From 5f5d2df8ab0b5b6e8514c69b33cc92cac45cda75 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Apr 2009 16:06:29 +0200 Subject: [PATCH] Staging: rt2860: prepare for rt28[67]0/sta/*.[ch] merge Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/sta/assoc.c | 268 +++++++++++++++++++++++++ drivers/staging/rt2860/sta/connect.c | 198 ++++++++++++++++++ drivers/staging/rt2860/sta/rtmp_data.c | 119 +++++++++++ drivers/staging/rt2860/sta/sync.c | 100 +++++++++ drivers/staging/rt2860/sta/wpa.c | 9 + 5 files changed, 694 insertions(+) diff --git a/drivers/staging/rt2860/sta/assoc.c b/drivers/staging/rt2860/sta/assoc.c index e5bfb0fb8d51..a0734c65bc2f 100644 --- a/drivers/staging/rt2860/sta/assoc.c +++ b/drivers/staging/rt2860/sta/assoc.c @@ -454,6 +454,11 @@ VOID MlmeAssocReqAction( RSNIe = IE_WPA2; } +#ifdef RT30xx +#ifdef SIOCSIWGENIE + if (pAd->StaCfg.WpaSupplicantUP != 1) +#endif // SIOCSIWGENIE // +#endif RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0); // Check for WPA PMK cache list @@ -480,6 +485,17 @@ VOID MlmeAssocReqAction( } } +#ifdef RT30xx +#ifdef SIOCSIWGENIE + if (pAd->StaCfg.WpaSupplicantUP == 1) + { + MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, + pAd->StaCfg.RSNIE_Len, pAd->StaCfg.RSN_IE, + END_OF_ARGS); + } + else +#endif +#endif { MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, 1, &RSNIe, @@ -490,6 +506,11 @@ VOID MlmeAssocReqAction( FrameLen += tmp; +#ifdef RT30xx +#ifdef SIOCSIWGENIE + if (pAd->StaCfg.WpaSupplicantUP != 1) +#endif +#endif { // Append Variable IE NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1); @@ -882,6 +903,7 @@ VOID PeerAssocRspAction( RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled); if(Status == MLME_SUCCESS) { +#ifdef RT2860 // go to procedure listed on page 376 AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen, &EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo); @@ -895,7 +917,29 @@ VOID PeerAssocRspAction( wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); } +#endif +#ifdef RT2870 + UCHAR MaxSupportedRateIn500Kbps = 0; + UCHAR idx; + + // supported rates array may not be sorted. sort it and find the maximum rate + for (idx=0; idxMacTab.Content[BSSID_WCID], MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo); +#endif pAd->StaCfg.CkipFlag = CkipFlag; if (CkipFlag & 0x18) { @@ -1485,3 +1529,227 @@ int wext_notify_event_assoc( return 0; } + +#ifdef RT2870 +BOOLEAN StaAddMacTableEntry( + IN PRTMP_ADAPTER pAd, + IN PMAC_TABLE_ENTRY pEntry, + IN UCHAR MaxSupportedRateIn500Kbps, + IN HT_CAPABILITY_IE *pHtCapability, + IN UCHAR HtCapabilityLen, + IN USHORT CapabilityInfo) +{ + UCHAR MaxSupportedRate = RATE_11; + + if (ADHOC_ON(pAd)) + CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE); + + switch (MaxSupportedRateIn500Kbps) + { + case 108: MaxSupportedRate = RATE_54; break; + case 96: MaxSupportedRate = RATE_48; break; + case 72: MaxSupportedRate = RATE_36; break; + case 48: MaxSupportedRate = RATE_24; break; + case 36: MaxSupportedRate = RATE_18; break; + case 24: MaxSupportedRate = RATE_12; break; + case 18: MaxSupportedRate = RATE_9; break; + case 12: MaxSupportedRate = RATE_6; break; + case 22: MaxSupportedRate = RATE_11; break; + case 11: MaxSupportedRate = RATE_5_5; break; + case 4: MaxSupportedRate = RATE_2; break; + case 2: MaxSupportedRate = RATE_1; break; + default: MaxSupportedRate = RATE_11; break; + } + + if ((pAd->CommonCfg.PhyMode == PHY_11G) && (MaxSupportedRate < RATE_FIRST_OFDM_RATE)) + return FALSE; + + // 11n only + if (((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))&& (HtCapabilityLen == 0)) + return FALSE; + + if (!pEntry) + return FALSE; + + NdisAcquireSpinLock(&pAd->MacTabLock); + if (pEntry) + { + pEntry->PortSecured = WPA_802_1X_PORT_SECURED; + if ((MaxSupportedRate < RATE_FIRST_OFDM_RATE) || + (pAd->CommonCfg.PhyMode == PHY_11B)) + { + pEntry->RateLen = 4; + if (MaxSupportedRate >= RATE_FIRST_OFDM_RATE) + MaxSupportedRate = RATE_11; + } + else + pEntry->RateLen = 12; + + pEntry->MaxHTPhyMode.word = 0; + pEntry->MinHTPhyMode.word = 0; + pEntry->HTPhyMode.word = 0; + pEntry->MaxSupportedRate = MaxSupportedRate; + if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE) + { + pEntry->MaxHTPhyMode.field.MODE = MODE_CCK; + pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate; + pEntry->MinHTPhyMode.field.MODE = MODE_CCK; + pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate; + pEntry->HTPhyMode.field.MODE = MODE_CCK; + pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate; + } + else + { + pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM; + pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate]; + pEntry->MinHTPhyMode.field.MODE = MODE_OFDM; + pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate]; + pEntry->HTPhyMode.field.MODE = MODE_OFDM; + pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate]; + } + pEntry->CapabilityInfo = CapabilityInfo; + CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE); + CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE); + } + + // If this Entry supports 802.11n, upgrade to HT rate. + if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)) + { + UCHAR j, bitmask; //k,bitmask; + CHAR i; + + if (ADHOC_ON(pAd)) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE); + if ((pHtCapability->HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF)) + { + pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD; + } + else + { + pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX; + pAd->MacTab.fAnyStationNonGF = TRUE; + pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1; + } + + if ((pHtCapability->HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth)) + { + pEntry->MaxHTPhyMode.field.BW= BW_40; + pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(pHtCapability->HtCapInfo.ShortGIfor40)); + } + else + { + pEntry->MaxHTPhyMode.field.BW = BW_20; + pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(pHtCapability->HtCapInfo.ShortGIfor20)); + pAd->MacTab.fAnyStation20Only = TRUE; + } + + // 3*3 + if (pAd->MACVersion >= RALINK_2883_VERSION && pAd->MACVersion < RALINK_3070_VERSION) + pEntry->MaxHTPhyMode.field.TxBF = pAd->CommonCfg.RegTransmitSetting.field.TxBF; + + // find max fixed rate + for (i=23; i>=0; i--) // 3*3 + { + j = i/8; + bitmask = (1<<(i-(j*8))); + if ((pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j] & bitmask) && (pHtCapability->MCSSet[j] & bitmask)) + { + pEntry->MaxHTPhyMode.field.MCS = i; + break; + } + if (i==0) + break; + } + + + if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) + { + if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32) + { + // Fix MCS as HT Duplicated Mode + pEntry->MaxHTPhyMode.field.BW = 1; + pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX; + pEntry->MaxHTPhyMode.field.STBC = 0; + pEntry->MaxHTPhyMode.field.ShortGI = 0; + pEntry->MaxHTPhyMode.field.MCS = 32; + } + else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS) + { + // STA supports fixed MCS + pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; + } + } + + pEntry->MaxHTPhyMode.field.STBC = (pHtCapability->HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC)); + pEntry->MpduDensity = pHtCapability->HtCapParm.MpduDensity; + pEntry->MaxRAmpduFactor = pHtCapability->HtCapParm.MaxRAmpduFactor; + pEntry->MmpsMode = (UCHAR)pHtCapability->HtCapInfo.MimoPs; + pEntry->AMsduSize = (UCHAR)pHtCapability->HtCapInfo.AMsduSize; + pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word; + + if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable && (pAd->CommonCfg.REGBACapability.field.AutoBA == FALSE)) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED); + if (pHtCapability->HtCapInfo.ShortGIfor20) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE); + if (pHtCapability->HtCapInfo.ShortGIfor40) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE); + if (pHtCapability->HtCapInfo.TxSTBC) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE); + if (pHtCapability->HtCapInfo.RxSTBC) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE); + if (pHtCapability->ExtHtCapInfo.PlusHTC) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE); + if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE); + if (pHtCapability->ExtHtCapInfo.MCSFeedback == 0x03) + CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE); + } + else + { + pAd->MacTab.fAnyStationIsLegacy = TRUE; + } + + NdisMoveMemory(&pEntry->HTCapability, pHtCapability, sizeof(HT_CAPABILITY_IE)); + + pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word; + pEntry->CurrTxRate = pEntry->MaxSupportedRate; + + // Set asic auto fall back + if (pAd->StaCfg.bAutoTxRateSwitch == TRUE) + { + PUCHAR pTable; + UCHAR TableSize = 0; + + MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex); + pEntry->bAutoTxRateSwitch = TRUE; + } + else + { + pEntry->HTPhyMode.field.MODE = pAd->StaCfg.HTPhyMode.field.MODE; + pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS; + pEntry->bAutoTxRateSwitch = FALSE; + + // If the legacy mode is set, overwrite the transmit setting of this entry. + RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry); + } + + pEntry->PortSecured = WPA_802_1X_PORT_SECURED; + pEntry->Sst = SST_ASSOC; + pEntry->AuthState = AS_AUTH_OPEN; + pEntry->AuthMode = pAd->StaCfg.AuthMode; + pEntry->WepStatus = pAd->StaCfg.WepStatus; + + NdisReleaseSpinLock(&pAd->MacTabLock); + + { + union