 @@ typedef enum fe_hierarchy { &return-value-dvb;
-
-FE_SET_TONE -DESCRIPTION - - -This call is used to set the generation of the continuous 22kHz tone. This call - requires read/write permissions. - - -SYNOPSIS - - -int ioctl(int fd, int request = FE_SET_TONE, - fe_sec_tone_mode_t tone); - - -PARAMETERS - - -int fd - -File descriptor returned by a previous call to open(). - - -int request - -Equals FE_SET_TONE for this command. - - -fe_sec_tone_mode_t - tone - -The requested tone generation mode (on/off). - - -&return-value-dvb; -
+&sub-fe-set-tone; &sub-fe-set-voltage; &sub-fe-enable-high-lnb-voltage; &sub-fe-set-frontend-tune-mode; diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index c1ccbc82024c..1a098819473f 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -114,10 +114,12 @@ enum fe_sec_voltage { typedef enum fe_sec_voltage fe_sec_voltage_t; -typedef enum fe_sec_tone_mode { +enum fe_sec_tone_mode { SEC_TONE_ON, SEC_TONE_OFF -} fe_sec_tone_mode_t; +}; + +typedef enum fe_sec_tone_mode fe_sec_tone_mode_t; typedef enum fe_sec_mini_cmd { -- 2.20.1