From 6c4e976785011dfbe461821d0bfc58cfd60eac56 Mon Sep 17 00:00:00 2001 From: Cyril Bur Date: Fri, 17 Feb 2017 14:28:49 +1100 Subject: [PATCH] drivers/misc: Add Aspeed LPC control driver In order to manage server systems, there is typically another processor known as a BMC (Baseboard Management Controller) which is responsible for powering the server and other various elements, sometimes fans, often the system flash. The Aspeed BMC family which is what is used on OpenPOWER machines and a number of x86 as well is typically connected to the host via an LPC (Low Pin Count) bus (among others). The LPC bus is an ISA bus on steroids. It's generally used by the BMC chip to provide the host with access to the system flash (via MEM/FW cycles) that contains the BIOS or other host firmware along with a number of SuperIO-style IOs (via IO space) such as UARTs, IPMI controllers. On the BMC chip side, this is all configured via a bunch of registers whose content is related to a given policy of what devices are exposed at a per system level, which is system/vendor specific, so we don't want to bolt that into the BMC kernel. This started with a need to provide something nicer than /dev/mem for user space to configure these things. One important aspect of the configuration is how the MEM/FW space is exposed to the host (ie, the x86 or POWER). Some registers in that bridge can define a window remapping all or portion of the LPC MEM/FW space to a portion of the BMC internal bus, with no specific limits imposed in HW. I think it makes sense to ensure that this window is configured by a kernel driver that can apply some serious sanity checks on what it is configured to map. In practice, user space wants to control this by flipping the mapping between essentially two types of portions of the BMC address space: - The flash space. This is a region of the BMC MMIO space that more/less directly maps the system flash (at least for reads, writes are somewhat more complicated). - One (or more) reserved area(s) of the BMC physical memory. The latter is needed for a number of things, such as avoiding letting the host manipulate the innards of the BMC flash controller via some evil backdoor, we want to do flash updates by routing the window to a portion of memory (under control of a mailbox protocol via some separate set of registers) which the host can use to write new data in bulk and then request the BMC to flash it. There are other uses, such as allowing the host to boot from an in-memory flash image rather than the one in flash (very handy for continuous integration and test, the BMC can just download new images). It is important to note that due to the way the Aspeed chip lets the kernel configure the mapping between host LPC addresses and BMC ram addresses the offset within the window must be a multiple of size. Not doing so will fragment the accessible space rather than simply moving 'zero' upwards. This is caused by the nature of HICR8 being a mask and the way host LPC addresses are translated. Signed-off-by: Cyril Bur Reviewed-by: Joel Stanley Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 8 + drivers/misc/Makefile | 1 + drivers/misc/aspeed-lpc-ctrl.c | 267 +++++++++++++++++++++++++++ include/uapi/linux/aspeed-lpc-ctrl.h | 60 ++++++ 4 files changed, 336 insertions(+) create mode 100644 drivers/misc/aspeed-lpc-ctrl.c create mode 100644 include/uapi/linux/aspeed-lpc-ctrl.h diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index c290990d73ed..77b001e7cf85 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -771,6 +771,14 @@ config PANEL_BOOT_MESSAGE endif # PANEL +config ASPEED_LPC_CTRL + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON + tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control" + ---help--- + Control Aspeed ast2400/2500 HOST LPC to BMC mappings through + ioctl()s, the driver also provides a read/write interface to a BMC ram + region where the host LPC read/write region can be buffered. