From 68a81291ff6650f3ff409ebfc58ef97dfe85a2e4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 16 Nov 2012 09:28:49 -0500 Subject: [PATCH] staging: Add SystemBase Multi-2/PCI driver I ported the driver supplied by SystemBase to mainline. As the driver had MODULE_LICENSE("GPL") it is declared as a GPL module and thus I have the right to distribute it upstream. Note, I did the bare minimum to get it working. It still needs a lot of loving. Cc: hjchoi Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/sb105x/Kconfig | 9 + drivers/staging/sb105x/Makefile | 3 + drivers/staging/sb105x/sb_mp_register.h | 295 +++ drivers/staging/sb105x/sb_pci_mp.c | 3195 +++++++++++++++++++++++ drivers/staging/sb105x/sb_pci_mp.h | 293 +++ drivers/staging/sb105x/sb_ser_core.h | 368 +++ 8 files changed, 4166 insertions(+) create mode 100644 drivers/staging/sb105x/Kconfig create mode 100644 drivers/staging/sb105x/Makefile create mode 100644 drivers/staging/sb105x/sb_mp_register.h create mode 100644 drivers/staging/sb105x/sb_pci_mp.c create mode 100644 drivers/staging/sb105x/sb_pci_mp.h create mode 100644 drivers/staging/sb105x/sb_ser_core.h diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index d805eef11915..f245fd3153d0 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -144,4 +144,6 @@ source "drivers/staging/imx-drm/Kconfig" source "drivers/staging/dgrp/Kconfig" +source "drivers/staging/sb105x/Kconfig" + endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 76e2ebd596ff..94cc3fa5ef81 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -64,3 +64,4 @@ obj-$(CONFIG_NET_VENDOR_SILICOM) += silicom/ obj-$(CONFIG_CED1401) += ced1401/ obj-$(CONFIG_DRM_IMX) += imx-drm/ obj-$(CONFIG_DGRP) += dgrp/ +obj-$(CONFIG_SB105X) += sb105x/ diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig new file mode 100644 index 000000000000..ac87c5e38dee --- /dev/null +++ b/drivers/staging/sb105x/Kconfig @@ -0,0 +1,9 @@ +config SB105X + tristate "SystemBase PCI Multiport UART" + select SERIAL_CORE + depends on PCI + help + A driver for the SystemBase Multi-2/PCI serial card + + To compile this driver a module, choose M here: the module + will be called "sb105x". diff --git a/drivers/staging/sb105x/Makefile b/drivers/staging/sb105x/Makefile new file mode 100644 index 000000000000..b1bf3779acae --- /dev/null +++ b/drivers/staging/sb105x/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_SB105X) += sb105x.o + +sb105x-y := sb_pci_mp.o diff --git a/drivers/staging/sb105x/sb_mp_register.h b/drivers/staging/sb105x/sb_mp_register.h new file mode 100644 index 000000000000..5480ae11368f --- /dev/null +++ b/drivers/staging/sb105x/sb_mp_register.h @@ -0,0 +1,295 @@ + +/* + * SB105X_UART.h + * + * Copyright (C) 2008 systembase + * + * UART registers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef UART_SB105X_H +#define UART_SB105X_H + +/* + * option register + */ + +/* Device Infomation Register */ +#define MP_OPTR_DIR0 0x04 /* port0 ~ port8 */ +#define MP_OPTR_DIR1 0x05 /* port8 ~ port15 */ +#define MP_OPTR_DIR2 0x06 /* port16 ~ port23 */ +#define MP_OPTR_DIR3 0x07 /* port24 ~ port31 */ + +#define DIR_UART_16C550 0 +#define DIR_UART_16C1050 1 +#define DIR_UART_16C1050A 2 + +#define DIR_CLK_1843200 0x0 /* input clock 1843200 Hz */ +#define DIR_CLK_3686400 0x1 /* input clock 3686400 Hz */ +#define DIR_CLK_7372800 0x2 /* input clock 7372800 Hz */ +#define DIR_CLK_14745600 0x3 /* input clock 14745600 Hz */ +#define DIR_CLK_29491200 0x4 /* input clock 29491200 Hz */ +#define DIR_CLK_58985400 0x5 /* input clock 58985400 Hz */ + +/* Interface Information Register */ +#define MP_OPTR_IIR0 0x08 /* port0 ~ port8 */ +#define MP_OPTR_IIR1 0x09 /* port8 ~ port15 */ +#define MP_OPTR_IIR2 0x0A /* port16 ~ port23 */ +#define MP_OPTR_IIR3 0x0B /* port24 ~ port31 */ + +#define IIR_RS232 0x00 /* RS232 type */ +#define IIR_RS422 0x10 /* RS422 type */ +#define IIR_RS485 0x20 /* RS485 type */ +#define IIR_UNKNOWN 0x30 /* unknown type */ + +/* Interrrupt Mask Register */ +#define MP_OPTR_IMR0 0x0C /* port0 ~ port8 */ +#define MP_OPTR_IMR1 0x0D /* port8 ~ port15 */ +#define MP_OPTR_IMR2 0x0E /* port16 ~ port23 */ +#define MP_OPTR_IMR3 0x0F /* port24 ~ port31 */ + +/* Interrupt Poll Register */ +#define MP_OPTR_IPR0 0x10 /* port0 ~ port8 */ +#define MP_OPTR_IPR1 0x11 /* port8 ~ port15 */ +#define MP_OPTR_IPR2 0x12 /* port16 ~ port23 */ +#define MP_OPTR_IPR3 0x13 /* port24 ~ port31 */ + +/* General Purpose Output Control Register */ +#define MP_OPTR_GPOCR 0x20 + +/* General Purpose Output Data Register */ +#define MP_OPTR_GPODR 0x21 + +/* Parallel Additional Function Register */ +#define MP_OPTR_PAFR 0x23 + +/* + * systembase 16c105x UART register + */ + +#define PAGE_0 0 +#define PAGE_1 1 +#define PAGE_2 2 +#define PAGE_3 3 +#define PAGE_4 4 + +/* + * ****************************************************************** + * * DLAB=0 =============== Page 0 Registers * + * ****************************************************************** + */ + +#define SB105X_RX 0 /* In: Receive buffer */ +#define SB105X_TX 0 /* Out: Transmit buffer */ + +#define SB105X_IER 1 /* Out: Interrupt Enable Register */ + +#define SB105X_IER_CTSI 0x80 /* CTS# Interrupt Enable (Requires EFR[4] = 1) */ +#define SB105X_IER_RTSI 0x40 /* RTS# Interrupt Enable (Requires EFR[4] = 1) */ +#define SB105X_IER_XOI 0x20 /* Xoff Interrupt Enable (Requires EFR[4] = 1) */ +#define SB105X_IER_SME 0x10 /* Sleep Mode Enable (Requires EFR[4] = 1) */ +#define SB105X_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define SB105X_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define SB105X_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define SB105X_IER_RDI 0x01 /* Enable receiver data interrupt */ + +#define SB105X_ISR 2 /* In: Interrupt ID Register */ + +#define SB105X_ISR_NOINT 0x01 /* No interrupts pending */ +#define SB105X_ISR_RLSI 0x06 /* Receiver line status interrupt (Priority = 1)*/ +#define SB105X_ISR_RDAI 0x0c /* Receive Data Available interrupt */ +#define SB105X_ISR_CTII 0x04 /* Character Timeout Indication interrupt */ +#define SB105X_ISR_THRI 0x02 /* Transmitter holding register empty */ +#define SB105X_ISR_MSI 0x00 /* Modem status interrupt */ +#define SB105X_ISR_RXCI 0x10 /* Receive Xoff or Special Character interrupt */ +#define SB105X_ISR_RCSI 0x20 /* RTS#, CTS# status interrupt during Auto RTS/CTS flow control */ + +#define SB105X_FCR 2 /* Out: FIFO Control Register */ + +#define SB105X_FCR_FEN 0x01 /* FIFO Enable */ +#define SB105X_FCR_RXFR 0x02 /* RX FIFO Reset */ +#define SB105X_FCR_TXFR 0x04 /* TX FIFO Reset */ +#define SB105X_FCR_DMS 0x08 /* DMA Mode Select */ + +#define SB105X_FCR_RTR08 0x00 /* Receice Trigger Level set at 8 */ +#define SB105X_FCR_RTR16 0x40 /* Receice Trigger Level set at 16 */ +#define SB105X_FCR_RTR56 0x80 /* Receice Trigger Level set at 56 */ +#define SB105X_FCR_RTR60 0xc0 /* Receice Trigger Level set at 60 */ +#define SB105X_FCR_TTR08 0x00 /* Transmit Trigger Level set at 8 */ +#define SB105X_FCR_TTR16 0x10 /* Transmit Trigger Level set at 16 */ +#define SB105X_FCR_TTR32 0x20 /* Transmit Trigger Level set at 32 */ +#define SB105X_FCR_TTR56 0x30 /* Transmit Trigger Level set at 56 */ + +#define SB105X_LCR 3 /* Out: Line Control Register */ +/* + * * Note: if the word length is 5 bits (SB105X_LCR_WLEN5), then setting + * * SB105X_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define SB105X_LCR_DLAB 0x80 /* Divisor Latch Enable */ +#define SB105X_LCR_SBC 0x40 /* Break Enable*/ +#define SB105X_LCR_SPAR 0x20 /* Set Stick parity */ +#define SB105X_LCR_EPAR 0x10 /* Even parity select */ +#define SB105X_LCR_PAREN 0x08 /* Parity Enable */ +#define SB105X_LCR_STOP 0x04 /* Stop bits: 0->1 bit, 1->2 bits, 1 and SB105X_LCR_WLEN5 -> 1.5 bit */ +#define SB105X_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define SB105X_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define SB105X_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define SB105X_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +#define SB105X_LCR_BF 0xBF + +#define SB105X_MCR 4 /* Out: Modem Control Register */ +#define SB105X_MCR_CPS 0x80 /* Clock Prescaler Select */ +#define SB105X_MCR_P2S 0x40 /* Page 2 Select /Xoff Re-Transmit Access Enable */ +#define SB105X_MCR_XOA 0x20 /* Xon Any Enable */ +#define SB105X_MCR_ILB 0x10 /* Internal Loopback Enable */ +#define SB105X_MCR_OUT2 0x08 /* Out2/Interrupt Output Enable*/ +#define SB105X_MCR_OUT1 0x04 /* Out1/Interrupt Output Enable */ +#define SB105X_MCR_RTS 0x02 /* RTS# Output */ +#define SB105X_MCR_DTR 0x01 /* DTR# Output */ + +#define SB105X_LSR 5 /* In: Line Status Register */ +#define SB105X_LSR_RFEI 0x80 /* Receive FIFO data error Indicator */ +#define SB105X_LSR_TEMI 0x40 /* THR and TSR Empty Indicator */ +#define SB105X_LSR_THRE 0x20 /* THR Empty Indicator */ +#define SB105X_LSR_BII 0x10 /* Break interrupt indicator */ +#define SB105X_LSR_FEI 0x08 /* Frame error indicator */ +#define SB105X_LSR_PEI 0x04 /* Parity error indicator */ +#define SB105X_LSR_OEI 0x02 /* Overrun error indicator */ +#define SB105X_LSR_RDRI 0x01 /* Receive data ready Indicator*/ + +#define SB105X_MSR 6 /* In: Modem Status Register */ +#define SB105X_MSR_DCD 0x80 /* Data Carrier Detect */ +#define SB105X_MSR_RI 0x40 /* Ring Indicator */ +#define SB105X_MSR_DSR 0x20 /* Data Set Ready */ +#define SB105X_MSR_CTS 0x10 /* Clear to Send */ +#define SB105X_MSR_DDCD 0x08 /* Delta DCD */ +#define SB105X_MSR_DRI 0x04 /* Delta ring indicator */ +#define SB105X_MSR_DDSR 0x02 /* Delta DSR */ +#define SB105X_MSR_DCTS 0x01 /* Delta CTS */ + +#define SB105XA_MDR 6 /* Out: Multi Drop mode Register */ +#define SB105XA_MDR_NPS 0x08 /* 9th Bit Polarity Select */ +#define SB105XA_MDR_AME 0x02 /* Auto Multi-drop Enable */ +#define SB105XA_MDR_MDE 0x01 /* Multi Drop Enable */ + +#define SB105X_SPR 7 /* I/O: Scratch Register */ + +/* + * DLAB=1 + */ +#define SB105X_DLL 0 /* Out: Divisor Latch Low */ +#define SB105X_DLM 1 /* Out: Divisor Latch High */ + +/* + * ****************************************************************** + * * DLAB(LCR[7]) = 0 , MCR[6] = 1 ============= Page 2 Registers * + * ****************************************************************** + */ +#define SB105X_GICR 1 /* Global Interrupt Control Register */ +#define SB105X_GICR_GIM 0x01 /* Global Interrupt Mask */ + +#define SB105X_GISR 2 /* Global Interrupt Status Register */ +#define SB105X_GISR_MGICR0 0x80 /* Mirror the content of GICR[0] */ +#define SB105X_GISR_CS3IS 0x08 /* SB105X of CS3# Interrupt Status */ +#define SB105X_GISR_CS2IS 0x04 /* SB105X of CS2# Interrupt Status */ +#define SB105X_GISR_CS1IS 0x02 /* SB105X of CS1# Interrupt Status */ +#define SB105X_GISR_CS0IS 0x01 /* SB105X of CS0# Interrupt Status */ + +#define SB105X_TFCR 5 /* Transmit FIFO Count Register */ + +#define SB105X_RFCR 6 /* Receive FIFO Count Register */ + +#define SB105X_FSR 7 /* Flow Control Status Register */ +#define SB105X_FSR_THFS 0x20 /* Transmit Hardware Flow Control Status */ +#define SB105X_FSR_TSFS 0x10 /* Transmit Software Flow Control Status */ +#define SB105X_FSR_RHFS 0x02 /* Receive Hardware Flow Control Status */ +#define SB105X_FSR_RSFS 0x01 /* Receive Software Flow Control Status */ + +/* + * ****************************************************************** + * * LCR = 0xBF, PSR[0] = 0 ============= Page 3 Registers * + * ****************************************************************** + */ + +#define SB105X_PSR 0 /* Page Select Register */ +#define SB105X_PSR_P3KEY 0xA4 /* Page 3 Select Key */ +#define SB105X_PSR_P4KEY 0xA5 /* Page 5 Select Key */ + +#define SB105X_ATR 1 /* Auto Toggle Control Register */ +#define SB105X_ATR_RPS 0x80 /* RXEN Polarity Select */ +#define SB105X_ATR_RCMS 0x40 /* RXEN Control Mode Select */ +#define SB105X_ATR_TPS 0x20 /* TXEN Polarity Select */ +#define SB105X_ATR_TCMS 0x10 /* TXEN Control Mode Select */ +#define SB105X_ATR_ATDIS 0x00 /* Auto Toggle is disabled */ +#define SB105X_ATR_ART 0x01 /* RTS#/TXEN pin operates as TXEN */ +#define SB105X_ATR_ADT 0x02 /* DTR#/TXEN pin operates as TXEN */ +#define SB105X_ATR_A80 0x03 /* only in 80 pin use */ + +#define SB105X_EFR 2 /* (Auto) Enhanced Feature Register */ +#define SB105X_EFR_ACTS 0x80 /* Auto-CTS Flow Control Enable */ +#define SB105X_EFR_ARTS 0x40 /* Auto-RTS Flow Control Enable */ +#define SB105X_EFR_SCD 0x20 /* Special Character Detect */ +#define SB105X_EFR_EFBEN 0x10 /* Enhanced Function Bits Enable */ + +#define SB105X_XON1 4 /* Xon1 Character Register */ +#define SB105X_XON2 5 /* Xon2 Character Register */ +#define SB105X_XOFF1 6 /* Xoff1 Character Register */ +#define SB105X_XOFF2 7 /* Xoff2 Character Register */ + +/* + * ****************************************************************** + * * LCR = 0xBF, PSR[0] = 1 ============ Page 4 Registers * + * ****************************************************************** + */ + +#define SB105X_AFR 1 /* Additional Feature Register */ +#define SB105X_AFR_GIPS 0x20 /* Global Interrupt Polarity Select */ +#define SB105X_AFR_GIEN 0x10 /* Global Interrupt Enable */ +#define SB105X_AFR_AFEN 0x01 /* 256-byte FIFO Enable */ + +#define SB105X_XRCR 2 /* Xoff Re-transmit Count Register */ +#define SB105X_XRCR_NRC1 0x00 /* Transmits Xoff