From 66213b3ccfc770704025ce9465fa3aaedde21b55 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sun, 4 Oct 2009 14:55:27 +0200 Subject: [PATCH] MIPS: PCMCIA: new socket driver for Au1000 demoboards. New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/platform.c | 6 - arch/mips/alchemy/common/setup.c | 3 +- arch/mips/include/asm/mach-au1x00/au1000.h | 14 + drivers/pcmcia/Kconfig | 11 + drivers/pcmcia/Makefile | 9 +- drivers/pcmcia/au1000_db1x00.c | 307 ---------- drivers/pcmcia/au1000_generic.h | 12 +- drivers/pcmcia/au1000_pb1x00.c | 119 +--- drivers/pcmcia/db1xxx_ss.c | 630 +++++++++++++++++++++ 9 files changed, 660 insertions(+), 451 deletions(-) delete mode 100644 drivers/pcmcia/au1000_db1x00.c create mode 100644 drivers/pcmcia/db1xxx_ss.c diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 117f99f7064..2b76a57c494 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -308,11 +308,6 @@ static struct platform_device au1200_mmc1_device = { #endif /* #ifndef CONFIG_MIPS_DB1200 */ #endif /* #ifdef CONFIG_SOC_AU1200 */ -static struct platform_device au1x00_pcmcia_device = { - .name = "au1x00-pcmcia", - .id = 0, -}; - /* All Alchemy demoboards with I2C have this #define in their headers */ #ifdef SMBUS_PSC_BASE static struct resource pbdb_smbus_resources[] = { @@ -334,7 +329,6 @@ static struct platform_device pbdb_smbus_device = { static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xx0_uart_device, &au1xxx_usb_ohci_device, - &au1x00_pcmcia_device, #ifdef CONFIG_FB_AU1100 &au1100_lcd_device, #endif diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 6184baa5678..375984e5c2e 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -107,7 +107,8 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) * The pseudo address we use is 0xF400 0000. Any address over * 0xF400 0000 is a PCMCIA pseudo address. */ - if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) + if ((phys_addr >= PCMCIA_ATTR_PSEUDO_PHYS) && + (phys_addr < PCMCIA_PSEUDO_END)) return (phys_t)(phys_addr << 4); /* default nop */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 05078224e93..fceeca88335 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -1724,6 +1724,20 @@ enum soc_au1200_ints { #endif +/* + * All Au1xx0 SOCs have a PCMCIA controller. + * We setup our 32-bit pseudo addresses to be equal to the + * 36-bit addr >> 4, to make it easier to check the address + * and fix it. + * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000. + * The pseudo address we use is 0xF400 0000. Any address over + * 0xF400 0000 is a PCMCIA pseudo address. + */ +#define PCMCIA_IO_PSEUDO_PHYS (PCMCIA_IO_PHYS_ADDR >> 4) +#define PCMCIA_ATTR_PSEUDO_PHYS (PCMCIA_ATTR_PHYS_ADDR >> 4) +#define PCMCIA_MEM_PSEUDO_PHYS (PCMCIA_MEM_PHYS_ADDR >> 4) +#define PCMCIA_PSEUDO_END (0xffffffff) + #ifndef _LANGUAGE_ASSEMBLY typedef volatile struct { /* 0x0000 */ u32 toytrim; diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 9f3adbd9f70..7c16d35679a 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -174,6 +174,17 @@ config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA +config PCMCIA_ALCHEMY_DEVBOARD + tristate "Alchemy Db/Pb1xxx PCMCIA socket services" + depends on SOC_AU1X00 && PCMCIA + select 64BIT_PHYS_ADDR + help + Enable this driver of you want PCMCIA support on your Alchemy + Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board. + NOT suitable for the PB1000! + + This driver is also available as a module called db1xxx_ss.ko + config PCMCIA_BCM63XX tristate "bcm63xx pcmcia support" depends on BCM63XX && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 83ff802de54..f128d71c74c 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -35,17 +35,10 @@ obj-$(CONFIG_OMAP_CF) += omap_cf.o obj-$(CONFIG_BFIN_CFPCMCIA) += bfin_cf_pcmcia.o obj-$(CONFIG_AT91_CF) += at91_cf.o obj-$(CONFIG_ELECTRA_CF) += electra_cf.o +obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o au1x00_ss-y += au1000_generic.o au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o -au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o -au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o sa1111_cs-y += sa1111_generic.o diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c deleted file mode 100644 index 3fdd664e41c..00000000000 --- a/drivers/pcmcia/au1000_db1x00.