From 5f9809487bf035b49ff470709a65fbce3b345f51 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 8 Sep 2005 21:56:56 -0700 Subject: [PATCH] [PATCH] USB: proc_usb_info.txt: add blank lines Update Documentation/usb/proc_usb_info.txt: - remove some trailing whitespace - add a blank line before each T: line to match current kernel and to make the text more readable. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/proc_usb_info.txt | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt index 729c72d34c89..f86550fe38ee 100644 --- a/Documentation/usb/proc_usb_info.txt +++ b/Documentation/usb/proc_usb_info.txt @@ -20,7 +20,7 @@ the /proc/bus/usb/BBB/DDD files. to /etc/fstab. This will mount usbfs at each reboot. You can then issue `cat /proc/bus/usb/devices` to extract - USB device information, and user mode drivers can use usbfs + USB device information, and user mode drivers can use usbfs to interact with USB devices. There are a number of mount options supported by usbfs. @@ -32,7 +32,7 @@ the /proc/bus/usb/BBB/DDD files. still see references to the older "usbdevfs" name. For more information on mounting the usbfs file system, see the -"USB Device Filesystem" section of the USB Guide. The latest copy +"USB Device Filesystem" section of the USB Guide. The latest copy of the USB Guide can be found at http://www.linux-usb.org/ @@ -133,7 +133,7 @@ B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd are the only transfers that reserve bandwidth. Control and bulk transfers use all other bandwidth, including reserved bandwidth that is not used for transfers (such as for short packets). - + The percentage is how much of the "reserved" bandwidth is scheduled by those transfers. For a low or full speed bus (loosely, "USB 1.1"), 90% of the bus bandwidth is reserved. For a high speed bus (loosely, @@ -197,7 +197,7 @@ C:* #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA | | |__NumberOfInterfaces | |__ "*" indicates the active configuration (others are " ") |__Config info tag - + USB devices may have multiple configurations, each of which act rather differently. For example, a bus-powered configuration might be much less capable than one that is self-powered. Only @@ -228,7 +228,7 @@ I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss For example, default settings may not use more than a small amount of periodic bandwidth. To use significant fractions of bus bandwidth, drivers must select a non-default altsetting. - + Only one setting for an interface may be active at a time, and only one driver may bind to an interface at a time. Most devices have only one alternate setting per interface. @@ -297,18 +297,21 @@ S: SerialNumber=dce0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms + T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0451 ProdID=1446 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms + T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b4 ProdID=0001 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms + T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0565 ProdID=0001 Rev= 1.08 -- 2.20.1