Character whenever the number of received data is 1 during XOFF status */ +#define SB105X_XRCR_NRC4 0x01 /* Transmits Xoff Character whenever the number of received data is 4 during XOFF status */ +#define SB105X_XRCR_NRC8 0x02 /* Transmits Xoff Character whenever the number of received data is 8 during XOFF status */ +#define SB105X_XRCR_NRC16 0x03 /* Transmits Xoff Character whenever the number of received data is 16 during XOFF status */ + +#define SB105X_TTR 4 /* Transmit FIFO Trigger Level Register */ +#define SB105X_RTR 5 /* Receive FIFO Trigger Level Register */ +#define SB105X_FUR 6 /* Flow Control Upper Threshold Register */ +#define SB105X_FLR 7 /* Flow Control Lower Threshold Register */ + + +/* page 0 */ + +#define SB105X_GET_CHAR(port) inb((port)->iobase + SB105X_RX) +#define SB105X_GET_IER(port) inb((port)->iobase + SB105X_IER) +#define SB105X_GET_ISR(port) inb((port)->iobase + SB105X_ISR) +#define SB105X_GET_LCR(port) inb((port)->iobase + SB105X_LCR) +#define SB105X_GET_MCR(port) inb((port)->iobase + SB105X_MCR) +#define SB105X_GET_LSR(port) inb((port)->iobase + SB105X_LSR) +#define SB105X_GET_MSR(port) inb((port)->iobase + SB105X_MSR) +#define SB105X_GET_SPR(port) inb((port)->iobase + SB105X_SPR) + +#define SB105X_PUT_CHAR(port,v) outb((v),(port)->iobase + SB105X_TX ) +#define SB105X_PUT_IER(port,v) outb((v),(port)->iobase + SB105X_IER ) +#define SB105X_PUT_FCR(port,v) outb((v),(port)->iobase + SB105X_FCR ) +#define SB105X_PUT_LCR(port,v) outb((v),(port)->iobase + SB105X_LCR ) +#define SB105X_PUT_MCR(port,v) outb((v),(port)->iobase + SB105X_MCR ) +#define SB105X_PUT_SPR(port,v) outb((v),(port)->iobase + SB105X_SPR ) + + +/* page 1 */ +#define SB105X_GET_REG(port,reg) inb((port)->iobase + (reg)) +#define SB105X_PUT_REG(port,reg,v) outb((v),(port)->iobase + (reg)) + +/* page 2 */ + +#define SB105X_PUT_PSR(port,v) outb((v),(port)->iobase + SB105X_PSR ) + +#endif diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c new file mode 100644 index 000000000000..fbebf88226d3 --- /dev/null +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -0,0 +1,3195 @@ +#include "sb_pci_mp.h" +#include +#include + +extern struct parport *parport_pc_probe_port(unsigned long base_lo, + unsigned long base_hi, + int irq, int dma, + struct device *dev, + int irqflags); + +static struct mp_device_t mp_devs[MAX_MP_DEV]; +static int mp_nrpcibrds = sizeof(mp_pciboards)/sizeof(mppcibrd_t); +static int NR_BOARD=0; +static int NR_PORTS=0; +static struct mp_port multi_ports[MAX_MP_PORT]; +static struct irq_info irq_lists[NR_IRQS]; + +static _INLINE_ unsigned int serial_in(struct mp_port *mtpt, int offset); +static _INLINE_ void serial_out(struct mp_port *mtpt, int offset, int value); +static _INLINE_ unsigned int read_option_register(struct mp_port *mtpt, int offset); +static int sb1054_get_register(struct sb_uart_port * port, int page, int reg); +static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, int value); +static void SendATCommand(struct mp_port * mtpt); +static int set_deep_fifo(struct sb_uart_port * port, int status); +static int get_deep_fifo(struct sb_uart_port * port); +static int get_device_type(int arg); +static int set_auto_rts(struct sb_uart_port *port, int status); +static void mp_stop(struct tty_struct *tty); +static void __mp_start(struct tty_struct *tty); +static void mp_start(struct tty_struct *tty); +static void mp_tasklet_action(unsigned long data); +static inline void mp_update_mctrl(struct sb_uart_port *port, unsigned int set, unsigned int clear); +static int mp_startup(struct sb_uart_state *state, int init_hw); +static void mp_shutdown(struct sb_uart_state *state); +static void mp_change_speed(struct sb_uart_state *state, struct MP_TERMIOS *old_termios); + +static inline int __mp_put_char(struct sb_uart_port *port, struct circ_buf *circ, unsigned char c); +static int mp_put_char(struct tty_struct *tty, unsigned char ch); + +static void mp_put_chars(struct tty_struct *tty); +static int mp_write(struct tty_struct *tty, const unsigned char * buf, int count); +static int mp_write_room(struct tty_struct *tty); +static int mp_chars_in_buffer(struct tty_struct *tty); +static void mp_flush_buffer(struct tty_struct *tty); +static void mp_send_xchar(struct tty_struct *tty, char ch); +static void mp_throttle(struct tty_struct *tty); +static void mp_unthrottle(struct tty_struct *tty); +static int mp_get_info(struct sb_uart_state *state, struct serial_struct *retinfo); +static int mp_set_info(struct sb_uart_state *state, struct serial_struct *newinfo); +static int mp_get_lsr_info(struct sb_uart_state *state, unsigned int *value); + +static int mp_tiocmget(struct tty_struct *tty); +static int mp_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int mp_break_ctl(struct tty_struct *tty, int break_state); +static int mp_do_autoconfig(struct sb_uart_state *state); +static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg); +static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt); +static int mp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); +static void mp_set_termios(struct tty_struct *tty, struct MP_TERMIOS *old_termios); +static void mp_close(struct tty_struct *tty, struct file *filp); +static void mp_wait_until_sent(struct tty_struct *tty, int timeout); +static void mp_hangup(struct tty_struct *tty); +static void mp_update_termios(struct sb_uart_state *state); +static int mp_block_til_ready(struct file *filp, struct sb_uart_state *state); +static struct sb_uart_state *uart_get(struct uart_driver *drv, int line); +static int mp_open(struct tty_struct *tty, struct file *filp); +static const char *mp_type(struct sb_uart_port *port); +static void mp_change_pm(struct sb_uart_state *state, int pm_state); +static inline void mp_report_port(struct uart_driver *drv, struct sb_uart_port *port); +static void mp_configure_port(struct uart_driver *drv, struct sb_uart_state *state, struct sb_uart_port *port); +static void mp_unconfigure_port(struct uart_driver *drv, struct sb_uart_state *state); +static int mp_register_driver(struct uart_driver *drv); +static void mp_unregister_driver(struct uart_driver *drv); +static int mp_add_one_port(struct uart_driver *drv, struct sb_uart_port *port); +static int mp_remove_one_port(struct uart_driver *drv, struct sb_uart_port *port); +static void autoconfig(struct mp_port *mtpt, unsigned int probeflags); +static void autoconfig_irq(struct mp_port *mtpt); +static void multi_stop_tx(struct sb_uart_port *port); +static void multi_start_tx(struct sb_uart_port *port); +static void multi_stop_rx(struct sb_uart_port *port); +static void multi_enable_ms(struct sb_uart_port *port); +static _INLINE_ void receive_chars(struct mp_port *mtpt, int *status ); +static _INLINE_ void transmit_chars(struct mp_port *mtpt); +static _INLINE_ void check_modem_status(struct mp_port *mtpt); +static inline void multi_handle_port(struct mp_port *mtpt); +static irqreturn_t multi_interrupt(int irq, void *dev_id); +static void serial_do_unlink(struct irq_info *i, struct mp_port *mtpt); +static int serial_link_irq_chain(struct mp_port *mtpt); +static void serial_unlink_irq_chain(struct mp_port *mtpt); +static void multi_timeout(unsigned long data); +static unsigned int multi_tx_empty(struct sb_uart_port *port); +static unsigned int multi_get_mctrl(struct sb_uart_port *port); +static void multi_set_mctrl(struct sb_uart_port *port, unsigned int mctrl); +static void multi_break_ctl(struct sb_uart_port *port, int break_state); +static int multi_startup(struct sb_uart_port *port); +static void multi_shutdown(struct sb_uart_port *port); +static unsigned int multi_get_divisor(struct sb_uart_port *port, unsigned int baud); +static void multi_set_termios(struct sb_uart_port *port, struct MP_TERMIOS *termios, struct MP_TERMIOS *old); +static void multi_pm(struct sb_uart_port *port, unsigned int state, unsigned int oldstate); +static void multi_release_std_resource(struct mp_port *mtpt); +static void multi_release_port(struct sb_uart_port *port); +static int multi_request_port(struct sb_uart_port *port); +static void multi_config_port(struct sb_uart_port *port, int flags); +static int multi_verify_port(struct sb_uart_port *port, struct serial_struct *ser); +static const char * multi_type(struct sb_uart_port *port); +static void __init multi_init_ports(void); +static void __init multi_register_ports(struct uart_driver *drv); +static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd); + +static int deep[256]; +static int deep_count; +static int fcr_arr[256]; +static int fcr_count; +static int ttr[256]; +static int ttr_count; +static int rtr[256]; +static int rtr_count; + +module_param_array(deep,int,&deep_count,0); +module_param_array(fcr_arr,int,&fcr_count,0); +module_param_array(ttr,int,&ttr_count,0); +module_param_array(rtr,int,&rtr_count,0); + +static _INLINE_ unsigned int serial_in(struct mp_port *mtpt, int offset) +{ + return inb(mtpt->port.iobase + offset); +} + +static _INLINE_ void serial_out(struct mp_port *mtpt, int offset, int value) +{ + outb(value, mtpt->port.iobase + offset); +} + +static _INLINE_ unsigned int read_option_register(struct mp_port *mtpt, int offset) +{ + return inb(mtpt->option_base_addr + offset); +} + +static int sb1053a_get_interface(struct mp_port *mtpt, int port_num) +{ + unsigned long option_base_addr = mtpt->option_base_addr; + unsigned int interface = 0; + + switch (port_num) + { + case 0: + case 1: + /* set GPO[1:0] = 00 */ + outb(0x00, option_base_addr + MP_OPTR_GPODR); + break; + case 2: + case 3: + /* set GPO[1:0] = 01 */ + outb(0x01, option_base_addr + MP_OPTR_GPODR); + break; + case 4: + case 5: + /* set GPO[1:0] = 10 */ + outb(0x02, option_base_addr + MP_OPTR_GPODR); + break; + default: + break; + } + + port_num &= 0x1; + + /* get interface */ + interface = inb(option_base_addr + MP_OPTR_IIR0 + port_num); + + /* set GPO[1:0] = 11 */ + outb(0x03, option_base_addr + MP_OPTR_GPODR); + + return (interface); +} + +static int sb1054_get_register(struct sb_uart_port * port, int page, int reg) +{ + int ret = 0; + unsigned int lcr = 0; + unsigned int mcr = 0; + unsigned int tmp = 0; + + if( page <= 0) + { + printk(" page 0 can not use this fuction\n"); + return -1; + } + + switch(page) + { + case 1: + lcr = SB105X_GET_LCR(port); + tmp = lcr | SB105X_LCR_DLAB; + SB105X_PUT_LCR(port, tmp); + + tmp = SB105X_GET_LCR(port); + + ret = SB105X_GET_REG(port,reg); + SB105X_PUT_LCR(port,lcr); + break; + case 2: + mcr = SB105X_GET_MCR(port); + tmp = mcr | SB105X_MCR_P2S; + SB105X_PUT_MCR(port,tmp); + + ret = SB105X_GET_REG(port,reg); + + SB105X_PUT_MCR(port,mcr); + break; + case 3: + lcr = SB105X_GET_LCR(port); + tmp = lcr | SB105X_LCR_BF; + SB105X_PUT_LCR(port,tmp); + SB105X_PUT_REG(port,SB105X_PSR,SB105X_PSR_P3KEY); + + ret = SB105X_GET_REG(port,reg); + + SB105X_PUT_LCR(port,lcr); + break; + case 4: + lcr = SB105X_GET_LCR(port); + tmp = lcr | SB105X_LCR_BF; + SB105X_PUT_LCR(port,tmp); + SB105X_PUT_REG(port,SB105X_PSR,SB105X_PSR_P4KEY); + + ret = SB105X_GET_REG(port,reg); + + SB105X_PUT_LCR(port,lcr); + break; + default: + printk(" error invalid page number \n"); + return -1; + } + + return ret; +} + +static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, int value) +{ + int lcr = 0; + int mcr = 0; + int ret = 0; + + if( page <= 0) + { + printk(" page 0 can not use this fuction\n"); + return -1; + } + switch(page) + { + case 1: + lcr = SB105X_GET_LCR(port); + SB105X_PUT_LCR(port, lcr | SB105X_LCR_DLAB); + + SB105X_PUT_REG(port,reg,value); + + SB105X_PUT_LCR(port, lcr); + ret = 1; + break; + case 2: + mcr = SB105X_GET_MCR(port); + SB105X_PUT_MCR(port, mcr | SB105X_MCR_P2S); + + SB105X_PUT_REG(port,reg,value); + + SB105X_PUT_MCR(port, mcr); + ret = 1; + break; + case 3: + lcr = SB105X_GET_LCR(port); + SB105X_PUT_LCR(port, lcr | SB105X_LCR_BF); + SB105X_PUT_PSR(port, SB105X_PSR_P3KEY); + + SB105X_PUT_REG(port,reg,value); + + SB105X_PUT_LCR(port, lcr); + ret = 1; + break; + case 4: + lcr = SB105X_GET_LCR(port); + SB105X_PUT_LCR(port, lcr | SB105X_LCR_BF); + SB105X_PUT_PSR(port, SB105X_PSR_P4KEY); + + SB105X_PUT_REG(port,reg,value); + + SB105X_PUT_LCR(port, lcr); + ret = 1; + break; + default: + printk(" error invalid page number \n"); + return -1; + } + + return ret; +} + +static int set_multidrop_mode(struct sb_uart_port *port, unsigned int mode) +{ + int mdr = SB105XA_MDR_NPS; + + if (mode & MDMODE_ENABLE) + { + mdr |= SB105XA_MDR_MDE; + } + + if (1) //(mode & MDMODE_AUTO) + { + int efr = 0; + mdr |= SB105XA_MDR_AME; + efr = sb1054_get_register(port, PAGE_3, SB105X_EFR); + efr |= SB105X_EFR_SCD; + sb1054_set_register(port, PAGE_3, SB105X_EFR, efr); + } + + sb1054_set_register(port, PAGE_1, SB105XA_MDR, mdr); + port->mdmode &= ~0x6; + port->mdmode |= mode; + printk("[%d] multidrop init: %x\n", port->line, port->mdmode); + + return 0; +} + +static int get_multidrop_addr(struct sb_uart_port *port) +{ + return sb1054_get_register(port, PAGE_3, SB105X_XOFF2); +} + +static int set_multidrop_addr(struct sb_uart_port *port, unsigned int addr) +{ + sb1054_set_register(port, PAGE_3, SB105X_XOFF2, addr); + + return 0; +} + +static void SendATCommand(struct mp_port * mtpt) +{ + // a t cr lf + unsigned char ch[] = {0x61,0x74,0x0d,0x0a,0x0}; + unsigned char lineControl; + unsigned char i=0; + unsigned char Divisor = 0xc; + + lineControl = serial_inp(mtpt,UART_LCR); + serial_outp(mtpt,UART_LCR,(lineControl | UART_LCR_DLAB)); + serial_outp(mtpt,UART_DLL,(Divisor & 0xff)); + serial_outp(mtpt,UART_DLM,(Divisor & 0xff00)>>8); //baudrate is 4800 + + + serial_outp(mtpt,UART_LCR,lineControl); + serial_outp(mtpt,UART_LCR,0x03); // N-8-1 + serial_outp(mtpt,UART_FCR,7); + serial_outp(mtpt,UART_MCR,0x3); + while(ch[i]){ + while((serial_inp(mtpt,UART_LSR) & 0x60) !