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * - * Alchemy Semi Db1x00 boards specific pcmcia routines. - * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * Copyright 2004 Pete Popov, updated the driver to 2.6. - * Followed the sa11xx API and largely copied many of the hardware - * independent functions. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#if defined(CONFIG_MIPS_DB1200) - #include -#elif defined(CONFIG_MIPS_PB1200) - #include -#else - #include -#endif - -#include -#include "au1000_generic.h" - -#if 0 -#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args) -#else -#define debug(x,args...) -#endif - - -struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS]; -extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int); - -static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt) -{ -#ifdef CONFIG_MIPS_DB1550 - skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3; -#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) - skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT; -#else - skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2; -#endif - return 0; -} - -static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt) -{ - bcsr_write(BCSR_PCMCIA, 0); /* turn off power */ - msleep(2); -} - -static void -db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state) -{ - u32 inserted; - unsigned char vs; - - state->ready = 0; - state->vs_Xv = 0; - state->vs_3v = 0; - state->detect = 0; - - switch (skt->nr) { - case 0: - vs = bcsr_read(BCSR_STATUS) & 0x3; -#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) - inserted = BOARD_CARD_INSERTED(0); -#else - inserted = !(bcsr_read(BCSR_STATUS) & (1 << 4)); -#endif - break; - case 1: - vs = (bcsr_read(BCSR_STATUS) & 0xC) >> 2; -#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) - inserted = BOARD_CARD_INSERTED(1); -#else - inserted = !(bcsr_read(BCSR_STATUS) & (1<<5)); -#endif - break; - default:/* should never happen */ - return; - } - - if (inserted) - debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n", - skt->nr, inserted, vs, bcsr_read(BCSR_PCMCIA)); - - if (inserted) { - switch (vs) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "db1x00 bad VS (%d)\n", - vs); - } - state->detect = 1; - state->ready = 1; - } - else { - /* if the card was previously inserted and then ejected, - * we should turn off power to it - */ - if ((skt->nr == 0) && - (bcsr_read(BCSR_PCMCIA) & BCSR_PCMCIA_PC0RST)) { - bcsr_mod(BCSR_PCMCIA, BCSR_PCMCIA_PC0RST | - BCSR_PCMCIA_PC0DRVEN | - BCSR_PCMCIA_PC0VPP | - BCSR_PCMCIA_PC0VCC, 0); - msleep(10); - } - else if ((skt->nr == 1) && - (bcsr_read(BCSR_PCMCIA) & BCSR_PCMCIA_PC1RST)) { - bcsr_mod(BCSR_PCMCIA, BCSR_PCMCIA_PC1RST | - BCSR_PCMCIA_PC1DRVEN | - BCSR_PCMCIA_PC1VPP | - BCSR_PCMCIA_PC1VCC, 0); - msleep(10); - } - } - - state->bvd1=1; - state->bvd2=1; - state->wrprot=0; -} - -static int -db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state) -{ - u16 pwr; - int sock = skt->nr; - - debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n", - sock, state->Vcc, state->Vpp, - state->flags & SS_RESET); - - /* pcmcia reg was set to zero at init time. Be careful when - * initializing a socket not to wipe out the settings of the - * other socket. - */ - pwr = bcsr_read(BCSR_PCMCIA); - pwr &= ~(0xf << sock*8); /* clear voltage settings */ - - state->Vpp = 0; - switch(state->Vcc){ - case 0: /* Vcc 0 */ - pwr |= SET_VCC_VPP(0,0,sock); - break; - case 50: /* Vcc 5V */ - switch(state->Vpp) { - case 0: - pwr |= SET_VCC_VPP(2,0,sock); - break; - case 50: - pwr |= SET_VCC_VPP(2,1,sock); - break; - case 12: - pwr |= SET_VCC_VPP(2,2,sock); - break; - case 33: - default: - pwr |= SET_VCC_VPP(0,0,sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - state->Vcc, - state->Vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(state->Vpp) { - case 0: - pwr |= SET_VCC_VPP(1,0,sock); - break; - case 12: - pwr |= SET_VCC_VPP(1,2,sock); - break; - case 33: - pwr |= SET_VCC_VPP(1,1,sock); - break; - case 50: - default: - pwr |= SET_VCC_VPP(0,0,sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - state->Vcc, - state->Vpp); - break; - } - break; - default: /* what's this ? */ - pwr |= SET_VCC_VPP(0,0,sock); - printk(KERN_ERR "%s: bad Vcc %d\n", - __func__, state->Vcc); - break; - } - - bcsr_write(BCSR_PCMCIA, pwr); - msleep(300); - - if (sock == 0) { - if (!(state->flags & SS_RESET)) { - pwr |= BCSR_PCMCIA_PC0DRVEN; - bcsr_write(BCSR_PCMCIA, pwr); - msleep(300); - pwr |= BCSR_PCMCIA_PC0RST; - bcsr_write(BCSR_PCMCIA, pwr); - msleep(100); - } - else { - pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN); - bcsr_write(BCSR_PCMCIA, pwr); - msleep(100); - } - } - else { - if (!(state->flags & SS_RESET)) { - pwr |= BCSR_PCMCIA_PC1DRVEN; - bcsr_write(BCSR_PCMCIA, pwr); - msleep(300); - pwr |= BCSR_PCMCIA_PC1RST; - bcsr_write(BCSR_PCMCIA, pwr); - msleep(100); - } - else { - pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN); - bcsr_write(BCSR_PCMCIA, pwr); - msleep(100); - } - } - return 0; -} - -/* - * Enable card status IRQs on (re-)initialisation. This can - * be called at initialisation, power management event, or - * pcmcia event. - */ -void db1x00_socket_init(struct au1000_pcmcia_socket *skt) -{ - /* nothing to do for now */ -} - -/* - * Disable card status IRQs and PCMCIA bus on suspend. - */ -void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt) -{ - /* nothing to do for now */ -} - -struct pcmcia_low_level db1x00_pcmcia_ops = { - .owner = THIS_MODULE, - - .hw_init = db1x00_pcmcia_hw_init, - .hw_shutdown = db1x00_pcmcia_shutdown, - - .socket_state = db1x00_pcmcia_socket_state, - .configure_socket = db1x00_pcmcia_configure_socket, - - .socket_init = db1x00_socket_init, - .socket_suspend = db1x00_socket_suspend -}; - -int au1x_board_init(struct device *dev) -{ - int ret = -ENODEV; - bcsr_write(BCSR_PCMCIA, 0); /* turn off power, if it's not already off */ - msleep(2); - ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2); - return ret; -} diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h index 13a4fbc5871..aa743f6875b 100644 --- a/drivers/pcmcia/au1000_generic.h +++ b/drivers/pcmcia/au1000_generic.h @@ -44,22 +44,12 @@ /* pcmcia socket 1 needs external glue logic so the memory map * differs from board to board. */ -#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || \ - defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || \ - defined(CONFIG_MIPS_PB1200) +#if defined(CONFIG_MIPS_PB1000) #define AU1X_SOCK1_IO 0xF08000000ULL #define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL #define AU1X_SOCK1_PHYS_MEM 0xF88000000ULL #define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000 #define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000 -#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ - defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || \ - defined(CONFIG_MIPS_DB1200) -#define AU1X_SOCK1_IO 0xF04000000ULL -#define AU1X_SOCK1_PHYS_ATTR 0xF44000000ULL -#define AU1X_SOCK1_PHYS_MEM 0xF84000000ULL -#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4400000 -#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8400000 #endif struct pcmcia_state { diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index b1984ed72d1..5a979cb8f3e 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -1,6 +1,6 @@ /* * - * Alchemy Semi Pb1x00 boards specific pcmcia routines. + * Alchemy Semi Pb1000 boards specific pcmcia routines. * * Copyright 2002 MontaVista Software Inc. * Author: MontaVista