From 6586c5d74e8c2883ed1246aae81275efb777c088 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 20 Jul 2012 21:04:13 +0200 Subject: [PATCH] can: Kconfig: convert 'depends on CAN_DEV' into 'if CAN_DEV...endif' block This patch adds an 'if CAN_DEV...endif' Block around the CAN driver symbols in drivers/net/can/Kconfig. So the 'depends on CAN' dependencies can be removed. Signed-off-by: Marc Kleine-Budde --- drivers/net/can/Kconfig | 21 ++++++++++++--------- drivers/net/can/c_can/Kconfig | 2 +- drivers/net/can/cc770/Kconfig | 2 +- drivers/net/can/mscan/Kconfig | 2 +- drivers/net/can/sja1000/Kconfig | 2 +- drivers/net/can/softing/Kconfig | 2 +- drivers/net/can/usb/Kconfig | 2 +- 7 files changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 8088d8fa5611..0c5a65682d01 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -36,9 +36,10 @@ config CAN_DEV support. This is the standard library for CAN drivers. If unsure, say Y. +if CAN_DEV + config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" - depends on CAN_DEV default y ---help--- If enabled, CAN bit-timing parameters will be calculated for the @@ -52,13 +53,13 @@ config CAN_CALC_BITTIMING config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN_DEV && (ARCH_AT91SAM9263 || ARCH_AT91SAM9X5) + depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9X5 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263 and AT91SAM9X5 processors. config CAN_TI_HECC - depends on CAN_DEV && ARCH_OMAP3 + depends on ARCH_OMAP3 tristate "TI High End CAN Controller" ---help--- Driver for TI HECC (High End CAN Controller) module found on many @@ -66,12 +67,12 @@ config CAN_TI_HECC config CAN_MCP251X tristate "Microchip MCP251x SPI CAN controllers" - depends on CAN_DEV && SPI && HAS_DMA + depends on SPI && HAS_DMA ---help--- Driver for the Microchip MCP251x SPI CAN controllers. config CAN_BFIN - depends on CAN_DEV && (BF534 || BF536 || BF537 || BF538 || BF539 || BF54x) + depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x tristate "Analog Devices Blackfin on-chip CAN" ---help--- Driver for the Analog Devices Blackfin on-chip CAN controllers @@ -81,7 +82,7 @@ config CAN_BFIN config CAN_JANZ_ICAN3 tristate "Janz VMOD-ICAN3 Intelligent CAN controller" - depends on CAN_DEV && MFD_JANZ_CMODIO + depends on MFD_JANZ_CMODIO ---help--- Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which connects to a MODULbus carrier board. @@ -94,13 +95,13 @@ config HAVE_CAN_FLEXCAN config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" - depends on CAN_DEV && HAVE_CAN_FLEXCAN + depends on HAVE_CAN_FLEXCAN ---help--- Say Y here if you want to support for Freescale FlexCAN. config PCH_CAN tristate "Intel EG20T PCH CAN controller" - depends on CAN_DEV && PCI + depends on PCI ---help--- This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which is an IOH for x86 embedded processor (Intel Atom E6xx series). @@ -108,7 +109,7 @@ config PCH_CAN config CAN_GRCAN tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices" - depends on CAN_DEV && OF + depends on OF ---help--- Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN. Note that the driver supports little endian, even though little @@ -127,6 +128,8 @@ source "drivers/net/can/usb/Kconfig" source "drivers/net/can/softing/Kconfig" +endif + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" ---help--- diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig index 3b83bafcd947..61ffc12d8fd8 100644 --- a/drivers/net/can/c_can/Kconfig +++ b/drivers/net/can/c_can/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_C_CAN tristate "Bosch C_CAN/D_CAN devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_C_CAN diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig index 22c07a8c8b43..6a9a5ba79220 100644 --- a/drivers/net/can/cc770/Kconfig +++ b/drivers/net/can/cc770/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_CC770 tristate "Bosch CC770 and Intel AN82527 devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_CC770 diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig index d38706958af6..f19be5269e7b 100644 --- a/drivers/net/can/mscan/Kconfig +++ b/drivers/net/can/mscan/Kconfig @@ -1,5 +1,5 @@ config CAN_MSCAN - depends on CAN_DEV && (PPC || M68K) + depends on PPC || M68K tristate "Support for Freescale MSCAN based chips" ---help--- The Motorola Scalable Controller Area Network (MSCAN) definition diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 92f73c708a3d..1bed54f1d40e 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -1,6 +1,6 @@ menuconfig CAN_SJA1000 tristate "Philips/NXP SJA1000 devices" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM if CAN_SJA1000 diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 5de46a9a77bb..96b6fe158b5b 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -1,6 +1,6 @@ config CAN_SOFTING tristate "Softing Gmbh CAN generic support" - depends on CAN_DEV && HAS_IOMEM + depends on HAS_IOMEM ---help--- Support for CAN cards from Softing Gmbh & some cards from Vector Gmbh. diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index a4e4bee35710..acba33d1e2b0 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -1,5 +1,5 @@ menu "CAN USB interfaces" - depends on USB && CAN_DEV + depends on USB config CAN_EMS_USB tristate "EMS CPC-USB/ARM7 CAN/USB interface" -- 2.20.1