From 5f9b2ea3da8cf079e22cbb0fc2ed1b9034f7dd42 Mon Sep 17 00:00:00 2001 From: Abhijeet Dharmapurikar Date: Wed, 10 May 2017 19:55:38 +0530 Subject: [PATCH] spmi: pmic_arb: use appropriate flow handler The current code uses handle_level_irq flow handler even if the trigger type of the interrupt is edge. This can lead to missing of an edge transition that happens when the interrupt is being handled. The level flow handler masks the interrupt while it is being handled, so if an edge transition happens at that time, that edge is lost. Use an edge flow handler for edge type interrupts which ensures that the interrupt stays enabled while being handled - at least until it triggers at which point the flow handler sets the IRQF_PENDING flag and only then masks the interrupt. That IRQF_PENDING state indicates an edge transition happened while the interrupt was being handled and the handler is called again. Signed-off-by: Abhijeet Dharmapurikar Signed-off-by: Kiran Gunda Signed-off-by: Greg Kroah-Hartman --- drivers/spmi/spmi-pmic-arb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index 1d23df09bad8..ad344916493c 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -625,6 +625,12 @@ static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type) } qpnpint_spmi_write(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type)); + + if (flow_type & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(d, handle_edge_irq); + else + irq_set_handler_locked(d, handle_level_irq); + return 0; } -- 2.20.1