Software, Inc. @@ -46,20 +46,11 @@ #define debug(fmt, arg...) do { } while (0) -#ifdef CONFIG_MIPS_PB1000 #include #define PCMCIA_IRQ AU1000_GPIO_15 -#elif defined (CONFIG_MIPS_PB1500) -#include -#define PCMCIA_IRQ AU1500_GPIO_203 -#elif defined (CONFIG_MIPS_PB1100) -#include -#define PCMCIA_IRQ AU1000_GPIO_11 -#endif static int pb1x00_pcmcia_init(struct pcmcia_init *init) { -#ifdef CONFIG_MIPS_PB1000 u16 pcr; pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; @@ -74,21 +65,10 @@ static int pb1x00_pcmcia_init(struct pcmcia_init *init) au_sync_delay(20); return PCMCIA_NUM_SOCKS; - -#else /* fixme -- take care of the Pb1500 at some point */ - - u16 pcr; - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */ - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(500); - return PCMCIA_NUM_SOCKS; -#endif } static int pb1x00_pcmcia_shutdown(void) { -#ifdef CONFIG_MIPS_PB1000 u16 pcr; pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); @@ -96,14 +76,6 @@ static int pb1x00_pcmcia_shutdown(void) au_writel(pcr, PB1000_PCR); au_sync_delay(20); return 0; -#else - u16 pcr; - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */ - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(2); - return 0; -#endif } static int @@ -112,21 +84,11 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) u32 inserted0, inserted1; u16 vs0, vs1; -#ifdef CONFIG_MIPS_PB1000 vs0 = vs1 = (u16)au_readl(PB1000_ACR1); inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2)); inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2)); vs0 = (vs0 >> 4) & 0x3; vs1 = (vs1 >> 12) & 0x3; -#else - vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3; -#ifdef CONFIG_MIPS_PB1500 - inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */ -#else /* Pb1100 */ - inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */ -#endif - inserted1 = 0; -#endif state->ready = 0; state->vs_Xv = 0; @@ -203,7 +165,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) if(configure->sock > PCMCIA_MAX_SOCK) return -1; -#ifdef CONFIG_MIPS_PB1000 pcr = au_readl(PB1000_PCR); if (configure->sock == 0) { @@ -323,84 +284,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) au_writel(pcr, PB1000_PCR); au_sync_delay(300); -#else - - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; - - debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n", - configure->vcc, configure->vpp, pcr, configure->reset); - - - switch(configure->vcc){ - case 0: /* Vcc 0 */ - pcr |= SET_VCC_VPP(0,0); - break; - case 50: /* Vcc 5V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(2,0); - break; - case 50: - pcr |= SET_VCC_VPP(2,1); - break; - case 12: - pcr |= SET_VCC_VPP(2,2); - break; - case 33: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(1,0); - break; - case 12: - pcr |= SET_VCC_VPP(1,2); - break; - case 33: - pcr |= SET_VCC_VPP(1,1); - break; - case 50: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - default: /* what's this ? */ - pcr |= SET_VCC_VPP(0,0); - printk(KERN_ERR "%s: bad Vcc %d\n", - __func__, configure->vcc); - break; - } - - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(300); - - if (!configure->reset) { - pcr |= PC_DRV_EN; - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - pcr |= PC_DEASSERT_RST; - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - } - else { - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - } -#endif return 0; } diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c new file mode 100644 index 00000000000..b35b72b0d5b --- /dev/null +++ b/drivers/pcmcia/db1xxx_ss.c @@ -0,0 +1,630 @@ +/* + * PCMCIA socket code for the Alchemy Db1xxx/Pb1xxx boards. + * + * Copyright (c) 2009 Manuel Lauss + * + */ + +/* This is a fairly generic PCMCIA socket driver suitable for the + * following Alchemy Development boards: + * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200. + * + * The Db1000 is used as a reference: Per-socket card-, carddetect- and + * statuschange