From 6819d57f07440a8f9540967d9212a70e9c98eceb Mon Sep 17 00:00:00 2001 From: Sujith <Sujith.Manoharan@atheros.com> Date: Fri, 16 Apr 2010 11:53:56 +0530 Subject: [PATCH] ath9k_hw: Relocate Opmode initialization Programming the opmode in the HW can be done before the assoc_id and STA_ID registers are setup. This helps ath9k_htc when multiple register writes are used. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- drivers/net/wireless/ath/ath9k/hw.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 894f5fc7489e..35fe58f5675b 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1238,6 +1238,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ath9k_hw_spur_mitigate_freq(ah, chan); ah->eep_ops->set_board_values(ah, chan); + ath9k_hw_set_operating_mode(ah, ah->opmode); + REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(common->macaddr)); REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(common->macaddr + 4) | macStaId1 @@ -1245,16 +1247,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, | (ah->config. ack_6mb ? AR_STA_ID1_ACKCTS_6MB : 0) | ah->sta_id1_defaults); - ath9k_hw_set_operating_mode(ah, ah->opmode); - ath_hw_setbssidmask(common); - REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna); - ath9k_hw_write_associd(ah); - REG_WRITE(ah, AR_ISR, ~0); - REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR); r = ath9k_hw_rf_set_freq(ah, chan); -- 2.20.1