iwreq_data wrqu; + wext_notify_event_assoc(pAd); + + memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN); + memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN); + wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); + + } + return TRUE; +} +#endif /* RT2870 */ diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c index 01521032635d..ac7135186665 100644 --- a/drivers/staging/rt2860/sta/connect.c +++ b/drivers/staging/rt2860/sta/connect.c @@ -188,6 +188,38 @@ VOID MlmeCntlMachinePerformAction( pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; } break; +#ifdef RT2870 + // + // This state is for that we want to connect to an AP but + // it didn't find on BSS List table. So we need to scan the air first, + // after that we can try to connect to the desired AP if available. + // + case CNTL_WAIT_SCAN_FOR_CONNECT: + if(Elem->MsgType == MT2_SCAN_CONF) + { + // Resume TxRing after SCANING complete. We hope the out-of-service time + // won't be too long to let upper layer time-out the waiting frames + RTMPResumeMsduTransmission(pAd); +#ifdef CCX_SUPPORT + if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) + { + // Cisco scan request is finished, prepare beacon report + MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL); + } +#endif // CCX_SUPPORT // + pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; + + // + // Check if we can connect to. + // + BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen); + if (pAd->MlmeAux.SsidBssTab.BssNr > 0) + { + MlmeAutoReconnectLastSSID(pAd); + } + } + break; +#endif // RT2870 // default: DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)", Elem->MsgType)); break; @@ -309,9 +341,11 @@ VOID CntlOidSsidProc( MLME_DISASSOC_REQ_STRUCT DisassocReq; ULONG Now; +#ifdef RT2860 // BBP and RF are not accessible in PS mode, we has to wake them up first if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) AsicForceWakeup(pAd, RTMP_HALT); +#endif // Step 1. record the desired user settings to MlmeAux NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID); @@ -1024,6 +1058,44 @@ VOID CntlWaitReassocProc( } } + +#ifdef RT2870 +VOID AdhocTurnOnQos( + IN PRTMP_ADAPTER pAd) +{ +#define AC0_DEF_TXOP 0 +#define AC1_DEF_TXOP 0 +#define AC2_DEF_TXOP 94 +#define AC3_DEF_TXOP 47 + + // Turn on QOs if use HT rate. + if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) + { + pAd->CommonCfg.APEdcaParm.bValid = TRUE; + pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3; + pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7; + pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1; + pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1; + + pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4; + pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4; + pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3; + pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2; + + pAd->CommonCfg.APEdcaParm.Cwmax[0] = 10; + pAd->CommonCfg.APEdcaParm.Cwmax[1] = 6; + pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4; + pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3; + + pAd->CommonCfg.APEdcaParm.Txop[0] = 0; + pAd->CommonCfg.APEdcaParm.Txop[1] = 0; + pAd->CommonCfg.APEdcaParm.Txop[2] = AC2_DEF_TXOP; + pAd->CommonCfg.APEdcaParm.Txop[3] = AC3_DEF_TXOP; + } + AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); +} +#endif /* RT2870 */ + /* ========================================================================== Description: @@ -1042,12 +1114,14 @@ VOID LinkUp( UCHAR Value = 0, idx; MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry; +#ifdef RT2860 if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) { RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); RTMPusecDelay(6000); pAd->bPCIclkOff = FALSE; } +#endif pEntry = &pAd->MacTab.Content[BSSID_WCID]; @@ -1072,6 +1146,7 @@ VOID LinkUp( //rt2860b. Don't know why need this SwitchBetweenWepAndCkip(pAd); +#ifdef RT2860 // Before power save before link up function, We will force use 1R. // So after link up, check Rx antenna # again. RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); @@ -1089,12 +1164,31 @@ VOID LinkUp( } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); pAd->StaCfg.BBPR3 = Value; +#endif /* RT2860 */ if (BssType == BSS_ADHOC) { OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON); +#ifdef RT30xx + if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) && + (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE)) + { + pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2; + } + else if ((pAd->CommonCfg.Channel > 