=0x60){ + ; + } + serial_outp(mtpt,0,ch[i++]); + } + + +}// end of SendATCommand() + +static int set_deep_fifo(struct sb_uart_port * port, int status) +{ + int afr_status = 0; + afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR); + + if(status == ENABLE) + { + afr_status |= SB105X_AFR_AFEN; + } + else + { + afr_status &= ~SB105X_AFR_AFEN; + } + + sb1054_set_register(port,PAGE_4,SB105X_AFR,afr_status); + sb1054_set_register(port,PAGE_4,SB105X_TTR,ttr[port->line]); + sb1054_set_register(port,PAGE_4,SB105X_RTR,rtr[port->line]); + afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR); + + return afr_status; +} + +static int get_device_type(int arg) +{ + int ret; + ret = inb(mp_devs[arg].option_reg_addr+MP_OPTR_DIR0); + ret = (ret & 0xf0) >> 4; + switch (ret) + { + case DIR_UART_16C550: + return PORT_16C55X; + case DIR_UART_16C1050: + return PORT_16C105X; + case DIR_UART_16C1050A: + /* + if (mtpt->port.line < 2) + { + return PORT_16C105XA; + } + else + { + if (mtpt->device->device_id & 0x50) + { + return PORT_16C55X; + } + else + { + return PORT_16C105X; + } + }*/ + return PORT_16C105XA; + default: + return PORT_UNKNOWN; + } + +} +static int get_deep_fifo(struct sb_uart_port * port) +{ + int afr_status = 0; + afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR); + return afr_status; +} + +static int set_auto_rts(struct sb_uart_port *port, int status) +{ + int atr_status = 0; + +#if 0 + int efr_status = 0; + + efr_status = sb1054_get_register(port, PAGE_3, SB105X_EFR); + if(status == ENABLE) + efr_status |= SB105X_EFR_ARTS; + else + efr_status &= ~SB105X_EFR_ARTS; + sb1054_set_register(port,PAGE_3,SB105X_EFR,efr_status); + efr_status = sb1054_get_register(port, PAGE_3, SB105X_EFR); +#endif + +//ATR + atr_status = sb1054_get_register(port, PAGE_3, SB105X_ATR); + switch(status) + { + case RS422PTP: + atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_A80); + break; + case RS422MD: + atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80); + break; + case RS485NE: + atr_status = (SB105X_ATR_RCMS) | (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80); + break; + case RS485ECHO: + atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80); + break; + } + + sb1054_set_register(port,PAGE_3,SB105X_ATR,atr_status); + atr_status = sb1054_get_register(port, PAGE_3, SB105X_ATR); + + return atr_status; +} + +static void mp_stop(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->ops->stop_tx(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __mp_start(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + + if (!uart_circ_empty(&state->info->xmit) && state->info->xmit.buf && + !tty->stopped && !tty->hw_stopped) + port->ops->start_tx(port); +} + +static void mp_start(struct tty_struct *tty) +{ + __mp_start(tty); +} + +static void mp_tasklet_action(unsigned long data) +{ + struct sb_uart_state *state = (struct sb_uart_state *)data; + struct tty_struct *tty; + + printk("tasklet is called!\n"); + tty = state->info->tty; + tty_wakeup(tty); +} + +static inline void mp_update_mctrl(struct sb_uart_port *port, unsigned int set, unsigned int clear) +{ + unsigned int old; + + old = port->mctrl; + port->mctrl = (old & ~clear) | set; + if (old != port->mctrl) + port->ops->set_mctrl(port, port->mctrl); +} + +#define uart_set_mctrl(port,set) mp_update_mctrl(port,set,0) +#define uart_clear_mctrl(port,clear) mp_update_mctrl(port,0,clear) + +static int mp_startup(struct sb_uart_state *state, int init_hw) +{ + struct sb_uart_info *info = state->info; + struct sb_uart_port *port = state->port; + unsigned long page; + int retval = 0; + + if (info->flags & UIF_INITIALIZED) + return 0; + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + if (port->type == PORT_UNKNOWN) + return 0; + + if (!info->xmit.buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + info->xmit.buf = (unsigned char *) page; + + uart_circ_clear(&info->xmit); + } + + retval = port->ops->startup(port); + if (retval == 0) { + if (init_hw) { + mp_change_speed(state, NULL); + + if (info->tty->termios.c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); + } + + info->flags |= UIF_INITIALIZED; + + + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + + if (retval && capable(CAP_SYS_ADMIN)) + retval = 0; + + return retval; +} + +static void mp_shutdown(struct sb_uart_state *state) +{ + struct sb_uart_info *info = state->info; + struct sb_uart_port *port = state->port; + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + if (info->flags & UIF_INITIALIZED) { + info->flags &= ~UIF_INITIALIZED; + + if (!info->tty || (info->tty->termios.c_cflag & HUPCL)) + uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + + wake_up_interruptible(&info->delta_msr_wait); + + port->ops->shutdown(port); + + synchronize_irq(port->irq); + } + tasklet_kill(&info->tlet); + + if (info->xmit.buf) { + free_page((unsigned long)info->xmit.buf); + info->xmit.buf = NULL; + } +} + +static void mp_change_speed(struct sb_uart_state *state, struct MP_TERMIOS *old_termios) +{ + struct tty_struct *tty = state->info->tty; + struct sb_uart_port *port = state->port; + + if (!tty || port->type == PORT_UNKNOWN) + return; + + if (tty->termios.c_cflag & CRTSCTS) + state->info->flags |= UIF_CTS_FLOW; + else + state->info->flags &= ~UIF_CTS_FLOW; + + if (tty->termios.c_cflag & CLOCAL) + state->info->flags &= ~UIF_CHECK_CD; + else + state->info->flags |= UIF_CHECK_CD; + + port->ops->set_termios(port, &tty->termios, old_termios); +} + +static inline int __mp_put_char(struct sb_uart_port *port, struct circ_buf *circ, unsigned char c) +{ + unsigned long flags; + int ret = 0; + + if (!circ->buf) + return 0; + + spin_lock_irqsave(&port->lock, flags); + if (uart_circ_chars_free(circ) != 0) { + circ->buf[circ->head] = c; + circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); + ret = 1; + } + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static int mp_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct sb_uart_state *state = tty->driver_data; + + return __mp_put_char(state->port, &state->info->xmit, ch); +} + +static void mp_put_chars(struct tty_struct *tty) +{ + mp_start(tty); +} + +static int mp_write(struct tty_struct *tty, const unsigned char * buf, int count) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port; + struct circ_buf *circ; + int c, ret = 0; + + if (!state || !state->info) { + return -EL3HLT; + } + + port = state->port; + circ = &state->info->xmit; + + if (!circ->buf) + return 0; + + while (1) { + c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(circ->buf + circ->head, buf, c); + + circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); + buf += c; + count -= c; + ret += c; + } + mp_start(tty); + return ret; +} + +static int mp_write_room(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + + return uart_circ_chars_free(&state->info->xmit); +} + +static int mp_chars_in_buffer(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + + return uart_circ_chars_pending(&state->info->xmit); +} + +static void mp_flush_buffer(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + unsigned long flags; + + if (!state || !state->info) { + return; + } + + spin_lock_irqsave(&port->lock, flags); + uart_circ_clear(&state->info->xmit); + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&tty->write_wait); + tty_wakeup(tty); +} + +static void mp_send_xchar(struct tty_struct *tty, char ch) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + unsigned long flags; + + if (port->ops->send_xchar) + port->ops->send_xchar(port, ch); + else { + port->x_char = ch; + if (ch) { + spin_lock_irqsave(&port->lock, flags); + port->ops->start_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + } + } +} + +static void mp_throttle(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + + if (I_IXOFF(tty)) + mp_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios.c_cflag & CRTSCTS) + uart_clear_mctrl(state->port, TIOCM_RTS); +} + +static void mp_unthrottle(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + + if (I_IXOFF(tty)) { + if (port->x_char) + port->x_char = 0; + else + mp_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios.c_cflag & CRTSCTS) + uart_set_mctrl(port, TIOCM_RTS); +} + +static int mp_get_info(struct sb_uart_state *state, struct serial_struct *retinfo) +{ + struct sb_uart_port *port = state->port; + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = port->type; + tmp.line = port->line; + tmp.port = port->iobase; + if (HIGH_BITS_OFFSET) + tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET; + tmp.irq = port->irq; + tmp.flags = port->flags; + tmp.xmit_fifo_size = port->fifosize; + tmp.baud_base = port->uartclk / 16; + tmp.close_delay = state->close_delay; + tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + state->closing_wait; + tmp.custom_divisor = port->custom_divisor; + tmp.hub6 = port->hub6; + tmp.io_type = port->iotype; + tmp.iomem_reg_shift = port->regshift; + tmp.iomem_base = (void *)port->mapbase; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int mp_set_info(struct sb_uart_state *state, struct serial_struct *newinfo) +{ + struct serial_struct new_serial; + struct sb_uart_port *port = state->port; + unsigned long new_port; + unsigned int change_irq, change_port, closing_wait; + unsigned int old_custom_divisor; + unsigned int old_flags, new_flags; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + new_port = new_serial.port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; + + new_serial.irq = irq_canonicalize(new_serial.irq); + + closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + USF_CLOSING_WAIT_NONE : new_serial.closing_wait; + MP_STATE_LOCK(state); + + change_irq = new_serial.irq != port->irq; + change_port = new_port != port->iobase || + (unsigned long)new_serial.iomem_base != port->mapbase || + new_serial.hub6 != port->hub6 || + new_serial.io_type != port->iotype || + new_serial.iomem_reg_shift != port->regshift || + new_serial.type != port->type; + old_flags = port->flags; + new_flags = new_serial.flags; + old_custom_divisor = port->custom_divisor; + + if (!capable(CAP_SYS_ADMIN)) { + retval = -EPERM; + if (change_irq || change_port || + (new_serial.baud_base != port->uartclk / 16) || + (new_serial.close_delay != state->close_delay) || + (closing_wait != state->closing_wait) || + (new_serial.xmit_fifo_size != port->fifosize) || + (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) + goto exit; + port->flags = ((port->flags & ~UPF_USR_MASK) | + (new_flags & UPF_USR_MASK)); + port->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (port->ops->verify_port) + retval = port->ops->verify_port(port, &new_serial); + + if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) || + (new_serial.baud_base < 9600)) + retval = -EINVAL; + + if (retval) + goto exit; + + if (change_port || change_irq) { + retval = -EBUSY; + + if (uart_users(state) > 1) + goto exit; + + mp_shutdown(state); + } + + if (change_port) { + unsigned long old_iobase, old_mapbase; + unsigned int old_type, old_iotype, old_hub6, old_shift; + + old_iobase = port->iobase; + old_mapbase = port->mapbase; + old_type = port->type; + old_hub6 = port->hub6; + old_iotype = port->iotype; + old_shift = port->regshift; + + if (old_type != PORT_UNKNOWN) + port->ops->release_port(port); + + port->iobase = new_port; + port->type = new_serial.type; + port->hub6 = new_serial.hub6; + port->iotype = new_serial.io_type; + port->regshift = new_serial.iomem_reg_shift; + port->mapbase = (unsigned long)new_serial.iomem_base; + + if (port->type != PORT_UNKNOWN) { + retval = port->ops->request_port(port); + } else { + retval = 0; + } + + if (retval && old_type != PORT_UNKNOWN) { + port->iobase = old_iobase; + port->type = old_type; + port->hub6 = old_hub6; + port->iotype = old_iotype; + port->regshift = old_shift; + port->mapbase = old_mapbase; + retval = port->ops->request_port(port); + if (retval) + port->type = PORT_UNKNOWN; + + retval = -EBUSY; + } + } + + port->irq = new_serial.irq; + port->uartclk = new_serial.baud_base * 16; + port->flags = (port->flags & ~UPF_CHANGE_MASK) | + (new_flags & UPF_CHANGE_MASK); + port->custom_divisor = new_serial.custom_divisor; + state->close_delay = new_serial.close_delay; + state->closing_wait = closing_wait; + port->fifosize = new_serial.xmit_fifo_size; + if (state->info->tty) + state->info->tty->low_latency = + (port->flags & UPF_LOW_LATENCY) ? 1 : 0; + +check_and_exit: + retval = 0; + if (port->type == PORT_UNKNOWN) + goto exit; + if (state->info->flags & UIF_INITIALIZED) { + if (((old_flags ^ port->flags) & UPF_SPD_MASK) || + old_custom_divisor != port->custom_divisor) { + if (port->flags & UPF_SPD_MASK) { + printk(KERN_NOTICE + "%s sets custom speed on ttyMP%d. This " + "is deprecated.