From 61fd56309165d4790f99462d893b099f0b07312a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Sep 2015 21:02:58 +0200 Subject: [PATCH] iio: st_accel: fix interrupt handling on LIS3LV02 This accelerometer accidentally either emits a DRDY signal or an IRQ signal. Accidentally I activated the IRQ signal as I thought it was analogous to the interrupt generator on other ST accelerometers. This was wrong. After this patch generic_buffer gives a nice stream of accelerometer readings. Fixes: 3acddf74f807778f "iio: st-sensors: add support for lis3lv02d accelerometer" Cc: Denis CIOCCA Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index ff30f8806880..fb9311110424 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -149,8 +149,6 @@ #define ST_ACCEL_4_BDU_MASK 0x40 #define ST_ACCEL_4_DRDY_IRQ_ADDR 0x21 #define ST_ACCEL_4_DRDY_IRQ_INT1_MASK 0x04 -#define ST_ACCEL_4_IG1_EN_ADDR 0x21 -#define ST_ACCEL_4_IG1_EN_MASK 0x08 #define ST_ACCEL_4_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 5 */ @@ -489,10 +487,6 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .drdy_irq = { .addr = ST_ACCEL_4_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK, - .ig1 = { - .en_addr = ST_ACCEL_4_IG1_EN_ADDR, - .en_mask = ST_ACCEL_4_IG1_EN_MASK, - }, }, .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT, .bootime = 2, /* guess */ -- 2.20.1