From 64a2af0e69a599475ff71b740409191e1954e9b8 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 20:58:45 +0200 Subject: [PATCH] libertas: fix suspend and resume for SDIO connected cards commit 7444a8092906ed44c09459780c56ba57043e39b1 upstream. Prior to commit 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus"), the MMC core used to call into the power management functions of SDIO clients itself and removed the card if the return code was non-zero. IOW, the mmc handled errors gracefully and didn't upchain them to the pm core. Since this change, the mmc core relies on generic power management functions which treat all errors as a reason to cancel the suspend immediately. This causes suspend attempts to fail when the libertas driver is loaded. To fix this, power down the card explicitly in if_sdio_suspend() when we know we're about to lose power and return success. Also set a flag in these cases, and power up the card again in if_sdio_resume(). Fixes: 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus") Cc: Signed-off-by: Daniel Mack Reviewed-by: Chris Ball Reviewed-by: Ulf Hansson Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/marvell/libertas/dev.h | 1 + .../net/wireless/marvell/libertas/if_sdio.c | 30 +++++++++++++++---- 2 files changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/marvell/libertas/dev.h b/drivers/net/wireless/marvell/libertas/dev.h index edf710bc5e77..3de1457ad3a7 100644 --- a/drivers/net/wireless/marvell/libertas/dev.h +++ b/drivers/net/wireless/marvell/libertas/dev.h @@ -103,6 +103,7 @@ struct lbs_private { u8 fw_ready; u8 surpriseremoved; u8 setup_fw_on_resume; + u8 power_up_on_resume; int (*hw_host_to_card) (struct lbs_private *priv, u8 type, u8 *payload, u16 nb); void (*reset_card) (struct lbs_private *priv); int (*power_save) (struct lbs_private *priv); diff --git a/drivers/net/wireless/marvell/libertas/if_sdio.c b/drivers/net/wireless/marvell/libertas/if_sdio.c index 47f4a14c84fe..a0ae8d8763bb 100644 --- a/drivers/net/wireless/marvell/libertas/if_sdio.c +++ b/drivers/net/wireless/marvell/libertas/if_sdio.c @@ -1341,15 +1341,23 @@ static void if_sdio_remove(struct sdio_func *func) static int if_sdio_suspend(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); - int ret; struct if_sdio_card *card = sdio_get_drvdata(func); + struct lbs_private *priv = card->priv; + int ret; mmc_pm_flag_t flags = sdio_get_host_pm_caps(func); + priv->power_up_on_resume = false; /* If we're powered off anyway, just let the mmc layer remove the * card. */ - if (!lbs_iface_active(card->priv)) - return -ENOSYS; + if (!lbs_iface_active(priv)) { + if (priv->fw_ready) { + priv->power_up_on_resume = true; + if_sdio_power_off(card); + } + + return 0; + } dev_info(dev, "%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags); @@ -1357,9 +1365,14 @@ static int if_sdio_suspend(struct device *dev) /* If we aren't being asked to wake on anything, we should bail out * and let the SD stack power down the card. */ - if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) { + if (priv->wol_criteria == EHS_REMOVE_WAKEUP) { dev_info(dev, "Suspend without wake params -- powering down card\n"); - return -ENOSYS; + if (priv->fw_ready) { + priv->power_up_on_resume = true; + if_sdio_power_off(card); + } + + return 0; } if (!(flags & MMC_PM_KEEP_POWER)) { @@ -1372,7 +1385,7 @@ static int if_sdio_suspend(struct device *dev) if (ret) return ret; - ret = lbs_suspend(card->priv); + ret = lbs_suspend(priv); if (ret) return ret; @@ -1387,6 +1400,11 @@ static int if_sdio_resume(struct device *dev) dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func)); + if (card->priv->power_up_on_resume) { + if_sdio_power_on(card); + wait_event(card->pwron_waitq, card->priv->fw_ready); + } + ret = lbs_resume(card->priv); return ret; -- 2.20.1