\n", current->comm, + port->line); + } + mp_change_speed(state, NULL); + } + } else + retval = mp_startup(state, 1); +exit: + MP_STATE_UNLOCK(state); + return retval; +} + + +static int mp_get_lsr_info(struct sb_uart_state *state, unsigned int *value) +{ + struct sb_uart_port *port = state->port; + unsigned int result; + + result = port->ops->tx_empty(port); + + if (port->x_char || + ((uart_circ_chars_pending(&state->info->xmit) > 0) && + !state->info->tty->stopped && !state->info->tty->hw_stopped)) + result &= ~TIOCSER_TEMT; + + return put_user(result, value); +} + +static int mp_tiocmget(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + int result = -EIO; + + MP_STATE_LOCK(state); + if (!(tty->flags & (1 << TTY_IO_ERROR))) { + result = port->mctrl; + spin_lock_irq(&port->lock); + result |= port->ops->get_mctrl(port); + spin_unlock_irq(&port->lock); + } + MP_STATE_UNLOCK(state); + return result; +} + +static int mp_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + int ret = -EIO; + + + MP_STATE_LOCK(state); + if (!(tty->flags & (1 << TTY_IO_ERROR))) { + mp_update_mctrl(port, set, clear); + ret = 0; + } + MP_STATE_UNLOCK(state); + + return ret; +} + +static int mp_break_ctl(struct tty_struct *tty, int break_state) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + + MP_STATE_LOCK(state); + + if (port->type != PORT_UNKNOWN) + port->ops->break_ctl(port, break_state); + + MP_STATE_UNLOCK(state); + return 0; +} + +static int mp_do_autoconfig(struct sb_uart_state *state) +{ + struct sb_uart_port *port = state->port; + int flags, ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (mutex_lock_interruptible(&state->mutex)) + return -ERESTARTSYS; + ret = -EBUSY; + if (uart_users(state) == 1) { + mp_shutdown(state); + + if (port->type != PORT_UNKNOWN) + port->ops->release_port(port); + + flags = UART_CONFIG_TYPE; + if (port->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + + port->ops->config_port(port, flags); + + ret = mp_startup(state, 1); + } + MP_STATE_UNLOCK(state); + return ret; +} + +static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg) +{ + struct sb_uart_port *port = state->port; + DECLARE_WAITQUEUE(wait, current); + struct sb_uart_icount cprev, cnow; + int ret; + + spin_lock_irq(&port->lock); + memcpy(&cprev, &port->icount, sizeof(struct sb_uart_icount)); + + port->ops->enable_ms(port); + spin_unlock_irq(&port->lock); + + add_wait_queue(&state->info->delta_msr_wait, &wait); + for (;;) { + spin_lock_irq(&port->lock); + memcpy(&cnow, &port->icount, sizeof(struct sb_uart_icount)); + spin_unlock_irq(&port->lock); + + set_current_state(TASK_INTERRUPTIBLE); + + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + ret = 0; + break; + } + + schedule(); + + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + + cprev = cnow; + } + + current->state = TASK_RUNNING; + remove_wait_queue(&state->info->delta_msr_wait, &wait); + + return ret; +} + +static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt) +{ + struct serial_icounter_struct icount; + struct sb_uart_icount cnow; + struct sb_uart_port *port = state->port; + + spin_lock_irq(&port->lock); + memcpy(&cnow, &port->icount, sizeof(struct sb_uart_icount)); + spin_unlock_irq(&port->lock); + + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0; +} + +static int mp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) +{ + struct sb_uart_state *state = tty->driver_data; + struct mp_port *info = (struct mp_port *)state->port; + int ret = -ENOIOCTLCMD; + + + switch (cmd) { + case TIOCSMULTIDROP: + /* set multi-drop mode enable or disable, and default operation mode is H/W mode */ + if (info->port.type == PORT_16C105XA) + { + //arg &= ~0x6; + //state->port->mdmode = 0; + return set_multidrop_mode((struct sb_uart_port *)info, (unsigned int)arg); + } + ret = -ENOTSUPP; + break; + case GETDEEPFIFO: + ret = get_deep_fifo(state->port); + return ret; + case SETDEEPFIFO: + ret = set_deep_fifo(state->port,arg); + deep[state->port->line] = arg; + return ret; + case SETTTR: + if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){ + ret = sb1054_set_register(state->port,PAGE_4,SB105X_TTR,arg); + ttr[state->port->line] = arg; + } + return ret; + case SETRTR: + if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){ + ret = sb1054_set_register(state->port,PAGE_4,SB105X_RTR,arg); + rtr[state->port->line] = arg; + } + return ret; + case GETTTR: + if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){ + ret = sb1054_get_register(state->port,PAGE_4,SB105X_TTR); + } + return ret; + case GETRTR: + if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){ + ret = sb1054_get_register(state->port,PAGE_4,SB105X_RTR); + } + return ret; + + case SETFCR: + if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){ + ret = sb1054_set_register(state->port,PAGE_1,SB105X_FCR,arg); + } + else{ + serial_out(info,2,arg); + } + + return ret; + case TIOCSMDADDR: + /* set multi-drop address */ + if (info->port.type == PORT_16C105XA) + { + state->port->mdmode |= MDMODE_ADDR; + return set_multidrop_addr((struct sb_uart_port *)info, (unsigned int)arg); + } + ret = -ENOTSUPP; + break; + + case TIOCGMDADDR: + /* set multi-drop address */ + if ((info->port.type == PORT_16C105XA) && (state->port->mdmode & MDMODE_ADDR)) + { + return get_multidrop_addr((struct sb_uart_port *)info); + } + ret = -ENOTSUPP; + break; + + case TIOCSENDADDR: + /* send address in multi-drop mode */ + if ((info->port.type == PORT_16C105XA) + && (state->port->mdmode & (MDMODE_ENABLE))) + { + if (mp_chars_in_buffer(tty) > 0) + { + tty_wait_until_sent(tty, 0); + } + //while ((serial_in(info, UART_LSR) & 0x60) != 0x60); + //while (sb1054_get_register(state->port, PAGE_2, SB105X_TFCR) != 0); + while ((serial_in(info, UART_LSR) & 0x60) != 0x60); + serial_out(info, UART_SCR, (int)arg); + } + break; + + case TIOCGSERIAL: + ret = mp_get_info(state, (struct serial_struct *)arg); + break; + + case TIOCSSERIAL: + ret = mp_set_info(state, (struct serial_struct *)arg); + break; + + case TIOCSERCONFIG: + ret = mp_do_autoconfig(state); + break; + + case TIOCSERGWILD: /* obsolete */ + case TIOCSERSWILD: /* obsolete */ + ret = 0; + break; + /* for Multiport */ + case TIOCGNUMOFPORT: /* Get number of ports */ + return NR_PORTS; + case TIOCGGETDEVID: + return mp_devs[arg].device_id; + case TIOCGGETREV: + return mp_devs[arg].revision; + case TIOCGGETNRPORTS: + return mp_devs[arg].nr_ports; + case TIOCGGETBDNO: + return NR_BOARD; + case TIOCGGETINTERFACE: + if (mp_devs[arg].revision == 0xc0) + { + /* for SB16C1053APCI */ + return (sb1053a_get_interface(info, info->port.line)); + } + else + { + return (inb(mp_devs[arg].option_reg_addr+MP_OPTR_IIR0+(state->port->line/8))); + } + case TIOCGGETPORTTYPE: + ret = get_device_type(arg);; + return ret; + case TIOCSMULTIECHO: /* set to multi-drop mode(RS422) or echo mode(RS485)*/ + outb( ( inb(info->interface_config_addr) & ~0x03 ) | 0x01 , + info->interface_config_addr); + return 0; + case TIOCSPTPNOECHO: /* set to multi-drop mode(RS422) or echo mode(RS485) */ + outb( ( inb(info->interface_config_addr) & ~0x03 ) , + info->interface_config_addr); + return 0; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + if (tty->flags & (1 << TTY_IO_ERROR)) { + ret = -EIO; + goto out; + } + + switch (cmd) { + case TIOCMIWAIT: + ret = mp_wait_modem_status(state, arg); + break; + + case TIOCGICOUNT: + ret = mp_get_count(state, (struct serial_icounter_struct *)arg); + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + MP_STATE_LOCK(state); + switch (cmd) { + case TIOCSERGETLSR: /* Get line status register */ + ret = mp_get_lsr_info(state, (unsigned int *)arg); + break; + + default: { + struct sb_uart_port *port = state->port; + if (port->ops->ioctl) + ret = port->ops->ioctl(port, cmd, arg); + break; + } + } + + MP_STATE_UNLOCK(state); +out: + return ret; +} + +static void mp_set_termios(struct tty_struct *tty, struct MP_TERMIOS *old_termios) +{ + struct sb_uart_state *state = tty->driver_data; + unsigned long flags; + unsigned int cflag = tty->termios.c_cflag; + +#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + if ((cflag ^ old_termios->c_cflag) == 0 && + RELEVANT_IFLAG(tty->termios.c_iflag ^ old_termios->c_iflag) == 0) + return; + + mp_change_speed(state, old_termios); + + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) + uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR); + + if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + unsigned int mask = TIOCM_DTR; + if (!(cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) + mask |= TIOCM_RTS; + uart_set_mctrl(state->port, mask); + } + + if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { + spin_lock_irqsave(&state->port->lock, flags); + tty->hw_stopped = 0; + __mp_start(tty); + spin_unlock_irqrestore(&state->port->lock, flags); + } + + if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { + spin_lock_irqsave(&state->port->lock, flags); + if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) { + tty->hw_stopped = 1; + state->port->ops->stop_tx(state->port); + } + spin_unlock_irqrestore(&state->port->lock, flags); + } +} + +static void mp_close(struct tty_struct *tty, struct file *filp) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port; + + printk("mp_close!\n"); + if (!state || !state->port) + return; + + port = state->port; + + printk("close1 %d\n", __LINE__); + MP_STATE_LOCK(state); + + printk("close2 %d\n", __LINE__); + if (tty_hung_up_p(filp)) + goto done; + + printk("close3 %d\n", __LINE__); + if ((tty->count == 1) && (state->count != 1)) { + printk("mp_close: bad serial port count; tty->count is 1, " + "state->count is %d\n", state->count); + state->count = 1; + } + printk("close4 %d\n", __LINE__); + if (--state->count < 0) { + printk("rs_close: bad serial port count for ttyMP%d: %d\n", + port->line, state->count); + state->count = 0; + } + if (state->count) + goto done; + + tty->closing = 1; + + printk("close5 %d\n", __LINE__); + if (state->closing_wait != USF_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, state->closing_wait); + + printk("close6 %d\n", __LINE__); + if (state->info->flags & UIF_INITIALIZED) { + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + port->ops->stop_rx(port); + spin_unlock_irqrestore(&port->lock, flags); + mp_wait_until_sent(tty, port->timeout); + } + printk("close7 %d\n", __LINE__); + + mp_shutdown(state); + printk("close8 %d\n", __LINE__); + mp_flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + state->info->tty = NULL; + if (state->info->blocked_open) + { + if (state->close_delay) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(state->close_delay); + } + } + else + { + mp_change_pm(state, 3); + } + printk("close8 %d\n", __LINE__); + + state->info->flags &= ~UIF_NORMAL_ACTIVE; + wake_up_interruptible(&state->info->open_wait); + +done: + printk("close done\n"); + MP_STATE_UNLOCK(state); + module_put(THIS_MODULE); +} + +static void mp_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct sb_uart_state *state = tty->driver_data; + struct sb_uart_port *port = state->port; + unsigned long char_time, expire; + + if (port->type == PORT_UNKNOWN || port->fifosize == 0) + return; + + char_time = (port->timeout - HZ/50) / port->fifosize; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + + if (timeout == 0 || timeout > 2 * port->timeout) + timeout = 2 * port->timeout; + + expire = jiffies + timeout; + + while (!port->ops->tx_empty(port)) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(char_time); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } + set_current_state(TASK_RUNNING); /* might not be needed */ +} + +static void mp_hangup(struct tty_struct *tty) +{ + struct sb_uart_state *state = tty->driver_data; + + MP_STATE_LOCK(state); + if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) { + mp_flush_buffer(tty); + mp_shutdown(state); + state->count = 0; + state->info->flags &= ~UIF_NORMAL_ACTIVE; + state->info->tty = NULL; + wake_up_interruptible(&state->info->open_wait); + wake_up_interruptible(&state->info->delta_msr_wait); + } + MP_STATE_UNLOCK(state); +} + +static void mp_update_termios(struct sb_uart_state *state) +{ + struct tty_struct *tty = state->info->tty; + struct sb_uart_port *port = state->port; + + if (!(tty->flags & (1 << TTY_IO_ERROR))) { + mp_change_speed(state, NULL); + + if (tty->termios.c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } +} + +static int mp_block_til_ready(struct file *filp, struct sb_uart_state *state) +{ + DECLARE_WAITQUEUE(wait, current); + struct sb_uart_info *info = state->info; + struct sb_uart_port *port = state->port; + unsigned int mctrl; + + info->blocked_open++; + state->count--; + + add_wait_queue(&info->open_wait, &wait); + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || info->tty == NULL) + break; + + if (!