From 68db9bc814362e7f24371c27d12a4f34477d9356 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Fri, 28 Oct 2016 10:52:06 +0200 Subject: [PATCH] PCI: pciehp: Add runtime PM support for PCIe hotplug ports Linux 4.8 added support for runtime suspending PCIe ports to D3hot with commit 006d44e49a25 ("PCI: Add runtime PM support for PCIe ports"), but excluded hotplug ports. Those are now afforded runtime PM by the present commit. Hotplug ports require a few extra considerations: - The configuration space of the port remains accessible in D3hot, so all the functions to read or modify the Slot Status and Slot Control registers need not be modified. Even turning on slot power doesn't seem to require the port to be in D0, at least the PCIe spec doesn't say so and I confirmed that by testing with a Thunderbolt controller. - However D0 is required to access devices on the secondary bus. This happens in pciehp_check_link_status() and pciehp_configure_device() (both called from board_added()) and in pciehp_unconfigure_device() (called from remove_board()), so acquire a runtime PM ref for their invocation. - The hotplug port stays active as long as it has active children. If all hotplugged devices below the port runtime suspend, the port is allowed to runtime suspend as well. Plug and unplug detection continues to work in D3hot. - Hotplug interrupts are delivered in-band, so while the hotplug port itself is allowed to go to D3hot, its parent ports must stay in D0 for interrupts to come through. Add a corresponding restriction to pci_dev_check_d3cold(). - Runtime PM may only be allowed if the hotplug port is handled natively by the OS. On ACPI systems, the port may alternatively be handled by the firmware and things break if the OS puts the port into D3 behind the firmware's back: E.g. Thunderbolt hotplug ports on non-Macs are handled by Intel's firmware in System Management Mode and the firmware is known to access devices on the port's secondary bus without checking first if the port is in D0: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki CC: Mika Westerberg --- drivers/pci/hotplug/pciehp_ctrl.c | 6 ++++++ drivers/pci/pci.c | 12 ++++++------ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index efe69e879455..ffd3fe6646c2 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include "../pci.h" #include "pciehp.h" @@ -98,6 +99,7 @@ static int board_added(struct slot *p_slot) pciehp_green_led_blink(p_slot); /* Check link training status */ + pm_runtime_get_sync(&ctrl->pcie->port->dev); retval = pciehp_check_link_status(ctrl); if (retval) { ctrl_err(ctrl, "Failed to check link status\n"); @@ -118,12 +120,14 @@ static int board_added(struct slot *p_slot) if (retval != -EEXIST) goto err_exit; } + pm_runtime_put(&ctrl->pcie->port->dev); pciehp_green_led_on(p_slot); pciehp_set_attention_status(p_slot, 0); return 0; err_exit: + pm_runtime_put(&ctrl->pcie->port->dev); set_slot_off(ctrl, p_slot); return retval; } @@ -137,7 +141,9 @@ static int remove_board(struct slot *p_slot) int retval; struct controller *ctrl = p_slot->ctrl; + pm_runtime_get_sync(&ctrl->pcie->port->dev); retval = pciehp_unconfigure_device(p_slot); + pm_runtime_put(&ctrl->pcie->port->dev); if (retval) return retval; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d86351a2fe6e..1eb622cc8645 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2245,13 +2245,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) return false; /* - * Hotplug interrupts cannot be delivered if the link is down, - * so parents of a hotplug port must stay awake. In addition, - * hotplug ports handled by firmware in System Management Mode + * Hotplug ports handled by firmware in System Management Mode * may not be put into D3 by the OS (Thunderbolt on non-Macs). - * For simplicity, disallow in general for now. */ - if (bridge->is_hotplug_bridge) + if (bridge->is_hotplug_bridge && !pciehp_is_native(bridge)) return false; if (pci_bridge_d3_force) @@ -2283,7 +2280,10 @@ static int pci_dev_check_d3cold(struct pci_dev *dev, void *data) !pci_pme_capable(dev, PCI_D3cold)) || /* If it is a bridge it must be allowed to go to D3. */ - !pci_power_manageable(dev)) + !pci_power_manageable(dev) || + + /* Hotplug interrupts cannot be delivered if the link is down. */ + dev->is_hotplug_bridge) *d3cold_ok = false; -- 2.20.1