From 6a92f732f557401ca8cc0b16f8e8914c133cf6c6 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 16 Dec 2011 00:46:12 +0000 Subject: [PATCH] e1000e: use default settings for Tx Inter Packet Gap timer Use the default hardware values for TIPG except for 80003es2lan(*). The code that is removed in this patch is either unnecessarily writing the TIPG register with the hardware default values for some devices (82571/2/3/4) or writing the wrong value for others (ICH/PCH LOMs). The only change in functionality is setting the correct default TIPG for the latter devices. (*) The correct value for 80003es2lan is already set properly in e1000_init_hw_80003es2lan() and e1000_cfg_kmrn_{10_100|1000}_80003es2lan(), and the unused flag FLAG_TIPG_MEDIUM_FOR_80003ESLAN is removed. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/80003es2lan.c | 3 +-- drivers/net/ethernet/intel/e1000e/e1000.h | 2 +- drivers/net/ethernet/intel/e1000e/netdev.c | 15 +-------------- 3 files changed, 3 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index e1159e54334a..b3a235c8ed85 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1502,8 +1502,7 @@ const struct e1000_info e1000_es2_info = { | FLAG_RX_NEEDS_RESTART /* errata */ | FLAG_TARC_SET_BIT_ZERO /* errata */ | FLAG_APME_CHECK_PORT_B - | FLAG_DISABLE_FC_PAUSE_TIME /* errata */ - | FLAG_TIPG_MEDIUM_FOR_80003ESLAN, + | FLAG_DISABLE_FC_PAUSE_TIME, /* errata */ .flags2 = FLAG2_DMA_BURST, .pba = 38, .max_hw_frame_size = DEFAULT_JUMBO, diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index db604cdd998c..4b3a27670a6b 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -430,7 +430,7 @@ struct e1000_info { #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) #define FLAG_IS_QUAD_PORT (1 << 13) -#define FLAG_TIPG_MEDIUM_FOR_80003ESLAN (1 << 14) +/* reserved bit14 */ #define FLAG_APME_IN_WUC (1 << 15) #define FLAG_APME_IN_CTRL3 (1 << 16) #define FLAG_APME_CHECK_PORT_B (1 << 17) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 6081dee5ce46..fb299905b1f1 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2770,8 +2770,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_ring *tx_ring = adapter->tx_ring; u64 tdba; - u32 tdlen, tctl, tipg, tarc; - u32 ipgr1, ipgr2; + u32 tdlen, tctl, tarc; /* Setup the HW Tx Head and Tail descriptor pointers */ tdba = tx_ring->dma; @@ -2784,18 +2783,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) tx_ring->head = adapter->hw.hw_addr + E1000_TDH; tx_ring->tail = adapter->hw.hw_addr + E1000_TDT; - /* Set the default values for the Tx Inter Packet Gap timer */ - tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */ - ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */ - ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */ - - if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN) - ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */ - - tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT; - tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT; - ew32(TIPG, tipg); - /* Set the Tx Interrupt Delay register */ ew32(TIDV, adapter->tx_int_delay); /* Tx irq moderation */ -- 2.20.1