From 62a276f81fca41778abd8cb6d720a36302a89473 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 6 Sep 2013 11:26:24 -0600 Subject: [PATCH] [SCSI] qla2xxx: Use standard PCIe Capability Link register field names Use the standard #defines for PCIe Link Capability register fields rather than bare numbers. This also uses the new PCI Express Capability accessor rather than reading the capability directly. Signed-off-by: Bjorn Helgaas Acked-by: Saurav Kashyap Acked-by: Giridhar Malavali --- drivers/scsi/qla2xxx/qla_os.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 9f01bbbf3a26..bcd57f699ebb 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -494,18 +494,14 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str) static char *pci_bus_modes[] = { "33", "66", "100", "133", }; struct qla_hw_data *ha = vha->hw; uint32_t pci_bus; - int pcie_reg; - pcie_reg = pci_pcie_cap(ha->pdev); - if (pcie_reg) { + if (pci_is_pcie(ha->pdev)) { char lwstr[6]; - uint16_t pcie_lstat, lspeed, lwidth; + uint32_t lstat, lspeed, lwidth; - pcie_reg += PCI_EXP_LNKCAP; - pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat); - lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3); - lwidth = (pcie_lstat & - (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4; + pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat); + lspeed = lstat & PCI_EXP_LNKCAP_SLS; + lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4; strcpy(str, "PCIe ("); switch (lspeed) { -- 2.20.1