From 6323876f5539e808a293395b1960427c62d2436d Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sun, 3 Jan 2016 16:05:15 +1100 Subject: [PATCH] ncr5380: Use return instead of goto in NCR5380_select() The "failed" label in NCR5380_select() is not helpful. Some failures return 0, others -1. Use return instead of goto to improve clarity and brevity, like atari_NCR5380.c does. Fix the relevant comments. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Tested-by: Ondrej Zary Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen --- drivers/scsi/NCR5380.c | 30 ++++++++---------------------- drivers/scsi/atari_NCR5380.c | 6 +++--- 2 files changed, 11 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index b75c92967d6e..ce80a5c65eb3 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -997,16 +997,6 @@ static void NCR5380_main(struct work_struct *work) */ dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main() : command for target %d lun %llu removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun); - /* - * A successful selection is defined as one that - * leaves us with the command connected and - * in hostdata->connected, OR has terminated the - * command. - * - * With successful commands, we fall through - * and see if we can do an information transfer, - * with failures we will restart. - */ hostdata->selecting = NULL; /* RvC: have to preset this to indicate a new command is being performed */ @@ -1162,9 +1152,10 @@ static irqreturn_t NCR5380_intr(int dummy, void *dev_id) * Inputs : instance - instantiation of the 5380 driver on which this * target lives, cmd - SCSI command to execute. * - * Returns : -1 if selection could not execute for some reason, - * 0 if selection succeeded or failed because the target - * did not respond. + * Returns : -1 if selection failed but should be retried. + * 0 if selection failed and should not be retried. + * 0 if selection succeeded completely (hostdata->connected == cmd). + * 0 if selection in progress (hostdata->selecting == cmd). * * Side effects : * If bus busy, arbitration failed, etc, NCR5380_select() will exit @@ -1224,7 +1215,7 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) printk(KERN_DEBUG "scsi: arbitration timeout at %d\n", __LINE__); NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - goto failed; + return -1; } dprintk(NDEBUG_ARBITRATION, "scsi%d : arbitration complete\n", instance->host_no); @@ -1242,7 +1233,7 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) { NCR5380_write(MODE_REG, MR_BASE); dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no); - goto failed; + return -1; } NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL); @@ -1255,7 +1246,7 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", instance->host_no); - goto failed; + return -1; } /* * Again, bus clear + bus settle time is 1.2us, however, this is @@ -1412,7 +1403,7 @@ part2: if(err) { printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - goto failed; + return -1; } dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id); @@ -1433,11 +1424,6 @@ part2: initialize_SCp(cmd); return 0; - - /* Selection failed */ -failed: - return -1; - } /* diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index df42610df6e4..6c382d1c67ff 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -1382,9 +1382,9 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id) * Inputs : instance - instantiation of the 5380 driver on which this * target lives, cmd - SCSI command to execute. * - * Returns : -1 if selection could not execute for some reason, - * 0 if selection succeeded or failed because the target - * did not respond. + * Returns : -1 if selection failed but should be retried. + * 0 if selection failed and should not be retried. + * 0 if selection succeeded completely (hostdata->connected == cmd). * * Side effects : * If bus busy, arbitration failed, etc, NCR5380_select() will exit -- 2.20.1