From 6aeb75e6adfaed16e58780309613a578fe1ee90b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 11 May 2017 11:41:21 +0200 Subject: [PATCH] USB: serial: io_ti: fix div-by-zero in set_termios Fix a division-by-zero in set_termios when debugging is enabled and a high-enough speed has been requested so that the divisor value becomes zero. Instead of just fixing the offending debug statement, cap the baud rate at the base as a zero divisor value also appears to crash the firmware. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable # 2.6.12 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/io_ti.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 87798e625d6c..6cefb9cb133d 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2336,8 +2336,11 @@ static void change_port_settings(struct tty_struct *tty, if (!baud) { /* pick a default, any default... */ baud = 9600; - } else + } else { + /* Avoid a zero divisor. */ + baud = min(baud, 461550); tty_encode_baud_rate(tty, baud, baud); + } edge_port->baud_rate = baud; config->wBaudRate = (__u16)((461550L + baud/2) / baud); -- 2.20.1