From 66760169492445395c530c812443f58e2cfdb3dc Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Fri, 20 Feb 2009 14:02:31 +0200 Subject: [PATCH] USB: TWL: disable VUSB regulators when cable unplugged This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1 when the USB cable is unplugged to reduce power consumption. Added a depencency from twl4030 usb driver to TWL_REGULATOR. Signed-off-by: Jouni Hogander Signed-off-by: Kalle Jokiniemi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/Kconfig | 2 +- drivers/usb/otg/twl4030-usb.c | 73 ++++++++++++++++++++++++++++++----- 2 files changed, 65 insertions(+), 10 deletions(-) diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index fc1ca03ce4da..aa884d072f0b 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -43,7 +43,7 @@ config ISP1301_OMAP config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE + depends on TWL4030_CORE && REGULATOR_TWL4030 select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 416e4410be02..d9478d0e1c8b 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -34,6 +34,8 @@ #include #include #include +#include +#include /* Register defines */ @@ -246,6 +248,11 @@ struct twl4030_usb { struct otg_transceiver otg; struct device *dev; + /* TWL4030 internal USB regulator supplies */ + struct regulator *usb1v5; + struct regulator *usb1v8; + struct regulator *usb3v1; + /* for vbus reporting with irqs disabled */ spinlock_t lock; @@ -434,6 +441,18 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); if (on) { + regulator_enable(twl->usb3v1); + regulator_enable(twl->usb1v8); + /* + * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP + * in twl4030) resets the VUSB_DEDICATED2 register. This reset + * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to + * SLEEP. We work around this by clearing the bit after usv3v1 + * is re-activated. This ensures that VUSB3V1 is really active. + */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, + VUSB_DEDICATED2); + regulator_enable(twl->usb1v5); pwr &= ~PHY_PWR_PHYPWD; WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); twl4030_usb_write(twl, PHY_CLK_CTRL, @@ -443,6 +462,9 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) } else { pwr |= PHY_PWR_PHYPWD; WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + regulator_disable(twl->usb1v5); + regulator_disable(twl->usb1v8); + regulator_disable(twl->usb3v1); } } @@ -468,7 +490,7 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) twl->asleep = 0; } -static void twl4030_usb_ldo_init(struct twl4030_usb *twl) +static int twl4030_usb_ldo_init(struct twl4030_usb *twl) { /* Enable writing to power configuration registers */ twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); @@ -480,20 +502,45 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl) /* input to VUSB3V1 LDO is from VBAT, not VBUS */ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); - /* turn on 3.1V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB3V1_DEV_GRP); + /* Initialize 3.1V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + + twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); + if (IS_ERR(twl->usb3v1)) + return -ENODEV; + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); - /* turn on 1.5V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V5_DEV_GRP); + /* Initialize 1.5V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + + twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); + if (IS_ERR(twl->usb1v5)) + goto fail1; + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); - /* turn on 1.8V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V8_DEV_GRP); + /* Initialize 1.8V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + + twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); + if (IS_ERR(twl->usb1v8)) + goto fail2; + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); /* disable access to power configuration registers */ twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); + + return 0; + +fail2: + regulator_put(twl->usb1v5); + twl->usb1v5 = NULL; +fail1: + regulator_put(twl->usb3v1); + twl->usb3v1 = NULL; + return -ENODEV; } static ssize_t twl4030_usb_vbus_show(struct device *dev, @@ -598,7 +645,7 @@ static int __init twl4030_usb_probe(struct platform_device *pdev) { struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; - int status; + int status, err; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); @@ -622,7 +669,12 @@ static int __init twl4030_usb_probe(struct platform_device *pdev) /* init spinlock for workqueue */ spin_lock_init(&twl->lock); - twl4030_usb_ldo_init(twl); + err = twl4030_usb_ldo_init(twl); + if (err) { + dev_err(&pdev->dev, "ldo init failed\n"); + kfree(twl); + return err; + } otg_set_transceiver(&twl->otg); platform_set_drvdata(pdev, twl); @@ -688,6 +740,9 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); twl4030_phy_power(twl, 0); + regulator_put(twl->usb1v5); + regulator_put(twl->usb1v8); + regulator_put(twl->usb3v1); kfree(twl); -- 2.20.1