(info->flags & UIF_INITIALIZED)) + break; + + if ((filp->f_flags & O_NONBLOCK) || + (info->tty->termios.c_cflag & CLOCAL) || + (info->tty->flags & (1 << TTY_IO_ERROR))) { + break; + } + + if (info->tty->termios.c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_DTR); + + spin_lock_irq(&port->lock); + port->ops->enable_ms(port); + mctrl = port->ops->get_mctrl(port); + spin_unlock_irq(&port->lock); + if (mctrl & TIOCM_CAR) + break; + + MP_STATE_UNLOCK(state); + schedule(); + MP_STATE_LOCK(state); + + if (signal_pending(current)) + break; + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + + state->count++; + info->blocked_open--; + + if (signal_pending(current)) + return -ERESTARTSYS; + + if (!info->tty || tty_hung_up_p(filp)) + return -EAGAIN; + + return 0; +} + +static struct sb_uart_state *uart_get(struct uart_driver *drv, int line) +{ + struct sb_uart_state *state; + + MP_MUTEX_LOCK(mp_mutex); + state = drv->state + line; + if (mutex_lock_interruptible(&state->mutex)) { + state = ERR_PTR(-ERESTARTSYS); + goto out; + } + state->count++; + if (!state->port) { + state->count--; + MP_STATE_UNLOCK(state); + state = ERR_PTR(-ENXIO); + goto out; + } + + if (!state->info) { + state->info = kmalloc(sizeof(struct sb_uart_info), GFP_KERNEL); + if (state->info) { + memset(state->info, 0, sizeof(struct sb_uart_info)); + init_waitqueue_head(&state->info->open_wait); + init_waitqueue_head(&state->info->delta_msr_wait); + + state->port->info = state->info; + + tasklet_init(&state->info->tlet, mp_tasklet_action, + (unsigned long)state); + } else { + state->count--; + MP_STATE_UNLOCK(state); + state = ERR_PTR(-ENOMEM); + } + } + +out: + MP_MUTEX_UNLOCK(mp_mutex); + return state; +} + +static int mp_open(struct tty_struct *tty, struct file *filp) +{ + struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; + struct sb_uart_state *state; + int retval; + int line = tty->index; + struct mp_port *mtpt; + + retval = -ENODEV; + if (line >= tty->driver->num) + goto fail; + + state = uart_get(drv, line); + + mtpt = (struct mp_port *)state->port; + + if (IS_ERR(state)) { + retval = PTR_ERR(state); + goto fail; + } + + tty->driver_data = state; + tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0; + tty->alt_speed = 0; + state->info->tty = tty; + + if (tty_hung_up_p(filp)) { + retval = -EAGAIN; + state->count--; + MP_STATE_UNLOCK(state); + goto fail; + } + + if (state->count == 1) + mp_change_pm(state, 0); + + retval = mp_startup(state, 0); + + if (retval == 0) + retval = mp_block_til_ready(filp, state); + MP_STATE_UNLOCK(state); + + if (retval == 0 && !(state->info->flags & UIF_NORMAL_ACTIVE)) { + state->info->flags |= UIF_NORMAL_ACTIVE; + + mp_update_termios(state); + } + + uart_clear_mctrl(state->port, TIOCM_RTS); + try_module_get(THIS_MODULE); +fail: + return retval; +} + + +static const char *mp_type(struct sb_uart_port *port) +{ + const char *str = NULL; + + if (port->ops->type) + str = port->ops->type(port); + + if (!str) + str = "unknown"; + + return str; +} + +static void mp_change_pm(struct sb_uart_state *state, int pm_state) +{ + struct sb_uart_port *port = state->port; + if (port->ops->pm) + port->ops->pm(port, pm_state, state->pm_state); + state->pm_state = pm_state; +} + +static inline void mp_report_port(struct uart_driver *drv, struct sb_uart_port *port) +{ + char address[64]; + + switch (port->iotype) { + case UPIO_PORT: + snprintf(address, sizeof(address),"I/O 0x%x", port->iobase); + break; + case UPIO_HUB6: + snprintf(address, sizeof(address),"I/O 0x%x offset 0x%x", port->iobase, port->hub6); + break; + case UPIO_MEM: + snprintf(address, sizeof(address),"MMIO 0x%lx", port->mapbase); + break; + default: + snprintf(address, sizeof(address),"*unknown*" ); + strlcpy(address, "*unknown*", sizeof(address)); + break; + } + + printk( "%s%d at %s (irq = %d) is a %s\n", + drv->dev_name, port->line, address, port->irq, mp_type(port)); + +} + +static void mp_configure_port(struct uart_driver *drv, struct sb_uart_state *state, struct sb_uart_port *port) +{ + unsigned int flags; + + + if (!port->iobase && !port->mapbase && !port->membase) + { + DPRINTK("%s error \n",__FUNCTION__); + return; + } + flags = UART_CONFIG_TYPE; + if (port->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + if (port->flags & UPF_BOOT_AUTOCONF) { + port->type = PORT_UNKNOWN; + port->ops->config_port(port, flags); + } + + if (port->type != PORT_UNKNOWN) { + unsigned long flags; + + mp_report_port(drv, port); + + spin_lock_irqsave(&port->lock, flags); + port->ops->set_mctrl(port, 0); + spin_unlock_irqrestore(&port->lock, flags); + + mp_change_pm(state, 3); + } +} + +static void mp_unconfigure_port(struct uart_driver *drv, struct sb_uart_state *state) +{ + struct sb_uart_port *port = state->port; + struct sb_uart_info *info = state->info; + + if (info && info->tty) + tty_hangup(info->tty); + + MP_STATE_LOCK(state); + + state->info = NULL; + + if (port->type != PORT_UNKNOWN) + port->ops->release_port(port); + + port->type = PORT_UNKNOWN; + + if (info) { + tasklet_kill(&info->tlet); + kfree(info); + } + + MP_STATE_UNLOCK(state); +} +static struct tty_operations mp_ops = { + .open = mp_open, + .close = mp_close, + .write = mp_write, + .put_char = mp_put_char, + .flush_chars = mp_put_chars, + .write_room = mp_write_room, + .chars_in_buffer= mp_chars_in_buffer, + .flush_buffer = mp_flush_buffer, + .ioctl = mp_ioctl, + .throttle = mp_throttle, + .unthrottle = mp_unthrottle, + .send_xchar = mp_send_xchar, + .set_termios = mp_set_termios, + .stop = mp_stop, + .start = mp_start, + .hangup = mp_hangup, + .break_ctl = mp_break_ctl, + .wait_until_sent= mp_wait_until_sent, +#ifdef CONFIG_PROC_FS + .proc_fops = NULL, +#endif + .tiocmget = mp_tiocmget, + .tiocmset = mp_tiocmset, +}; + +static int mp_register_driver(struct uart_driver *drv) +{ + struct tty_driver *normal = NULL; + int i, retval; + + drv->state = kmalloc(sizeof(struct sb_uart_state) * drv->nr, GFP_KERNEL); + retval = -ENOMEM; + if (!drv->state) + { + printk("SB PCI Error: Kernel memory allocation error!\n"); + goto out; + } + memset(drv->state, 0, sizeof(struct sb_uart_state) * drv->nr); + + normal = alloc_tty_driver(drv->nr); + if (!normal) + { + printk("SB PCI Error: tty allocation error!\n"); + goto out; + } + + drv->tty_driver = normal; + + normal->owner = drv->owner; + normal->magic = TTY_DRIVER_MAGIC; + normal->driver_name = drv->driver_name; + normal->name = drv->dev_name; + normal->major = drv->major; + normal->minor_start = drv->minor; + + normal->num = MAX_MP_PORT ; + + normal->type = TTY_DRIVER_TYPE_SERIAL; + normal->subtype = SERIAL_TYPE_NORMAL; + normal->init_termios = tty_std_termios; + normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + normal->driver_state = drv; + + tty_set_operations(normal, &mp_ops); + +for (i = 0; i < drv->nr; i++) { + struct sb_uart_state *state = drv->state + i; + + state->close_delay = 500; + state->closing_wait = 30000; + + mutex_init(&state->mutex); + } + + retval = tty_register_driver(normal); +out: + if (retval < 0) { + printk("Register tty driver Fail!\n"); + put_tty_driver(normal); + kfree(drv->state); + } + + return retval; +} + +void mp_unregister_driver(struct uart_driver *drv) +{ + struct tty_driver *normal = NULL; + + normal = drv->tty_driver; + + if (!normal) + { + return; + } + + tty_unregister_driver(normal); + put_tty_driver(normal); + drv->tty_driver = NULL; + + + if (drv->state) + { + kfree(drv->state); + } + +} + +static int mp_add_one_port(struct uart_driver *drv, struct sb_uart_port *port) +{ + struct sb_uart_state *state; + int ret = 0; + + + if (port->line >= drv->nr) + return -EINVAL; + + state = drv->state + port->line; + + MP_MUTEX_LOCK(mp_mutex); + if (state->port) { + ret = -EINVAL; + goto out; + } + + state->port = port; + + spin_lock_init(&port->lock); + port->cons = drv->cons; + port->info = state->info; + + mp_configure_port(drv, state, port); + + tty_register_device(drv->tty_driver, port->line, port->dev); + +out: + MP_MUTEX_UNLOCK(mp_mutex); + + + return ret; +} + +static int mp_remove_one_port(struct uart_driver *drv, struct sb_uart_port *port) +{ + struct sb_uart_state *state = drv->state + port->line; + + if (state->port != port) + printk(KERN_ALERT "Removing wrong port: %p != %p\n", + state->port, port); + + MP_MUTEX_LOCK(mp_mutex); + + tty_unregister_device(drv->tty_driver, port->line); + + mp_unconfigure_port(drv, state); + state->port = NULL; + MP_MUTEX_UNLOCK(mp_mutex); + + return 0; +} + +static void autoconfig(struct mp_port *mtpt, unsigned int probeflags) +{ + unsigned char status1, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + unsigned char u_type; + unsigned char b_ret = 0; + + if (!mtpt->port.iobase && !mtpt->port.mapbase && !mtpt->port.membase) + return; + + DEBUG_AUTOCONF("ttyMP%d: autoconf (0x%04x, 0x%p): ", + mtpt->port.line, mtpt->port.iobase, mtpt->port.membase); + + spin_lock_irqsave(&mtpt->port.lock, flags); + + if (!(mtpt->port.flags & UPF_BUGGY_UART)) { + scratch = serial_inp(mtpt, UART_IER); + serial_outp(mtpt, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = serial_inp(mtpt, UART_IER) & 0x0f; + serial_outp(mtpt, UART_IER, 0x0F); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(mtpt, UART_IER) & 0x0F; + serial_outp(mtpt, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) { + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; + } + } + + save_mcr = serial_in(mtpt, UART_MCR); + save_lcr = serial_in(mtpt, UART_LCR); + + if (!(mtpt->port.flags & UPF_SKIP_TEST)) { + serial_outp(mtpt, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(mtpt, UART_MSR) & 0xF0; + serial_outp(mtpt, UART_MCR, save_mcr); + if (status1 != 0x90) { + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; + } + } + + serial_outp(mtpt, UART_LCR, 0xBF); + serial_outp(mtpt, UART_EFR, 0); + serial_outp(mtpt, UART_LCR, 0); + + serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(mtpt, UART_IIR) >> 6; + + DEBUG_AUTOCONF("iir=%d ", scratch); + if(mtpt->device->nr_ports >= 8) + b_ret = read_option_register(mtpt,(MP_OPTR_DIR0 + ((mtpt->port.line)/8))); + else + b_ret = read_option_register(mtpt,MP_OPTR_DIR0); + u_type = (b_ret & 0xf0) >> 4; + if(mtpt->port.type == PORT_UNKNOWN ) + { + switch (u_type) + { + case DIR_UART_16C550: + mtpt->port.type = PORT_16C55X; + break; + case DIR_UART_16C1050: + mtpt->port.type = PORT_16C105X; + break; + case DIR_UART_16C1050A: + if (mtpt->port.line < 2) + { + mtpt->port.type = PORT_16C105XA; + } + else + { + if (mtpt->device->device_id & 0x50) + { + mtpt->port.type = PORT_16C55X; + } + else + { + mtpt->port.type = PORT_16C105X; + } + } + break; + default: + mtpt->port.type = PORT_UNKNOWN; + break; + } + } + + if(mtpt->port.type == PORT_UNKNOWN ) + { +printk("unknow2\n"); + switch (scratch) { + case 0: + case 1: + mtpt->port.type = PORT_UNKNOWN; + break; + case 2: + case 3: + mtpt->port.type = PORT_16C55X; + break; + } + } + + serial_outp(mtpt, UART_LCR, save_lcr); + + mtpt->port.fifosize = uart_config[mtpt->port.type].dfl_xmit_fifo_size; + mtpt->capabilities = uart_config[mtpt->port.type].flags; + + if (mtpt->port.type == PORT_UNKNOWN) + goto out; + serial_outp(mtpt, UART_MCR, save_mcr); + serial_outp(mtpt, UART_FCR, (UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT)); + serial_outp(mtpt, UART_FCR, 0); + (void)serial_in(mtpt, UART_RX); + serial_outp(mtpt, UART_IER, 0); + +out: + spin_unlock_irqrestore(&mtpt->port.lock, flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[mtpt->port.type].name); +} + +static void autoconfig_irq(struct mp_port *mtpt) +{ + unsigned char save_mcr, save_ier; + unsigned long irqs; + int irq; + + /* forget possible initially masked and pending IRQ */ + probe_irq_off(probe_irq_on()); + save_mcr = serial_inp(mtpt, UART_MCR); + save_ier = serial_inp(mtpt, UART_IER); + serial_outp(mtpt, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); + serial_outp(mtpt, UART_MCR, 0); + serial_outp(mtpt, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + + serial_outp(mtpt, UART_IER, 0x0f); /* enable all intrs */ + (void)serial_inp(mtpt, UART_LSR); + (void)serial_inp(mtpt, UART_RX); + (void)serial_inp(mtpt, UART_IIR); + (void)serial_inp(mtpt, UART_MSR); + serial_outp(mtpt, UART_TX, 0xFF); + irq = probe_irq_off(irqs); + + serial_outp(mtpt, UART_MCR, save_mcr); + serial_outp(mtpt, UART_IER, save_ier); + + mtpt->port.irq = (irq > 0) ? irq : 0; +} + +static void multi_stop_tx(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + + if (mtpt->ier & UART_IER_THRI) { + mtpt->ier &= ~UART_IER_THRI; + serial_out(mtpt, UART_IER, mtpt->ier); + } + + tasklet_schedule(&port->info->tlet); +} + +static void multi_start_tx(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + + if (!