From 64e0f8ba5cae74471f72e0cb218c67915e365f47 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 26 Jun 2014 12:40:21 +0530 Subject: [PATCH] irqchip: crossbar: Introduce ti, irqs-skip to skip irqs that bypass crossbar When, in the system due to varied reasons, interrupts might be unusable due to hardware behavior, but register maps do exist, then those interrupts should be skipped while mapping irq to crossbars. Signed-off-by: Nishanth Menon Signed-off-by: Sricharan R Acked-by: Santosh Shilimkar Link: https://lkml.kernel.org/r/1403766634-18543-4-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper --- .../devicetree/bindings/arm/omap/crossbar.txt | 6 ++++++ drivers/irqchip/irq-crossbar.c | 20 +++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index fb88585cfb93..079576573ec0 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -17,6 +17,11 @@ Required properties: so crossbar bar driver should not consider them as free lines. +Optional properties: +- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for + SOC-specific hard-wiring of those irqs which unexpectedly bypasses the + crossbar. These irqs have a crossbar register, but still cannot be used. + Examples: crossbar_mpu: @4a020000 { compatible = "ti,irq-crossbar"; @@ -24,4 +29,5 @@ Examples: ti,max-irqs = <160>; ti,reg-size = <2>; ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + ti,irqs-skip = <10 133 139 140>; }; diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c index 51d4b878e5d6..0533a71fa86f 100644 --- a/drivers/irqchip/irq-crossbar.c +++ b/drivers/irqchip/irq-crossbar.c @@ -18,6 +18,7 @@ #define IRQ_FREE -1 #define IRQ_RESERVED -2 +#define IRQ_SKIP -3 #define GIC_IRQ_START 32 /* @@ -160,6 +161,25 @@ static int __init crossbar_of_init(struct device_node *node) } } + /* Skip irqs hardwired to bypass the crossbar */ + irqsr = of_get_property(node, "ti,irqs-skip", &size); + if (irqsr) { + size /= sizeof(__be32); + + for (i = 0; i < size; i++) { + of_property_read_u32_index(node, + "ti,irqs-skip", + i, &entry); + if (entry > max) { + pr_err("Invalid skip entry\n"); + ret = -EINVAL; + goto err3; + } + cb->irq_map[entry] = IRQ_SKIP; + } + } + + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); if (!cb->register_offsets) goto err3; -- 2.20.1