From 6baeda120d90aa637b08f7604de104ab00ce9126 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 31 Aug 2017 14:51:40 +0200 Subject: [PATCH] usb: gadget: udc: atmel: set vbus irqflags explicitly The driver triggers actions on both edges of the vbus signal. The former PIO controller was triggering IRQs on both falling and rising edges by default. Newer PIO controller don't, so it's better to set it explicitly to IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING. Without this patch we may trigger the connection with host but only on some bouncing signal conditions and thus lose connecting events. Acked-by: Ludovic Desroches Signed-off-by: Nicolas Ferre Cc: stable # v4.4+ Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 98d71400f8a1..a884c022df7a 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -29,6 +29,8 @@ #include #include "atmel_usba_udc.h" +#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \ + | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING) #ifdef CONFIG_USB_GADGET_DEBUG_FS #include @@ -2361,7 +2363,7 @@ static int usba_udc_probe(struct platform_device *pdev) IRQ_NOAUTOEN); ret = devm_request_threaded_irq(&pdev->dev, gpio_to_irq(udc->vbus_pin), NULL, - usba_vbus_irq_thread, IRQF_ONESHOT, + usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, "atmel_usba_udc", udc); if (ret) { udc->vbus_pin = -ENODEV; -- 2.20.1