From 6d713c1531638df8d459d248a89948318cbeec4c Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Fri, 9 Jan 2015 13:39:10 +0100 Subject: [PATCH] usb: dwc2: gadget: report disconnection after reset If usb bus is reset without a physical disconnection, all endpoints will remain open. Call s3c_hsotg_disconnect() from reset handler to report a disconnect to gadget framework. hsotg->connected is checked in s3c_hsotg_disconnect() before processing disconnect. In some cases, USBRst is seen before EnumDone and after it as well. So move setting of hsotg->connected to set-address to avoid reporting extra disconnection in this case. Tested-by: Robert Baldyga Acked-by: Paul Zimmerman Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index df9080d20606..882a1a8953f5 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1103,6 +1103,7 @@ static void s3c_hsotg_process_control(struct dwc2_hsotg *hsotg, if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: + hsotg->connected = 1; dcfg = readl(hsotg->regs + DCFG); dcfg &= ~DCFG_DEVADDR_MASK; dcfg |= (le16_to_cpu(ctrl->wValue) << @@ -2305,7 +2306,6 @@ irq_retry: writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS); s3c_hsotg_irq_enumdone(hsotg); - hsotg->connected = 1; } if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) { @@ -2343,6 +2343,9 @@ irq_retry: writel(GINTSTS_USBRST, hsotg->regs + GINTSTS); + /* Report disconnection if it is not already done. */ + s3c_hsotg_disconnect(hsotg); + if (usb_status & GOTGCTL_BSESVLD) { if (time_after(jiffies, hsotg->last_rst + msecs_to_jiffies(200))) { -- 2.20.1