(mtpt->ier & UART_IER_THRI)) { + mtpt->ier |= UART_IER_THRI; + serial_out(mtpt, UART_IER, mtpt->ier); + } +} + +static void multi_stop_rx(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + + mtpt->ier &= ~UART_IER_RLSI; + mtpt->port.read_status_mask &= ~UART_LSR_DR; + serial_out(mtpt, UART_IER, mtpt->ier); +} + +static void multi_enable_ms(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + + mtpt->ier |= UART_IER_MSI; + serial_out(mtpt, UART_IER, mtpt->ier); +} + + +static _INLINE_ void receive_chars(struct mp_port *mtpt, int *status ) +{ + struct tty_struct *tty = mtpt->port.info->tty; + unsigned char lsr = *status; + int max_count = 256; + unsigned char ch; + char flag; + + //lsr &= mtpt->port.read_status_mask; + + do { + if ((lsr & UART_LSR_PE) && (mtpt->port.mdmode & MDMODE_ENABLE)) + { + ch = serial_inp(mtpt, UART_RX); + } + else if (lsr & UART_LSR_SPECIAL) + { + flag = 0; + ch = serial_inp(mtpt, UART_RX); + + if (lsr & UART_LSR_BI) + { + + mtpt->port.icount.brk++; + flag = TTY_BREAK; + + if (sb_uart_handle_break(&mtpt->port)) + goto ignore_char; + } + if (lsr & UART_LSR_PE) + { + mtpt->port.icount.parity++; + flag = TTY_PARITY; + } + if (lsr & UART_LSR_FE) + { + mtpt->port.icount.frame++; + flag = TTY_FRAME; + } + if (lsr & UART_LSR_OE) + { + mtpt->port.icount.overrun++; + flag = TTY_OVERRUN; + } + tty_insert_flip_char(tty, ch, flag); + } + else + { + ch = serial_inp(mtpt, UART_RX); + tty_insert_flip_char(tty, ch, 0); + } +ignore_char: + lsr = serial_inp(mtpt, UART_LSR); + } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + + tty_flip_buffer_push(tty); +} + + + + +static _INLINE_ void transmit_chars(struct mp_port *mtpt) +{ + struct circ_buf *xmit = &mtpt->port.info->xmit; + int count; + + if (mtpt->port.x_char) { + serial_outp(mtpt, UART_TX, mtpt->port.x_char); + mtpt->port.icount.tx++; + mtpt->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&mtpt->port)) { + multi_stop_tx(&mtpt->port); + return; + } + + count = uart_circ_chars_pending(xmit); + + if(count > mtpt->port.fifosize) + { + count = mtpt->port.fifosize; + } + + printk("[%d] mdmode: %x\n", mtpt->port.line, mtpt->port.mdmode); + do { +#if 0 + /* check multi-drop mode */ + if ((mtpt->port.mdmode & (MDMODE_ENABLE | MDMODE_ADDR)) == (MDMODE_ENABLE | MDMODE_ADDR)) + { + printk("send address\n"); + /* send multi-drop address */ + serial_out(mtpt, UART_SCR, xmit->buf[xmit->tail]); + } + else +#endif + { + serial_out(mtpt, UART_TX, xmit->buf[xmit->tail]); + } + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + mtpt->port.icount.tx++; + } while (--count > 0); +} + + + +static _INLINE_ void check_modem_status(struct mp_port *mtpt) +{ + int status; + + status = serial_in(mtpt, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + mtpt->port.icount.rng++; + if (status & UART_MSR_DDSR) + mtpt->port.icount.dsr++; + if (status & UART_MSR_DDCD) + sb_uart_handle_dcd_change(&mtpt->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + sb_uart_handle_cts_change(&mtpt->port, status & UART_MSR_CTS); + + wake_up_interruptible(&mtpt->port.info->delta_msr_wait); +} + +static inline void multi_handle_port(struct mp_port *mtpt) +{ + unsigned int status = serial_inp(mtpt, UART_LSR); + + //printk("lsr: %x\n", status); + + if ((status & UART_LSR_DR) || (status & UART_LSR_SPECIAL)) + receive_chars(mtpt, &status); + check_modem_status(mtpt); + if (status & UART_LSR_THRE) + { + if ((mtpt->port.type == PORT_16C105X) + || (mtpt->port.type == PORT_16C105XA)) + transmit_chars(mtpt); + else + { + if (mtpt->interface >= RS485NE) + uart_set_mctrl(&mtpt->port, TIOCM_RTS); + + transmit_chars(mtpt); + + + if (mtpt->interface >= RS485NE) + { + while((status=serial_in(mtpt,UART_LSR) &0x60)!=0x60); + uart_clear_mctrl(&mtpt->port, TIOCM_RTS); + } + } + } +} + + + +static irqreturn_t multi_interrupt(int irq, void *dev_id) +{ + struct irq_info *iinfo = dev_id; + struct list_head *lhead, *end = NULL; + int pass_counter = 0; + + + spin_lock(&iinfo->lock); + + lhead = iinfo->head; + do { + struct mp_port *mtpt; + unsigned int iir; + + mtpt = list_entry(lhead, struct mp_port, list); + + iir = serial_in(mtpt, UART_IIR); + printk("intrrupt! port %d, iir 0x%x\n", mtpt->port.line, iir); //wlee + if (!(iir & UART_IIR_NO_INT)) + { + printk("interrupt handle\n"); + spin_lock(&mtpt->port.lock); + multi_handle_port(mtpt); + spin_unlock(&mtpt->port.lock); + + end = NULL; + } else if (end == NULL) + end = lhead; + + lhead = lhead->next; + if (lhead == iinfo->head && pass_counter++ > PASS_LIMIT) + { + printk(KERN_ERR "multi: too much work for " + "irq%d\n", irq); + printk( "multi: too much work for " + "irq%d\n", irq); + break; + } + } while (lhead != end); + + spin_unlock(&iinfo->lock); + + + return IRQ_HANDLED; +} + +static void serial_do_unlink(struct irq_info *i, struct mp_port *mtpt) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &mtpt->list) + i->head = i->head->next; + list_del(&mtpt->list); + } else { + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct mp_port *mtpt) +{ + struct irq_info *i = irq_lists + mtpt->port.irq; + int ret, irq_flags = mtpt->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&mtpt->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&mtpt->list); + i->head = &mtpt->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(mtpt->port.irq, multi_interrupt, + irq_flags, "serial", i); + if (ret < 0) + serial_do_unlink(i, mtpt); + } + + return ret; +} + + + + +static void serial_unlink_irq_chain(struct mp_port *mtpt) +{ + struct irq_info *i = irq_lists + mtpt->port.irq; + + if (list_empty(i->head)) + { + free_irq(mtpt->port.irq, i); + } + serial_do_unlink(i, mtpt); +} + +static void multi_timeout(unsigned long data) +{ + struct mp_port *mtpt = (struct mp_port *)data; + + + spin_lock(&mtpt->port.lock); + multi_handle_port(mtpt); + spin_unlock(&mtpt->port.lock); + + mod_timer(&mtpt->timer, jiffies+1 ); +} + +static unsigned int multi_tx_empty(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&mtpt->port.lock, flags); + ret = serial_in(mtpt, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&mtpt->port.lock, flags); + + return ret; +} + + +static unsigned int multi_get_mctrl(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + unsigned char status; + unsigned int ret; + + status = serial_in(mtpt, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void multi_set_mctrl(struct sb_uart_port *port, unsigned int mctrl) +{ + struct mp_port *mtpt = (struct mp_port *)port; + unsigned char mcr = 0; + + mctrl &= 0xff; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + + serial_out(mtpt, UART_MCR, mcr); +} + + +static void multi_break_ctl(struct sb_uart_port *port, int break_state) +{ + struct mp_port *mtpt = (struct mp_port *)port; + unsigned long flags; + + spin_lock_irqsave(&mtpt->port.lock, flags); + if (break_state == -1) + mtpt->lcr |= UART_LCR_SBC; + else + mtpt->lcr &= ~UART_LCR_SBC; + serial_out(mtpt, UART_LCR, mtpt->lcr); + spin_unlock_irqrestore(&mtpt->port.lock, flags); +} + + + +static int multi_startup(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + unsigned long flags; + int retval; + + mtpt->capabilities = uart_config[mtpt->port.type].flags; + mtpt->mcr = 0; + + if (mtpt->capabilities & UART_CLEAR_FIFO) { + serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(mtpt, UART_FCR, 0); + } + + (void) serial_inp(mtpt, UART_LSR); + (void) serial_inp(mtpt, UART_RX); + (void) serial_inp(mtpt, UART_IIR); + (void) serial_inp(mtpt, UART_MSR); + //test-wlee 9-bit disable + serial_outp(mtpt, UART_MSR, 0); + + + if (!(mtpt->port.flags & UPF_BUGGY_UART) && + (serial_inp(mtpt, UART_LSR) == 0xff)) { + printk("ttyS%d: LSR safety check engaged!\n", mtpt->port.line); + //return -ENODEV; + } + + if ((!is_real_interrupt(mtpt->port.irq)) || (mtpt->poll_type==TYPE_POLL)) { + unsigned int timeout = mtpt->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + mtpt->timer.data = (unsigned long)mtpt; + mod_timer(&mtpt->timer, jiffies + timeout); + } + else + { + retval = serial_link_irq_chain(mtpt); + if (retval) + return retval; + } + + serial_outp(mtpt, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&mtpt->port.lock, flags); + if ((is_real_interrupt(mtpt->port.irq))||(mtpt->poll_type==TYPE_INTERRUPT)) + mtpt->port.mctrl |= TIOCM_OUT2; + + multi_set_mctrl(&mtpt->port, mtpt->port.mctrl); + spin_unlock_irqrestore(&mtpt->port.lock, flags); + + + mtpt->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(mtpt, UART_IER, mtpt->ier); + + (void) serial_inp(mtpt, UART_LSR); + (void) serial_inp(mtpt, UART_RX); + (void) serial_inp(mtpt, UART_IIR); + (void) serial_inp(mtpt, UART_MSR); + + return 0; +} + + + +static void multi_shutdown(struct sb_uart_port *port) +{ + struct mp_port *mtpt = (struct mp_port *)port; + unsigned long flags; + + + mtpt->ier = 0; + serial_outp(mtpt, UART_IER, 0); + + spin_lock_irqsave(&mtpt->port.lock, flags); + mtpt->port.mctrl &= ~TIOCM_OUT2; + + multi_set_mctrl(&mtpt->port, mtpt->port.mctrl); + spin_unlock_irqrestore(&mtpt->port.lock, flags); + + serial_out(mtpt, UART_LCR, serial_inp(mtpt, UART_LCR) & ~UART_LCR_SBC); + serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_outp(mtpt, UART_FCR, 0); + + + (void) serial_in(mtpt, UART_RX); + + if ((!is_real_interrupt(mtpt->port.irq))||(mtpt->poll_type==TYPE_POLL)) + { + del_timer_sync(&mtpt->timer); + } + else + { + serial_unlink_irq_chain(mtpt); + } +} + + + +static unsigned int multi_get_divisor(struct sb_uart_port *port, unsigned int baud) +{ + unsigned int quot; + + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else + quot = sb_uart_get_divisor(port, baud); + + return quot; +} + + + + +static void multi_set_termios(struct sb_uart_port *port, struct MP_TERMIOS *termios, struct MP_TERMIOS *old) +{ + struct mp_port *mtpt = (struct mp_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= 0x04; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + baud = sb_uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = multi_get_divisor(port, baud); + + if (mtpt->capabilities & UART_USE_FIFO) { + //if (baud < 2400) + // fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; + //else + // fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; + + // fcr = UART_FCR_ENABLE_FIFO | 0x90; + fcr = fcr_arr[mtpt->port.line]; + } + + spin_lock_irqsave(&mtpt->port.lock, flags); + + sb_uart_update_timeout(port, termios->c_cflag, baud); + + mtpt->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + mtpt->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + mtpt->port.read_status_mask |= UART_LSR_BI; + + mtpt->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + mtpt->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + mtpt->port.ignore_status_mask |= UART_LSR_BI; + if (termios->c_iflag & IGNPAR) + mtpt->port.ignore_status_mask |= UART_LSR_OE; + } + + if ((termios->c_cflag & CREAD) == 0) + mtpt->port.ignore_status_mask |= UART_LSR_DR; + + mtpt->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&mtpt->port, termios->c_cflag)) + mtpt->ier |= UART_IER_MSI; + + serial_out(mtpt, UART_IER, mtpt->ier); + + if (mtpt->capabilities & UART_STARTECH) { + serial_outp(mtpt, UART_LCR, 0xBF); + serial_outp(mtpt, UART_EFR, + termios->c_cflag & CRTSCTS ? UART_EFR_CTS :0); + } + + serial_outp(mtpt, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + + serial_outp(mtpt, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_outp(mtpt, UART_DLM, quot >> 8); /* MS of divisor */ + + serial_outp(mtpt, UART_LCR, cval); /* reset DLAB */ + mtpt->lcr = cval; /* Save LCR */ + + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO); + } + + serial_outp(mtpt, UART_FCR, fcr); /* set fcr */ + + + if ((mtpt->port.type == PORT_16C105X) + || (mtpt->port.type == PORT_16C105XA)) + { + if(deep[mtpt->port.line]!=0) + set_deep_fifo(port, ENABLE); + + if (mtpt->interface != RS232) + set_auto_rts(port,mtpt->interface); + + } + else + { + if (mtpt->interface >= RS485NE) + { + uart_clear_mctrl(&mtpt->port, TIOCM_RTS); + } + } + + if(mtpt->device->device_id == PCI_DEVICE_ID_MP4M) + { + SendATCommand(mtpt); + printk("SendATCommand\n"); + } + multi_set_mctrl(&mtpt->port, mtpt->port.mctrl); + spin_unlock_irqrestore(&mtpt->port.lock, flags); +} + +static void multi_pm(struct sb_uart_port *port, unsigned int state, unsigned int oldstate) +{ + struct mp_port *mtpt = (struct mp_port *)port; + if (state) { + if (mtpt->capabilities & UART_STARTECH) { + serial_outp(mtpt, UART_LCR, 0xBF); + serial_outp(mtpt, UART_EFR, UART_EFR_ECB); + serial_outp(mtpt, UART_LCR, 0); + serial_outp(mtpt, UART_IER, UART_IERX_SLEEP); + serial_outp(mtpt, UART_LCR, 0xBF); + serial_outp(mtpt, UART_EFR, 0); + serial_outp(mtpt, UART_LCR, 0); + } + + if (mtpt->pm) + mtpt->pm(port, state, oldstate); + } + else + { + if (mtpt->capabilities & UART_STARTECH) { + serial_outp(mtpt, UART_LCR, 0xBF); + serial_outp(mtpt, UART_EFR, UART_EFR_ECB); + serial_outp(mtpt, UART_LCR, 0); + serial_outp(mtpt, UART_IER, 0); + serial_outp(mtpt, UART_LCR, 0xBF); + serial_outp(mtpt, UART_EFR, 0); + serial_outp(mtpt, UART_LCR, 0); + } + + if (mtpt->pm) + mtpt->pm(port, state, oldstate); + } +} + +static void multi_release_std_resource(struct mp_port *mtpt) +{ + unsigned int size = 8 << mtpt->port.regshift; + + switch (mtpt->port.iotype) { + case UPIO_MEM: + if (!mtpt->port.mapbase) + break; + + if (mtpt->port.flags & UPF_IOREMAP) { + iounmap(mtpt->port.membase); + mtpt->port.membase = NULL; + } + + release_mem_region(mtpt->port.mapbase, size); + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(mtpt->port.iobase,size); + break; + } +} + +static void multi_release_port(struct sb_uart_port *port) +{ +} + +static int multi_request_port(struct sb_uart_port *port) +{ + return 0; +} + +static void multi_config_port(struct sb_uart_port *port, int flags) +{ + struct mp_port *mtpt = (struct mp_port *)port; + int probeflags = PROBE_ANY; + + if (flags & UART_CONFIG_TYPE) + autoconfig(mtpt, probeflags); + if (mtpt->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + autoconfig_irq(mtpt); + + if (mtpt->port.type == PORT_UNKNOWN) + multi_release_std_resource(mtpt); +} + +static int multi_verify_port(struct sb_uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= NR_IRQS || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char * multi_type(struct sb_uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct sb_uart_ops multi_pops = { + .tx_empty = multi_tx_empty, + .set_mctrl = multi_set_mctrl, + .get_mctrl = multi_get_mctrl, + .stop_tx = multi_stop_tx, + .start_tx = multi_start_tx, + .stop_rx = multi_stop_rx, + .enable_ms = multi_enable_ms, + .break_ctl = multi_break_ctl, + .startup = multi_startup, + .shutdown = multi_shutdown, + .set_termios = multi_set_termios, + .pm = multi_pm, + .type = multi_type, + .release_port = multi_release_port, + .request_port = multi_request_port, + .config_port = multi_config_port, + .verify_port = multi_verify_port, +}; + +static struct uart_driver multi_reg = { + .owner = THIS_MODULE, + .driver_name = "goldel_tulip", + .dev_name = "ttyMP", + .major = SB_TTY_MP_MAJOR, + .minor = 0, + .nr = MAX_MP_PORT, + .cons = NULL, +}; + +static void __init multi_init_ports(void) +{ + struct mp_port *mtpt; + static int first = 1; + int i,j,k; + unsigned char osc; + unsigned char b_ret = 0; + static struct mp_device_t * sbdev; + + if (!first) + return; + first = 0; + + mtpt = multi_ports; + + for (k=0;knr_ports; i++, mtpt++) + { + mtpt->device = sbdev; + mtpt->port.iobase = sbdev->uart_access_addr + 8*i; + mtpt->port.irq = sbdev->irq; + if ( ((sbdev->device_id == PCI_DEVICE_ID_MP4)&&(sbdev->revision==0x91))) + mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + i; + else if (sbdev->revision == 0xc0) + mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + (i & 0x1); + else + mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + i/8; + + mtpt->option_base_addr = sbdev->option_reg_addr; + + mtpt->poll_type = sbdev->poll_type; + + mtpt->port.uartclk = BASE_BAUD * 16; + + /* get input clock infomation */ + osc = inb(sbdev->option_reg_addr + MP_OPTR_DIR0 + i/8) & 0x0F; + if (osc==0x0f) + osc = 0; + for(j=0;jport.uartclk *= 2; + mtpt->port.flags |= STD_COM_FLAGS | UPF_SHARE_IRQ ; + mtpt->port.iotype = UPIO_PORT; + mtpt->port.ops = &multi_pops; + + if (sbdev->revision == 0xc0) + { + /* for SB16C1053APCI */ + b_ret = sb1053a_get_interface(mtpt, i); + } + else + { + b_ret = read_option_register(mtpt,(MP_OPTR_IIR0 + i/8)); + printk("IIR_RET = %x\n",b_ret); + } + + if(IIR_RS232 == (b_ret & IIR_RS232)) + { + mtpt->interface = RS232; + } + if(IIR_RS422 == (b_ret & IIR_RS422)) + { + mtpt->interface = RS422PTP; + } + if(IIR_RS485 == (b_ret & IIR_RS485)) + { + mtpt->interface = RS485NE; + } + } + } +} + +static void __init multi_register_ports(struct uart_driver *drv) +{ + int i; + + multi_init_ports(); + + for (i = 0; i < NR_PORTS; i++) { + struct mp_port *mtpt = &multi_ports[i]; + + mtpt->port.line = i; + mtpt->port.ops = &multi_pops; + init_timer(&mtpt->timer); + mtpt->timer.function = multi_timeout; + mp_add_one_port(drv, &mtpt->port); + } +} + +/** + * pci_remap_base - remap BAR value of pci device + * + * PARAMETERS + * pcidev - pci_dev structure address + * offset - BAR offset PCI_BASE_ADDRESS_0 ~ PCI_BASE_ADDRESS_4 + * address - address to be changed BAR value + * size - size of address space + * + * RETURNS + * If this function performs successful, it returns 0. Otherwise, It returns -1. + */ +static int pci_remap_base(struct pci_dev *pcidev, unsigned int offset, + unsigned int address, unsigned int size) +{ +#if 0 + struct resource *root; + unsigned index = (offset - 0x10) >> 2; +#endif + + pci_write_config_dword(pcidev, offset, address); +#if 0 + root = pcidev->resource[index].parent; + release_resource(&pcidev->resource[index]); + address &= ~0x1; + pcidev->resource[index].start = address; + pcidev->resource[index].end = address + size - 1; + + if (request_resource(root, &pcidev->resource[index]) != NULL) + { + printk(KERN_ERR "pci remap conflict!! 0x%x\n", address); + return (-1); + } +#endif + + return (0); +} + +static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd) +{ + static struct mp_device_t * sbdev = mp_devs; + unsigned long addr = 0; + int j; + struct resource * ret = NULL; + + sbdev->device_id = brd.device_id; + pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &(sbdev->revision)); + sbdev->name = brd.name; + sbdev->uart_access_addr = pcidev->resource[0].start & PCI_BASE_ADDRESS_IO_MASK; + + /* check revision. The SB16C1053APCI's option i/o address is BAR4 */ + if (sbdev->revision == 0xc0) + { + /* SB16C1053APCI */ + sbdev->option_reg_addr = pcidev->resource[4].start & PCI_BASE_ADDRESS_IO_MASK; + } + else + { + sbdev->option_reg_addr = pcidev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK; + } +#if 1 + if (sbdev->revision == 0xc0) + { + outb(0x00, sbdev->option_reg_addr + MP_OPTR_GPOCR); + inb(sbdev->option_reg_addr + MP_OPTR_GPOCR); + outb(0x83, sbdev->option_reg_addr + MP_OPTR_GPOCR); + } +#endif + + sbdev->irq = pcidev->irq; + + if ((brd.device_id & 0x0800) || !(brd.device_id &0xff00)) + { + sbdev->poll_type = TYPE_INTERRUPT; + } + else + { + sbdev->poll_type = TYPE_POLL; + } + + /* codes which is specific to each board*/ + switch(brd.device_id){ + case PCI_DEVICE_ID_MP1 : + case PCIE_DEVICE_ID_MP1 : + case PCIE_DEVICE_ID_MP1E : + case PCIE_DEVICE_ID_GT_MP1 : + sbdev->nr_ports = 1; + break; + case PCI_DEVICE_ID_MP2 : + case PCIE_DEVICE_ID_MP2 : + case PCIE_DEVICE_ID_GT_MP2 : + case PCIE_DEVICE_ID_MP2B : + case PCIE_DEVICE_ID_MP2E : + sbdev->nr_ports = 2; + + /* serial base address remap */ + if (sbdev->revision == 0xc0) + { + int prev_port_addr = 0; + + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8); + } + break; + case PCI_DEVICE_ID_MP4 : + case PCI_DEVICE_ID_MP4A : + case PCIE_DEVICE_ID_MP4 : + case PCI_DEVICE_ID_GT_MP4 : + case PCI_DEVICE_ID_GT_MP4A : + case PCIE_DEVICE_ID_GT_MP4 : + case PCI_DEVICE_ID_MP4M : + case PCIE_DEVICE_ID_MP4B : + sbdev->nr_ports = 4; + + if(sbdev->revision == 0x91){ + sbdev->reserved_addr[0] = pcidev->resource[0].start & PCI_BASE_ADDRESS_IO_MASK; + outb(0x03 , sbdev->reserved_addr[0] + 0x01); + outb(0x03 , sbdev->reserved_addr[0] + 0x02); + outb(0x01 , sbdev->reserved_addr[0] + 0x20); + outb(0x00 , sbdev->reserved_addr[0] + 0x21); + request_region(sbdev->reserved_addr[0], 32, sbdev->name); + sbdev->uart_access_addr = pcidev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK; + sbdev->option_reg_addr = pcidev->resource[2].start & PCI_BASE_ADDRESS_IO_MASK; + } + + /* SB16C1053APCI */ + if (sbdev->revision == 0xc0) + { + int prev_port_addr = 0; + + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_2, prev_port_addr + 16, 8); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_3, prev_port_addr + 24, 8); + } + break; + case PCI_DEVICE_ID_MP6 : + case PCI_DEVICE_ID_MP6A : + case PCI_DEVICE_ID_GT_MP6 : + case PCI_DEVICE_ID_GT_MP6A : + sbdev->nr_ports = 6; + + /* SB16C1053APCI */ + if (sbdev->revision == 0xc0) + { + int prev_port_addr = 0; + + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_2, prev_port_addr + 16, 16); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_3, prev_port_addr + 32, 16); + } + break; + case PCI_DEVICE_ID_MP8 : + case PCIE_DEVICE_ID_MP8 : + case PCI_DEVICE_ID_GT_MP8 : + case PCIE_DEVICE_ID_GT_MP8 : + case PCIE_DEVICE_ID_MP8B : + sbdev->nr_ports = 8; + break; + case PCI_DEVICE_ID_MP32 : + case PCIE_DEVICE_ID_MP32 : + case PCI_DEVICE_ID_GT_MP32 : + case PCIE_DEVICE_ID_GT_MP32 : + { + int portnum_hex=0; + portnum_hex = inb(sbdev->option_reg_addr); + sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16); + } + break; + case PCI_DEVICE_ID_MP2S1P : + sbdev->nr_ports = 2; + + /* SB16C1053APCI */ + if (sbdev->revision == 0xc0) + { + int prev_port_addr = 0; + + pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr); + pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8); + } + + /* add PC compatible parallel port */ + parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0); + break; + case PCI_DEVICE_ID_MP1P : + /* add PC compatible parallel port */ + parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0); + break; + } + + ret = request_region(sbdev->uart_access_addr, (8*sbdev->nr_ports), sbdev->name); + + if (sbdev->revision == 0xc0) + { + ret = request_region(sbdev->option_reg_addr, 0x40, sbdev->name); + } + else + { + ret = request_region(sbdev->option_reg_addr, 0x20, sbdev->name); + } + + + NR_BOARD++; + NR_PORTS += sbdev->nr_ports; + + /* Enable PCI interrupt */ + addr = sbdev->option_reg_addr + MP_OPTR_IMR0; + for(j=0; j < (sbdev->nr_ports/8)+1; j++) + { + if (sbdev->poll_type == TYPE_INTERRUPT) + { + outb(0xff,addr +j); + } + } + sbdev++; + + return 0; +} + +static int __init multi_init(void) +{ + int ret, i; + struct pci_dev *dev = NULL; + + if(fcr_count==0) + { + for(i=0;i<256;i++) + { + fcr_arr[i] = 0x01; + + } + } + if(deep_count==0) + { + for(i=0;i<256;i++) + { + deep[i] = 1; + + } + } + if(rtr_count==0) + { + for(i=0;i<256;i++) + { + rtr[i] = 0x10; + } + } + if(ttr_count==0) + { + for(i=0;i<256;i++) + { + ttr[i] = 0x38; + } + } + + +printk("MULTI INIT\n"); + for( i=0; i< mp_nrpcibrds; i++) + { + + while( (dev = pci_get_device(mp_pciboards[i].vendor_id, mp_pciboards[i].device_id, dev) ) ) + + { +printk("FOUND~~~\n"); +// Cent OS bug fix +// if (mp_pciboards[i].device_id & 0x0800) + { + int status; + pci_disable_device(dev); + status = pci_enable_device(dev); + + if (status != 0) + { + printk("Multiport Board Enable Fail !\n\n"); + status = -ENXIO; + return status; + } + } + + init_mp_dev(dev, mp_pciboards[i]); + } + } + + for (i = 0; i < NR_IRQS; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = mp_register_driver(&multi_reg); + + if (ret >= 0) + multi_register_ports(&multi_reg); + + return ret; +} + +static void __exit multi_exit(void) +{ + int i; + + for (i = 0; i < NR_PORTS; i++) + mp_remove_one_port(&multi_reg, &multi_ports[i].port); + + mp_unregister_driver(&multi_reg); +} + +module_init(multi_init); +module_exit(multi_exit); + +MODULE_DESCRIPTION("SystemBase Multiport PCI/PCIe CORE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/sb105x/sb_pci_mp.h b/drivers/staging/sb105x/sb_pci_mp.h new file mode 100644 index 000000000000..f33efde07b97 --- /dev/null +++ b/drivers/staging/sb105x/sb_pci_mp.h @@ -0,0 +1,293 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +#include +#include +#include + + +#define MP_TERMIOS ktermios + +#include "sb_mp_register.h" +#include "sb_ser_core.h" + +#define DRIVER_VERSION "1.1" +#define DRIVER_DATE "2012/01/05" +#define DRIVER_AUTHOR "SYSTEMBASE" +#define DRIVER_DESC "SystemBase PCI/PCIe Multiport Core" + +#define SB_TTY_MP_MAJOR 54 +#define PCI_VENDOR_ID_MULTIPORT 0x14A1 + +#define PCI_DEVICE_ID_MP1 0x4d01 +#define PCI_DEVICE_ID_MP2 0x4d02 +#define PCI_DEVICE_ID_MP4 0x4d04 +#define PCI_DEVICE_ID_MP4A 0x4d54 +#define PCI_DEVICE_ID_MP6 0x4d06 +#define PCI_DEVICE_ID_MP6A 0x4d56 +#define PCI_DEVICE_ID_MP8 0x4d08 +#define PCI_DEVICE_ID_MP32 0x4d32 +/* Parallel port */ +#define PCI_DEVICE_ID_MP1P 0x4301 +#define PCI_DEVICE_ID_MP2S1P 0x4303 + +#define PCIE_DEVICE_ID_MP1 0x4501 +#define PCIE_DEVICE_ID_MP2 0x4502 +#define PCIE_DEVICE_ID_MP4 0x4504 +#define PCIE_DEVICE_ID_MP8 0x4508 +#define PCIE_DEVICE_ID_MP32 0x4532 + +#define PCIE_DEVICE_ID_MP1E 0x4e01 +#define PCIE_DEVICE_ID_MP2E 0x4e02 +#define PCIE_DEVICE_ID_MP2B 0x4b02 +#define PCIE_DEVICE_ID_MP4B 0x4b04 +#define PCIE_DEVICE_ID_MP8B 0x4b08 + +#define PCI_DEVICE_ID_GT_MP4 0x0004 +#define PCI_DEVICE_ID_GT_MP4A 0x0054 +#define PCI_DEVICE_ID_GT_MP6 0x0006 +#define PCI_DEVICE_ID_GT_MP6A 0x0056 +#define PCI_DEVICE_ID_GT_MP8 0x0008 +#define PCI_DEVICE_ID_GT_MP32 0x0032 + +#define PCIE_DEVICE_ID_GT_MP1 0x1501 +#define PCIE_DEVICE_ID_GT_MP2 0x1502 +#define PCIE_DEVICE_ID_GT_MP4 0x1504 +#define PCIE_DEVICE_ID_GT_MP8 0x1508 +#define PCIE_DEVICE_ID_GT_MP32 0x1532 + +#define PCI_DEVICE_ID_MP4M 0x4604 //modem + +#define MAX_MP_DEV 8 +#define BD_MAX_PORT 32 /* Max serial port in one board */ +#define MAX_MP_PORT 256 /* Max serial port in one PC */ + +#define PORT_16C105XA 3 +#define PORT_16C105X 2 +#define PORT_16C55X 1 + +#define ENABLE 1 +#define DISABLE 0 + +/* ioctls */ +#define TIOCGNUMOFPORT 0x545F +#define TIOCSMULTIECHO 0x5440 +#define TIOCSPTPNOECHO 0x5441 + +#define TIOCGOPTIONREG 0x5461 +#define TIOCGDISABLEIRQ 0x5462 +#define TIOCGENABLEIRQ 0x5463 +#define TIOCGSOFTRESET 0x5464 +#define TIOCGSOFTRESETR 0x5465 +#define TIOCGREGINFO 0x5466 +#define TIOCGGETLSR 0x5467 +#define TIOCGGETDEVID 0x5468 +#define TIOCGGETBDNO 0x5469 +#define TIOCGGETINTERFACE 0x546A +#define TIOCGGETREV 0x546B +#define TIOCGGETNRPORTS 0x546C +#define TIOCGGETPORTTYPE 0x546D +#define GETDEEPFIFO 0x54AA +#define SETDEEPFIFO 0x54AB +#define SETFCR 0x54BA +#define SETTTR 0x54B1 +#define SETRTR 0x54B2 +#define GETTTR 0x54B3 +#define GETRTR 0x54B4 + +/* multi-drop mode related ioctl commands */ +#define TIOCSMULTIDROP 0x5470 +#define TIOCSMDADDR 0x5471 +#define TIOCGMDADDR 0x5472 +#define TIOCSENDADDR 0x5473 + + +/* serial interface */ +#define RS232 1 +#define RS422PTP 2 +#define RS422MD 3 +#define RS485NE 4 +#define RS485ECHO 5 + +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + +#define PASS_LIMIT 256 +#define is_real_interrupt(irq) ((irq) != 0) + +#define PROBE_ANY (~0) + +static DEFINE_MUTEX(mp_mutex); +#define MP_MUTEX_LOCK(x) mutex_lock(&(x)) +#define MP_MUTEX_UNLOCK(x) mutex_unlock(&(x)) +#define MP_STATE_LOCK(x) mutex_lock(&((x)->mutex)) +#define MP_STATE_UNLOCK(x) mutex_unlock(&((x)->mutex)) + + +#define