IRQs connected to SoC GPIOs, control and status register + * bits arranged in per-socket groups in an external PLD. All boards + * listed here use this layout, including bit positions and meanings. + * Of course there are exceptions in later boards: + * + * - Pb1100/Pb1500: single socket only; voltage key bits VS are + * at STATUS[5:4] (instead of STATUS[1:0]). + * - Au1200-based: additional card-eject irqs, irqs not gpios! + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#define MEM_MAP_SIZE 0x400000 +#define IO_MAP_SIZE 0x1000 + +struct db1x_pcmcia_sock { + struct pcmcia_socket socket; + int nr; /* socket number */ + void *virt_io; + + /* the "pseudo" addresses of the PCMCIA space. */ + unsigned long phys_io; + unsigned long phys_attr; + unsigned long phys_mem; + + /* previous flags for set_socket() */ + unsigned int old_flags; + + /* interrupt sources: linux irq numbers! */ + int insert_irq; /* default carddetect irq */ + int stschg_irq; /* card-status-change irq */ + int card_irq; /* card irq */ + int eject_irq; /* db1200/pb1200 have these */ + +#define BOARD_TYPE_DEFAULT 0 /* most boards */ +#define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */ +#define BOARD_TYPE_PB1100 2 /* VS bits slightly different */ + int board_type; +}; + +#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket) + +/* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */ +static int db1200_card_inserted(struct db1x_pcmcia_sock *sock) +{ + unsigned short sigstat; + + sigstat = bcsr_read(BCSR_SIGSTAT); + return sigstat & 1 << (8 + 2 * sock->nr); +} + +/* carddetect gpio: low-active */ +static int db1000_card_inserted(struct db1x_pcmcia_sock *sock) +{ + return !gpio_get_value(irq_to_gpio(sock->insert_irq)); +} + +static int db1x_card_inserted(struct db1x_pcmcia_sock *sock) +{ + switch (sock->board_type) { + case BOARD_TYPE_DB1200: + return db1200_card_inserted(sock); + default: + return db1000_card_inserted(sock); + } +} + +/* STSCHG tends to bounce heavily when cards are inserted/ejected. + * To avoid this, the interrupt is normally disabled and only enabled + * after reset to a card has been de-asserted. + */ +static inline void set_stschg(struct db1x_pcmcia_sock *sock, int en) +{ + if (sock->stschg_irq != -1) { + if (en) + enable_irq(sock->stschg_irq); + else + disable_irq(sock->stschg_irq); + } +} + +static irqreturn_t db1000_pcmcia_cdirq(int irq, void *data) +{ + struct db1x_pcmcia_sock *sock = data; + + pcmcia_parse_events(&sock->socket, SS_DETECT); + + return IRQ_HANDLED; +} + +static irqreturn_t db1000_pcmcia_stschgirq(int irq, void *data) +{ + struct db1x_pcmcia_sock *sock = data; + + pcmcia_parse_events(&sock->socket, SS_STSCHG); + + return IRQ_HANDLED; +} + +static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data) +{ + struct db1x_pcmcia_sock *sock = data; + + /* Db/Pb1200 have separate per-socket insertion and ejection + * interrupts which stay asserted as long as the card is + * inserted/missing. The one which caused us to be called + * needs to be disabled and the other one enabled. + */ + if (irq == sock->insert_irq) { + disable_irq_nosync(sock->insert_irq); + enable_irq(sock->eject_irq); + } else { + disable_irq_nosync(sock->eject_irq); + enable_irq(sock->insert_irq); + } + + pcmcia_parse_events(&sock->socket, SS_DETECT); + + return IRQ_HANDLED; +} + +static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) +{ + int ret; + unsigned long flags; + + if (sock->stschg_irq != -1) { + ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq, + 0, "pcmcia_stschg", sock); + if (ret) + return ret; + } + + /* Db/Pb1200 have separate per-socket insertion and ejection + * interrupts, which should show edge behaviour but don't. + * So interrupts are disabled until both insertion and + * ejection handler have been registered and the currently + * active one disabled. + */ + if (sock->board_type == BOARD_TYPE_DB1200) { + local_irq_save(flags); + + ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, + IRQF_DISABLED, "pcmcia_insert", sock); + if (ret) + goto out1; + + ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq, + IRQF_DISABLED, "pcmcia_eject", sock); + if (ret) { + free_irq(sock->insert_irq, sock); + local_irq_restore(flags); + goto out1; + } + + /* disable the currently active one */ + if (db1200_card_inserted(sock)) + disable_irq_nosync(sock->insert_irq); + else + disable_irq_nosync(sock->eject_irq); + + local_irq_restore(flags); + } else { + /* all other (older) Db1x00 boards use a GPIO to show + * card detection status: use both-edge triggers. + */ + set_irq_type(sock->insert_irq, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(sock->insert_irq, db1000_pcmcia_cdirq, + 0, "pcmcia_carddetect", sock); + + if (ret) + goto out1; + } + + return 0; /* all done */ + +out1: + if (sock->stschg_irq != -1) + free_irq(sock->stschg_irq, sock); + + return ret; +} + +static void db1x_pcmcia_free_irqs(struct db1x_pcmcia_sock *sock) +{ + if (sock->stschg_irq != -1) + free_irq(sock->stschg_irq, sock); + + free_irq(sock->insert_irq, sock); + if (sock->eject_irq != -1) + free_irq(sock->eject_irq, sock); +} + +/* + * configure a PCMCIA socket on the Db1x00 series of boards (and + * compatibles). + * + * 2 external registers are involved: + * pcmcia_status (offset 0x04): bits [0:1/2:3]: read card voltage id + * pcmcia_control(offset 0x10): + * bits[0:1] set vcc for card + * bits[2:3] set vpp for card + * bit 4: enable data buffers + * bit 7: reset# for card + * add 8 for second socket. + */ +static int db1x_pcmcia_configure(struct pcmcia_socket *skt, + struct socket_state_t *state) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + unsigned short cr_clr, cr_set; + unsigned int changed; + int v, p, ret; + + /* card voltage setup */ + cr_clr = (0xf << (sock->nr * 8)); /* clear voltage settings */ + cr_set = 0; + v = p = ret = 0; + + switch (state->Vcc) { + case 50: + ++v; + case 33: + ++v; + case 0: + break; + default: + printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n", + sock->nr, state->Vcc); + } + + switch (state->Vpp) { + case 12: + ++p; + case 33: + case 50: + ++p; + case 0: + break; + default: + printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n", + sock->nr, state->Vpp); + } + + /* sanity check: Vpp must be 0, 12, or Vcc */ + if (((state->Vcc == 33) && (state->Vpp == 50)) || + ((state->Vcc == 50) && (state->Vpp == 33))) { + printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n", + sock->nr, state->Vcc, state->Vpp); + v = p = 0; + ret = -EINVAL; + } + + /* create new voltage code */ + cr_set |= ((v << 2) | p) << (sock->nr * 8); + + changed = state->flags ^ sock->old_flags; + + if (changed & SS_RESET) { + if (state->flags & SS_RESET) { + set_stschg(sock, 0); + /* assert reset, disable io buffers */ + cr_clr |= (1 << (7 + (sock->nr * 8))); + cr_clr |= (1 << (4 + (sock->nr * 8))); + } else { + /* de-assert reset, enable io buffers */ + cr_set |= 1 << (7 + (sock->nr * 8)); + cr_set |= 1 << (4 + (sock->nr * 8)); + } + } + + /* update PCMCIA configuration */ + bcsr_mod(BCSR_PCMCIA, cr_clr, cr_set); + + sock->old_flags = state->flags; + + /* reset was taken away: give card time to initialize properly */ + if ((changed & SS_RESET) && !(state->flags & SS_RESET)) { + msleep(500); + set_stschg(sock, 1); + } + + return ret; +} + +/* VCC bits at [3:2]/[11:10] */ +#define GET_VCC(cr, socknr) \ + ((((cr) >> 2) >> ((socknr) * 8)) & 3) + +/* VS bits at [0:1]/[3:2] */ +#define GET_VS(sr, socknr) \ + (((sr) >> (2 * (socknr))) & 3) + +/* reset bits at [7]/[15] */ +#define GET_RESET(cr, socknr) \ + ((cr) & (1 << (7 + (8 * (socknr))))) + +static int db1x_pcmcia_get_status(struct pcmcia_socket *skt, + unsigned int *value) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + unsigned short cr, sr; + unsigned int status; + + status = db1x_card_inserted(sock) ? SS_DETECT : 0; + + cr = bcsr_read(BCSR_PCMCIA); + sr = bcsr_read(BCSR_STATUS); + + /* PB1100/PB1500: voltage key bits are at [5:4] */ + if (sock->board_type == BOARD_TYPE_PB1100) + sr >>= 4; + + /* determine card type */ + switch (GET_VS(sr, sock->nr)) { + case 0: + case 2: + status |= SS_3VCARD; /* 3V card */ + case 3: + break; /* 5V card: set nothing */ + default: + status |= SS_XVCARD; /* treated as unsupported in core */ + } + + /* if Vcc is not zero, we have applied power to a card */ + status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0; + + /* reset de-asserted? then we're ready */ + status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET; + + *value = status; + + return 0; +} + +static int db1x_pcmcia_sock_init(struct pcmcia_socket *skt) +{ + return 0; +} + +static int db1x_pcmcia_sock_suspend(struct pcmcia_socket *skt) +{ + return 0; +} + +static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt, + struct pccard_io_map *map) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + + map->start = (u32)sock->virt_io; + map->stop = map->start + IO_MAP_SIZE; + + return 0; +} + +static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt, + struct pccard_mem_map *map) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + + if (map->flags & MAP_ATTRIB) + map->static_start = sock->phys_attr + map->card_start; + else + map->static_start = sock->phys_mem + map->card_start; + + return 0; +} + +static struct pccard_operations db1x_pcmcia_operations = { + .init = db1x_pcmcia_sock_init, + .suspend = db1x_pcmcia_sock_suspend, + .get_status = db1x_pcmcia_get_status, + .set_socket = db1x_pcmcia_configure, + .set_io_map = au1x00_pcmcia_set_io_map, + .set_mem_map = au1x00_pcmcia_set_mem_map, +}; + +static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) +{ + struct db1x_pcmcia_sock *sock; + struct resource *r; + phys_t physio; + int ret, bid; + + sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL); + if (!sock) + return -ENOMEM; + + sock->nr = pdev->id; + + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + switch (bid) { + case BCSR_WHOAMI_PB1500: + case BCSR_WHOAMI_PB1500R2: + case BCSR_WHOAMI_PB1100: + sock->board_type = BOARD_TYPE_PB1100; + break; + case BCSR_WHOAMI_DB1000 ... BCSR_WHOAMI_PB1550_SDR: + sock->board_type = BOARD_TYPE_DEFAULT; + break; + case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200: + sock->board_type = BOARD_TYPE_DB1200; + break; + default: + printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid); + ret = -ENODEV; + goto out0; + }; + + /* + * gather resources necessary and optional nice-to-haves to + * operate a socket: + * This includes IRQs for Carddetection/ejection, the card + * itself and optional status change detection. + * Also, the memory areas covered by a socket. For these + * we require the 32bit "pseudo" addresses (see the au1000.h + * header for more information). + */ + + /* card: irq assigned to the card itself. */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card"); + sock->card_irq = r ? r->start : 0; + + /* insert: irq which triggers on card insertion/ejection */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert"); + sock->insert_irq = r ? r->start : -1; + + /* stschg: irq which trigger on card status change (optional) */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg"); + sock->stschg_irq = r ? r->start : -1; + + /* eject: irq which triggers on ejection (DB1200/PB1200 only) */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "eject"); + sock->eject_irq = r ? r->start : -1; + + ret = -ENODEV; + + /* + * pseudo-attr: The 32bit address of the PCMCIA attribute space + * for this socket (usually the 36bit address shifted 4 to the + * right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-attr"); + if (!r) { + printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n", + sock->nr); + goto out0; + } + sock->phys_attr = r->start; + + /* + * pseudo-mem: The 32bit address of the PCMCIA memory space for + * this