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7a3ea89339b4..4925ea8e1952 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ obj-$(CONFIG_PANEL) += panel.o +obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/misc/aspeed-lpc-ctrl.c new file mode 100644 index 000000000000..f6acbe1d9378 --- /dev/null +++ b/drivers/misc/aspeed-lpc-ctrl.c @@ -0,0 +1,267 @@ +/* + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DEVICE_NAME "aspeed-lpc-ctrl" + +#define HICR7 0x8 +#define HICR8 0xc + +struct aspeed_lpc_ctrl { + struct miscdevice miscdev; + struct regmap *regmap; + phys_addr_t mem_base; + resource_size_t mem_size; + u32 pnor_size; + u32 pnor_base; +}; + +static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file) +{ + return container_of(file->private_data, struct aspeed_lpc_ctrl, + miscdev); +} + +static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); + unsigned long vsize = vma->vm_end - vma->vm_start; + pgprot_t prot = vma->vm_page_prot; + + if (vma->vm_pgoff + vsize > lpc_ctrl->mem_base + lpc_ctrl->mem_size) + return -EINVAL; + + /* ast2400/2500 AHB accesses are not cache coherent */ + prot = pgprot_dmacoherent(prot); + + if (remap_pfn_range(vma, vma->vm_start, + (lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff, + vsize, prot)) + return -EAGAIN; + + return 0; +} + +static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd, + unsigned long param) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); + void __user *p = (void __user *)param; + struct aspeed_lpc_ctrl_mapping map; + u32 addr; + u32 size; + long rc; + + if (copy_from_user(&map, p, sizeof(map))) + return -EFAULT; + + if (map.flags != 0) + return -EINVAL; + + switch (cmd) { + case ASPEED_LPC_CTRL_IOCTL_GET_SIZE: + /* The flash windows don't report their size */ + if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY) + return -EINVAL; + + /* Support more than one window id in the future */ + if (map.window_id != 0) + return -EINVAL; + + map.size = lpc_ctrl->mem_size; + + return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0; + case ASPEED_LPC_CTRL_IOCTL_MAP: + + /* + * The top half of HICR7 is the MSB of the BMC address of the + * mapping. + * The bottom half of HICR7 is the MSB of the HOST LPC + * firmware space address of the mapping. + * + * The 1 bits in the top of half of HICR8 represent the bits + * (in the requested address) that should be ignored and + * replaced with those from the top half of HICR7. + * The 1 bits in the bottom half of HICR8 represent the bits + * (in the requested address) that should be kept and pass + * into the BMC address space. + */ + + /* + * It doesn't make sense to talk about a size or offset with + * low 16 bits set. Both HICR7 and HICR8 talk about the top 16 + * bits of addresses and sizes. + */ + + if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff)) + return -EINVAL; + + /* + * Because of the way the masks work in HICR8 offset has to + * be a multiple of size. + */ + if (map.offset & (map.size - 1)) + return -EINVAL; + + if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) { + addr = lpc_ctrl->pnor_base; + size = lpc_ctrl->pnor_size; + } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) { + addr = lpc_ctrl->mem_base; + size = lpc_ctrl->mem_size; + } else { + return -EINVAL; + } + + /* Check overflow first! */ + if (map.offset + map.size < map.offset || + map.offset + map.size > size) + return -EINVAL; + + if (map.size == 0 || map.size > size) + return -EINVAL; + + addr += map.offset; + + /* + * addr (host lpc address) is safe regardless of values. This + * simply changes the address the host has to request on its + * side of the LPC bus. This cannot impact the hosts own + * memory space by surprise as LPC specific accessors are + * required. The only strange thing that could be done is + * setting the lower 16 bits but the shift takes care of that. + */ + + rc = regmap_write(lpc_ctrl->regmap, HICR7, + (addr | (map.addr >> 16))); + if (rc) + return rc; + + return regmap_write(lpc_ctrl->regmap, HICR8, + (~(map.size - 1)) | ((map.size >> 16) - 1)); + } + + return -EINVAL; +} + +static const struct file_operations aspeed_lpc_ctrl_fops = { + .owner = THIS_MODULE, + .mmap = aspeed_lpc_ctrl_mmap, + .unlocked_ioctl = aspeed_lpc_ctrl_ioctl, +}; + +static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) +{ + struct aspeed_lpc_ctrl *lpc_ctrl; + struct device_node *node; + struct resource resm; + struct device *dev; + int rc; + + dev = &pdev->dev; + + lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL); + if (!lpc_ctrl) + return -ENOMEM; + + node = of_parse_phandle(dev->of_node, "flash", 0); + if (!node) { + dev_err(dev, "Didn't find host pnor flash node\n"); + return -ENODEV; + } + + rc = of_address_to_resource(node, 1, &resm); + of_node_put(node); + if (rc) { + dev_err(dev, "Couldn't address to resource for flash\n"); + return rc; + } + + lpc_ctrl->pnor_size = resource_size(&resm); + lpc_ctrl->pnor_base = resm.start; + + dev_set_drvdata(&pdev->dev, lpc_ctrl); + + node = of_parse_phandle(dev->of_node, "memory-region", 0); + if (!node) { + dev_err(dev, "Didn't find reserved memory\n"); + return -EINVAL; + } + + rc = of_address_to_resource(node, 0, &resm); + of_node_put(node); + if (rc) { + dev_err(dev, "Couldn't address to resource for reserved memory\n"); + return -ENOMEM; + } + + lpc_ctrl->mem_size = resource_size(&resm); + lpc_ctrl->mem_base = resm.start; + + lpc_ctrl->regmap = syscon_node_to_regmap( + pdev->dev.parent->of_node); + if (IS_ERR(lpc_ctrl->regmap)) { + dev_err(dev, "Couldn't get regmap\n"); + return -ENODEV; + } + + lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR; + lpc_ctrl->miscdev.name = DEVICE_NAME; + lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops; + lpc_ctrl->miscdev.parent = dev; + rc = misc_register(&lpc_ctrl->miscdev); + if (rc) + dev_err(dev, "Unable to register device\n"); + else + dev_info(dev, "Loaded at 0x%08x (0x%08x)\n", + lpc_ctrl->mem_base, lpc_ctrl->mem_size); + + return rc; +} + +static int aspeed_lpc_ctrl_remove(struct platform_device *pdev) +{ + struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev); + + misc_deregister(&lpc_ctrl->miscdev); + + return 0; +} + +static const struct of_device_id aspeed_lpc_ctrl_match[] = { + { .compatible = "aspeed,ast2400-lpc-ctrl" }, + { .compatible = "aspeed,ast2500-lpc-ctrl" }, + { }, +}; + +static struct platform_driver aspeed_lpc_ctrl_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_lpc_ctrl_match, + }, + .probe = aspeed_lpc_ctrl_probe, + .remove = aspeed_lpc_ctrl_remove, +}; + +module_platform_driver(aspeed_lpc_ctrl_driver); + +MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cyril Bur "); +MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings"); diff --git a/include/uapi/linux/aspeed-lpc-ctrl.h b/include/uapi/linux/aspeed-lpc-ctrl.h new file mode 100644 index 000000000000..f96fa995a3f0 --- /dev/null +++ b/include/uapi/linux/aspeed-lpc-ctrl.h @@ -0,0 +1,60 @@ +/* + * Copyright 2017 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_ASPEED_LPC_CTRL_H +#define _UAPI_LINUX_ASPEED_LPC_CTRL_H + +#include + +/* Window types */ +#define ASPEED_LPC_CTRL_WINDOW_FLASH 1 +#define ASPEED_LPC_CTRL_WINDOW_MEMORY 2 + +/* + * This driver provides a window for the host to access a BMC resource + * across the BMC <-> Host LPC bus. + * + * window_type: The BMC resource that the host will access through the + * window. BMC flash and BMC RAM. + * + * window_id: For each window type there may be multiple windows, + * these are referenced by ID. + * + * flags: Reserved for future use, this field is expected to be + * zeroed. + * + * addr: Address on the host LPC bus that the specified window should + * be mapped. This address must be power of two aligned. + * + * offset: Offset into the BMC window that should be mapped to the + * host (at addr). This must be a multiple of size. + * + * size: The size of the mapping. The smallest possible size is 64K. + * This must be power of two aligned. + * + */ + +struct aspeed_lpc_ctrl_mapping { + __u8 window_type; + __u8 window_id; + __u16 flags; + __u32 addr; + __u32 offset; + __u32 size; +}; + +#define __ASPEED_LPC_CTRL_IOCTL_MAGIC 0xb2 + +#define ASPEED_LPC_CTRL_IOCTL_GET_SIZE _IOWR(__ASPEED_LPC_CTRL_IOCTL_MAGIC, \ + 0x00, struct aspeed_lpc_ctrl_mapping) + +#define ASPEED_LPC_CTRL_IOCTL_MAP _IOW(__ASPEED_LPC_CTRL_IOCTL_MAGIC, \ + 0x01, struct aspeed_lpc_ctrl_mapping) + +#endif /* _UAPI_LINUX_ASPEED_LPC_CTRL_H */ -- 2.20.1