UART_LSR_SPECIAL 0x1E + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) +#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->blocked_open : 0)) + + +//#define MP_DEBUG 1 +#undef MP_DEBUG + +#ifdef MP_DEBUG +#define DPRINTK(x...) printk(x) +#else +#define DPRINTK(x...) do { } while (0) +#endif + +#ifdef MP_DEBUG +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#ifdef MP_DEBUG +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486)) +#define SERIAL_INLINE +#endif +#ifdef SERIAL_INLINE +#define _INLINE_ inline +#else +#define _INLINE_ +#endif + +#define TYPE_POLL 1 +#define TYPE_INTERRUPT 2 + + +struct mp_device_t { + unsigned short device_id; + unsigned char revision; + char *name; + unsigned long uart_access_addr; + unsigned long option_reg_addr; + unsigned long reserved_addr[4]; + int irq; + int nr_ports; + int poll_type; +}; + +typedef struct mppcibrd { + char *name; + unsigned short vendor_id; + unsigned short device_id; +} mppcibrd_t; + +static mppcibrd_t mp_pciboards[] = { + + { "Multi-1 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP1} , + { "Multi-2 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP2} , + { "Multi-4 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4} , + { "Multi-4 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4A} , + { "Multi-6 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP6} , + { "Multi-6 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP6A} , + { "Multi-8 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP8} , + { "Multi-32 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP32} , + + { "Multi-1P PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP1P} , + { "Multi-2S1P PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP2S1P} , + + { "Multi-4(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP4} , + { "Multi-4(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP4A} , + { "Multi-6(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP6} , + { "Multi-6(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP6A} , + { "Multi-8(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP8} , + { "Multi-32(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP32} , + + { "Multi-1 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP1} , + { "Multi-2 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2} , + { "Multi-4 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP4} , + { "Multi-8 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP8} , + { "Multi-32 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP32} , + + { "Multi-1 PCIe E", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP1E} , + { "Multi-2 PCIe E", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2E} , + { "Multi-2 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2B} , + { "Multi-4 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP4B} , + { "Multi-8 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP8B} , + + { "Multi-1(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP1} , + { "Multi-2(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP2} , + { "Multi-4(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP4} , + { "Multi-8(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP8} , + { "Multi-32(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP32} , + + { "Multi-4M PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4M} , +}; + +struct mp_port { + struct sb_uart_port port; + + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned int capabilities; /* port capabilities */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + void (*pm)(struct sb_uart_port *port, + unsigned int state, unsigned int old); + struct mp_device_t *device; + unsigned long interface_config_addr; + unsigned long option_base_addr; + unsigned char interface; + unsigned char poll_type; +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +struct sb105x_uart_config { + char *name; + int dfl_xmit_fifo_size; + int flags; +}; + +static const struct sb105x_uart_config uart_config[] = { + { "unknown", 1, 0 }, + { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "SB16C1050", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "SB16C1050A", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, +}; + + + diff --git a/drivers/staging/sb105x/sb_ser_core.h b/drivers/staging/sb105x/sb_ser_core.h new file mode 100644 index 000000000000..c8fb99173299 --- /dev/null +++ b/drivers/staging/sb105x/sb_ser_core.h @@ -0,0 +1,368 @@ +#include + +#define UART_CONFIG_TYPE (1 << 0) +#define UART_CONFIG_IRQ (1 << 1) +#define UPIO_PORT (0) +#define UPIO_HUB6 (1) +#define UPIO_MEM (2) +#define UPIO_MEM32 (3) +#define UPIO_AU (4) /* Au1x00 type IO */ +#define UPIO_TSI (5) /* Tsi108/109 type IO */ +#define UPF_FOURPORT (1 << 1) +#define UPF_SAK (1 << 2) +#define UPF_SPD_MASK (0x1030) +#define UPF_SPD_HI (0x0010) +#define UPF_SPD_VHI (0x0020) +#define UPF_SPD_CUST (0x0030) +#define UPF_SPD_SHI (0x1000) +#define UPF_SPD_WARP (0x1010) +#define UPF_SKIP_TEST (1 << 6) +#define UPF_AUTO_IRQ (1 << 7) +#define UPF_HARDPPS_CD (1 << 11) +#define UPF_LOW_LATENCY (1 << 13) +#define UPF_BUGGY_UART (1 << 14) +#define UPF_MAGIC_MULTIPLIER (1 << 16) +#define UPF_CONS_FLOW (1 << 23) +#define UPF_SHARE_IRQ (1 << 24) +#define UPF_BOOT_AUTOCONF (1 << 28) +#define UPF_DEAD (1 << 30) +#define UPF_IOREMAP (1 << 31) +#define UPF_CHANGE_MASK (0x17fff) +#define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY) +#define USF_CLOSING_WAIT_INF (0) +#define USF_CLOSING_WAIT_NONE (~0U) + +#define UART_XMIT_SIZE PAGE_SIZE + +#define UIF_CHECK_CD (1 << 25) +#define UIF_CTS_FLOW (1 << 26) +#define UIF_NORMAL_ACTIVE (1 << 29) +#define UIF_INITIALIZED (1 << 31) +#define UIF_SUSPENDED (1 << 30) + +#define WAKEUP_CHARS 256 + +#define uart_circ_empty(circ) ((circ)->head == (circ)->tail) +#define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0) + +#define uart_circ_chars_pending(circ) \ + (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE)) + +#define uart_circ_chars_free(circ) \ + (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE)) + +#define uart_tx_stopped(port) \ + ((port)->info->tty->stopped || (port)->info->tty->hw_stopped) + +#define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \ + (cflag) & CRTSCTS || \ + !((cflag) & CLOCAL)) + + +struct sb_uart_port; +struct sb_uart_info; +struct serial_struct; +struct device; + +struct sb_uart_ops { + unsigned int (*tx_empty)(struct sb_uart_port *); + void (*set_mctrl)(struct sb_uart_port *, unsigned int mctrl); + unsigned int (*get_mctrl)(struct sb_uart_port *); + void (*stop_tx)(struct sb_uart_port *); + void (*start_tx)(struct sb_uart_port *); + void (*send_xchar)(struct sb_uart_port *, char ch); + void (*stop_rx)(struct sb_uart_port *); + void (*enable_ms)(struct sb_uart_port *); + void (*break_ctl)(struct sb_uart_port *, int ctl); + int (*startup)(struct sb_uart_port *); + void (*shutdown)(struct sb_uart_port *); + void (*set_termios)(struct sb_uart_port *, struct MP_TERMIOS *new, + struct MP_TERMIOS *old); + void (*pm)(struct sb_uart_port *, unsigned int state, + unsigned int oldstate); + int (*set_wake)(struct sb_uart_port *, unsigned int state); + + const char *(*type)(struct sb_uart_port *); + + void (*release_port)(struct sb_uart_port *); + + int (*request_port)(struct sb_uart_port *); + void (*config_port)(struct sb_uart_port *, int); + int (*verify_port)(struct sb_uart_port *, struct serial_struct *); + int (*ioctl)(struct sb_uart_port *, unsigned int, unsigned long); +}; + + +struct sb_uart_icount { + __u32 cts; + __u32 dsr; + __u32 rng; + __u32 dcd; + __u32 rx; + __u32 tx; + __u32 frame; + __u32 overrun; + __u32 parity; + __u32 brk; + __u32 buf_overrun; +}; +typedef unsigned int upf_t; + +struct sb_uart_port { + spinlock_t lock; /* port lock */ + unsigned int iobase; /* in/out[bwl] */ + unsigned char __iomem *membase; /* read/write[bwl] */ + unsigned int irq; /* irq number */ + unsigned int uartclk; /* base uart clock */ + unsigned int fifosize; /* tx fifo size */ + unsigned char x_char; /* xon/xoff char */ + unsigned char regshift; /* reg offset shift */ + unsigned char iotype; /* io access style */ + unsigned char unused1; + + + unsigned int read_status_mask; /* driver specific */ + unsigned int ignore_status_mask; /* driver specific */ + struct sb_uart_info *info; /* pointer to parent info */ + struct sb_uart_icount icount; /* statistics */ + + struct console *cons; /* struct console, if any */ +#ifdef CONFIG_SERIAL_CORE_CONSOLE + unsigned long sysrq; /* sysrq timeout */ +#endif + + upf_t flags; + + unsigned int mctrl; /* current modem ctrl settings */ + unsigned int timeout; /* character-based timeout */ + unsigned int type; /* port type */ + const struct sb_uart_ops *ops; + unsigned int custom_divisor; + unsigned int line; /* port index */ + unsigned long mapbase; /* for ioremap */ + struct device *dev; /* parent device */ + unsigned char hub6; /* this should be in the 8250 driver */ + unsigned char unused[3]; +}; + +#define mdmode unused[2] +#define MDMODE_ADDR 0x1 +#define MDMODE_ENABLE 0x2 +#define MDMODE_AUTO 0x4 +#define MDMODE_ADDRSEND 0x8 + +struct sb_uart_state { + unsigned int close_delay; /* msec */ + unsigned int closing_wait; /* msec */ + + + int count; + int pm_state; + struct sb_uart_info *info; + struct sb_uart_port *port; + + struct mutex mutex; +}; + +typedef unsigned int uif_t; + +struct sb_uart_info { + struct tty_struct *tty; + struct circ_buf xmit; + uif_t flags; + + int blocked_open; + + struct tasklet_struct tlet; + + wait_queue_head_t open_wait; + wait_queue_head_t delta_msr_wait; +}; + + +struct module; +struct tty_driver; + +struct uart_driver { + struct module *owner; + const char *driver_name; + const char *dev_name; + int major; + int minor; + int nr; + struct console *cons; + + struct sb_uart_state *state; + struct tty_driver *tty_driver; +}; + +void sb_uart_write_wakeup(struct sb_uart_port *port) +{ + struct sb_uart_info *info = port->info; + tasklet_schedule(&info->tlet); +} + +void sb_uart_update_timeout(struct sb_uart_port *port, unsigned int cflag, + unsigned int baud) +{ + unsigned int bits; + + switch (cflag & CSIZE) + { + case CS5: + bits = 7; + break; + + case CS6: + bits = 8; + break; + + case CS7: + bits = 9; + break; + + default: + bits = 10; + break; + } + + if (cflag & CSTOPB) + { + bits++; + } + + if (cflag & PARENB) + { + bits++; + } + + bits = bits * port->fifosize; + + port->timeout = (HZ * bits) / baud + HZ/50; +} +unsigned int sb_uart_get_baud_rate(struct sb_uart_port *port, struct MP_TERMIOS *termios, + struct MP_TERMIOS *old, unsigned int min, + unsigned int max) +{ + unsigned int try, baud, altbaud = 38400; + upf_t flags = port->flags & UPF_SPD_MASK; + + if (flags == UPF_SPD_HI) + altbaud = 57600; + if (flags == UPF_SPD_VHI) + altbaud = 115200; + if (flags == UPF_SPD_SHI) + altbaud = 230400; + if (flags == UPF_SPD_WARP) + altbaud = 460800; + + for (try = 0; try < 2; try++) { + + switch (termios->c_cflag & (CBAUD | CBAUDEX)) + { + case B921600 : baud = 921600; break; + case B460800 : baud = 460800; break; + case B230400 : baud = 230400; break; + case B115200 : baud = 115200; break; + case B57600 : baud = 57600; break; + case B38400 : baud = 38400; break; + case B19200 : baud = 19200; break; + case B9600 : baud = 9600; break; + case B4800 : baud = 4800; break; + case B2400 : baud = 2400; break; + case B1800 : baud = 1800; break; + case B1200 : baud = 1200; break; + case B600 : baud = 600; break; + case B300 : baud = 300; break; + case B200 : baud = 200; break; + case B150 : baud = 150; break; + case B134 : baud = 134; break; + case B110 : baud = 110; break; + case B75 : baud = 75; break; + case B50 : baud = 50; break; + default : baud = 9600; break; + } + + if (baud == 38400) + baud = altbaud; + + if (baud == 0) + baud = 9600; + + if (baud >= min && baud <= max) + return baud; + + termios->c_cflag &= ~CBAUD; + if (old) { + termios->c_cflag |= old->c_cflag & CBAUD; + old = NULL; + continue; + } + + termios->c_cflag |= B9600; + } + + return 0; +} +unsigned int sb_uart_get_divisor(struct sb_uart_port *port, unsigned int baud) +{ + unsigned int quot; + + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = (port->uartclk + (8 * baud)) / (16 * baud); + + return quot; +} + + + +static inline int sb_uart_handle_break(struct sb_uart_port *port) +{ + struct sb_uart_info *info = port->info; + + if (port->flags & UPF_SAK) + do_SAK(info->tty); + return 0; +} + +static inline void sb_uart_handle_dcd_change(struct sb_uart_port *port, unsigned int status) +{ + struct sb_uart_info *info = port->info; + + port->icount.dcd++; + + if (info->flags & UIF_CHECK_CD) { + if (status) + wake_up_interruptible(&info->open_wait); + else if (info->tty) + tty_hangup(info->tty); + } +} + +static inline void sb_uart_handle_cts_change(struct sb_uart_port *port, unsigned int status) +{ + struct sb_uart_info *info = port->info; + struct tty_struct *tty = info->tty; + + port->icount.cts++; + + if (info->flags & UIF_CTS_FLOW) { + if (tty->hw_stopped) { + if (status) { + tty->hw_stopped = 0; + port->ops->start_tx(port); + sb_uart_write_wakeup(port); + } + } else { + if (!status) { + tty->hw_stopped = 1; + port->ops->stop_tx(port); + } + } + } +} + + + -- 2.20.1