From 6328a57401dc5f5cf9931738eb7268fcd8058c49 Mon Sep 17 00:00:00 2001 From: Witold Szczeponik Date: Mon, 30 Mar 2009 19:31:06 +0200 Subject: [PATCH] Enable PNPACPI _PSx Support, v3 (This is an update to the patch presented earlier in http://lkml.org/lkml/2008/12/8/284, with new error handling.) This patch sets the power of PnP ACPI devices to D0 when they are activated and to D3 when they are disabled. The latter is in correspondence with the ACPI 3.0 specification, whereas the former is added in order to be able to power up a device after it has been previously disabled (or when booting up a system). (As a consequence, the patch makes the PnP ACPI code more ACPI compliant.) Section 6.2.2 of the ACPI Specification (at least versions 1.0b and 3.0a) states: "Prior to running this control method [_DIS], the OS[PM] will have already put the device in the D3 state." Unfortunately, there is no clear statement as to when to put a device in the D0 state. :-( Therefore, the patch executes the method calls as _PS3/_DIS and _SRS/_PS0. What is clear: "If the device is disabled, _SRS enables the device at the specified resources." (From the ACPI 3.0a Specification.) The patch fixes a problem with some IBM ThinkPads (at least the 600E and the 600X) where the serial ports have a dedicated power source that needs to be brought up before the serial port can be used. Without this patch, the serial port is enabled but has no power. (In the past, the tpctl utility had to be utilized to turn on the power, but support for this feature stopped with version 5.9 as it did not support the more recent kernel versions.) The error handlers that handle any errors that can occur during the power up/power down phases return the error codes to the caller directly. Comments welcome! :-) No regressions were observed on hardware that does not require this patch. The patch is applied against 2.6.27.x. Signed-off-by: Witold Szczeponik Acked-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/core.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 2834846a185..9a3a682c698 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -83,7 +83,6 @@ static int pnpacpi_set_resources(struct pnp_dev *dev) acpi_handle handle = dev->data; struct acpi_buffer buffer; int ret; - acpi_status status; pnp_dbg(&dev->dev, "set resources\n"); ret = pnpacpi_build_resource_template(dev, &buffer); @@ -94,21 +93,31 @@ static int pnpacpi_set_resources(struct pnp_dev *dev) kfree(buffer.pointer); return ret; } - status = acpi_set_current_resources(handle, &buffer); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(acpi_set_current_resources(handle, &buffer))) ret = -EINVAL; + else if (acpi_bus_power_manageable(handle)) + ret = acpi_bus_set_power(handle, ACPI_STATE_D0); kfree(buffer.pointer); return ret; } static int pnpacpi_disable_resources(struct pnp_dev *dev) { - acpi_status status; + acpi_handle handle = dev->data; + int ret; + + dev_dbg(&dev->dev, "disable resources\n"); /* acpi_unregister_gsi(pnp_irq(dev, 0)); */ - status = acpi_evaluate_object((acpi_handle) dev->data, - "_DIS", NULL, NULL); - return ACPI_FAILURE(status) ? -ENODEV : 0; + ret = 0; + if (acpi_bus_power_manageable(handle)) { + ret = acpi_bus_set_power(handle, ACPI_STATE_D3); + if (ret) + return ret; + } + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL))) + ret = -ENODEV; + return ret; } #ifdef CONFIG_ACPI_SLEEP -- 2.20.1