From 61c9e029912d4962c52361f0f7cb5f77c405f08b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 20 Apr 2017 16:25:11 +0530 Subject: [PATCH] arm64: dts: zte: Use - instead of @ for DT OPP entries Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Acked-by: Rob Herring Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/zte/zx296718.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index 316dc713268c..d83bf789c864 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -118,27 +118,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <500000>; }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; clock-latency-ns = <500000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <500000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <500000>; }; - opp@1188000000 { + opp-1188000000 { opp-hz = /bits/ 64 <1188000000>; clock-latency-ns = <500000>; }; -- 2.20.1