From 62c8c20af92ea312ecb22cec4e83082e5843076b Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 23 Oct 2015 09:29:57 +0300 Subject: [PATCH] rtc: ds1307: Fix alarm programming for mcp794xx mcp794xx alarm registers must be written in BCD format. However, the alarm programming logic neglected this by adding one to the value after bin2bcd conversion has been already done, writing bad values to month register in case the alarm being set is in October. In this case, the alarm month value becomes 0x0a instead of the expected 0x10. Fix by moving the +1 addition within the bin2bcd call also. Fixes: 1d1945d261a2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips") Signed-off-by: Tero Kristo Acked-by: Nishanth Menon Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1307.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index a705e6490808..188006c55ce0 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -718,9 +718,9 @@ static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t) regs[3] = bin2bcd(t->time.tm_sec); regs[4] = bin2bcd(t->time.tm_min); regs[5] = bin2bcd(t->time.tm_hour); - regs[6] = bin2bcd(t->time.tm_wday) + 1; + regs[6] = bin2bcd(t->time.tm_wday + 1); regs[7] = bin2bcd(t->time.tm_mday); - regs[8] = bin2bcd(t->time.tm_mon) + 1; + regs[8] = bin2bcd(t->time.tm_mon + 1); /* Clear the alarm 0 interrupt flag. */ regs[6] &= ~MCP794XX_BIT_ALMX_IF; -- 2.20.1