socket (usually the 36bit address shifted 4 to the right) + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-mem"); + if (!r) { + printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n", + sock->nr); + goto out0; + } + sock->phys_mem = r->start; + + /* + * pseudo-io: The 32bit address of the PCMCIA IO space for this + * socket (usually the 36bit address shifted 4 to the right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-io"); + if (!r) { + printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n", + sock->nr); + goto out0; + } + sock->phys_io = r->start; + + + /* IO: we must remap the full 36bit address (for reference see + * alchemy/common/setup.c::__fixup_bigphys_addr()) + */ + physio = ((phys_t)sock->phys_io) << 4; + + /* + * PCMCIA client drivers use the inb/outb macros to access + * the IO registers. Since mips_io_port_base is added + * to the access address of the mips implementation of + * inb/outb, we need to subtract it here because we want + * to access the I/O or MEM address directly, without + * going through this "mips_io_port_base" mechanism. + */ + sock->virt_io = (void *)(ioremap(physio, IO_MAP_SIZE) - + mips_io_port_base); + + if (!sock->virt_io) { + printk(KERN_ERR "pcmcia%d: cannot remap IO area\n", + sock->nr); + ret = -ENOMEM; + goto out0; + } + + sock->socket.ops = &db1x_pcmcia_operations; + sock->socket.owner = THIS_MODULE; + sock->socket.pci_irq = sock->card_irq; + sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; + sock->socket.map_size = MEM_MAP_SIZE; + sock->socket.io_offset = (unsigned long)sock->virt_io; + sock->socket.dev.parent = &pdev->dev; + sock->socket.resource_ops = &pccard_static_ops; + + platform_set_drvdata(pdev, sock); + + ret = db1x_pcmcia_setup_irqs(sock); + if (ret) { + printk(KERN_ERR "pcmcia%d cannot setup interrupts\n", + sock->nr); + goto out1; + } + + set_stschg(sock, 0); + + ret = pcmcia_register_socket(&sock->socket); + if (ret) { + printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr); + goto out2; + } + + printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %08lx" + "(%p) %08lx %08lx card/insert/stschg/eject irqs @ %d " + "%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io, + sock->phys_attr, sock->phys_mem, sock->card_irq, + sock->insert_irq, sock->stschg_irq, sock->eject_irq); + + return 0; + +out2: + db1x_pcmcia_free_irqs(sock); +out1: + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); +out0: + kfree(sock); + return ret; +} + +static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev) +{ + struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev); + + db1x_pcmcia_free_irqs(sock); + pcmcia_unregister_socket(&sock->socket); + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); + kfree(sock); + + return 0; +} + +#ifdef CONFIG_PM +static int db1x_pcmcia_suspend(struct device *dev) +{ + return pcmcia_socket_dev_suspend(dev); +} + +static int db1x_pcmcia_resume(struct device *dev) +{ + return pcmcia_socket_dev_resume(dev); +} + +static struct dev_pm_ops db1x_pcmcia_pmops = { + .resume = db1x_pcmcia_resume, + .suspend = db1x_pcmcia_suspend, + .thaw = db1x_pcmcia_resume, + .freeze = db1x_pcmcia_suspend, +}; + +#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops + +#else + +#define DB1XXX_SS_PMOPS NULL + +#endif + +static struct platform_driver db1x_pcmcia_socket_driver = { + .driver = { + .name = "db1xxx_pcmcia", + .owner = THIS_MODULE, + .pm = DB1XXX_SS_PMOPS + }, + .probe = db1x_pcmcia_socket_probe, + .remove = __devexit_p(db1x_pcmcia_socket_remove), +}; + +int __init db1x_pcmcia_socket_load(void) +{ + return platform_driver_register(&db1x_pcmcia_socket_driver); +} + +void __exit db1x_pcmcia_socket_unload(void) +{ + platform_driver_unregister(&db1x_pcmcia_socket_driver); +} + +module_init(db1x_pcmcia_socket_load); +module_exit(db1x_pcmcia_socket_unload); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards"); +MODULE_AUTHOR("Manuel Lauss"); -- 2.20.1