2) && + (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) && + (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW)) + { + pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2; + } +#endif +#ifdef RT2870 + if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) + AdhocTurnOnQos(pAd); +#endif + DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" )); } else @@ -1129,7 +1223,9 @@ VOID LinkUp( RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); Value &= (~0x20); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); +#ifdef RT2860 pAd->StaCfg.BBPR3 = Value; +#endif RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); Data &= 0xfffffffe; @@ -1164,7 +1260,9 @@ VOID LinkUp( RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); Value |= (0x20); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); +#ifdef RT2860 pAd->StaCfg.BBPR3 = Value; +#endif if (pAd->MACVersion == 0x28600100) { @@ -1194,7 +1292,9 @@ VOID LinkUp( RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); Value &= (~0x20); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); +#ifdef RT2860 pAd->StaCfg.BBPR3 = Value; +#endif if (pAd->MACVersion == 0x28600100) { @@ -1384,7 +1484,9 @@ VOID LinkUp( IV |= (pAd->StaCfg.DefaultKeyId << 30); AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0); +#ifdef RT2860 RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); +#endif } // NOTE: // the decision of using "short slot time" or not may change dynamically due to @@ -1465,9 +1567,14 @@ VOID LinkUp( { pAd->IndicateMediaState = NdisMediaStateConnected; pAd->ExtraInfo = GENERAL_LINK_UP; +#ifdef RT2870 + RTMP_IndicateMediaState(pAd); +#endif } // -- +#ifdef RT2860 RTMP_IndicateMediaState(pAd); +#endif // Add BSSID in my MAC Table. NdisAcquireSpinLock(&pAd->MacTabLock); @@ -1478,6 +1585,9 @@ VOID LinkUp( pAd->MacTab.Size = 1; // infra mode always set MACtab size =1. pAd->MacTab.Content[BSSID_WCID].Sst = SST_ASSOC; pAd->MacTab.Content[BSSID_WCID].AuthState = SST_ASSOC; +#ifdef RT30xx + pAd->MacTab.Content[BSSID_WCID].AuthMode = pAd->StaCfg.AuthMode; +#endif pAd->MacTab.Content[BSSID_WCID].WepStatus = pAd->StaCfg.WepStatus; NdisReleaseSpinLock(&pAd->MacTabLock); @@ -1601,8 +1711,15 @@ VOID LinkUp( // Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable // // if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is. +#ifdef RT30xx + if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) && + (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)) + || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))) +#endif +#ifndef RT30xx if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))) || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))) +#endif { RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); Data &= 0xFFFFFF00; @@ -1684,7 +1801,9 @@ VOID LinkUp( } RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); +#ifdef RT2860 RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); +#endif } /* @@ -1717,17 +1836,21 @@ VOID LinkDown( IN BOOLEAN IsReqFromAP) { UCHAR i, ByteValue = 0; +#ifdef RT2860 BOOLEAN Cancelled; +#endif // Do nothing if monitor mode is on if (MONITOR_ON(pAd)) return; +#ifdef RT2860 RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); // Not allow go to sleep within linkdown function. RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); +#endif if (pAd->CommonCfg.bWirelessEvent) { @@ -1737,6 +1860,7 @@ VOID LinkDown( DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n")); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); +#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { BOOLEAN Cancelled; @@ -1753,6 +1877,7 @@ VOID LinkDown( } pAd->bPCIclkOff = FALSE; +#endif if (ADHOC_ON(pAd)) // Adhoc mode link down { DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n")); @@ -1898,13 +2023,18 @@ VOID LinkDown( // Update extra information to link is up pAd->ExtraInfo = GENERAL_LINK_DOWN; +#ifdef RT2860 pAd->StaCfg.AdhocBOnlyJoined = FALSE; pAd->StaCfg.AdhocBGJoined = FALSE; pAd->StaCfg.Adhoc20NJoined = FALSE; +#endif pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE; // Reset the Current AP's IP address NdisZeroMemory(pAd->StaCfg.AironetIPAddress, 4); +#ifdef RT2870 + pAd->bUsbTxBulkAggre = FALSE; +#endif // RT2870 // // Clean association information NdisZeroMemory(&pAd->StaCfg.AssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION)); @@ -1960,14 +2090,32 @@ VOID LinkDown( RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); +#ifdef RT2860 // Allow go to sleep after linkdown steps. RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); +#endif { union iwreq_data wrqu; memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN); wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); } + +#ifdef RT30xx + if (IS_RT3090(pAd)) + { + UINT32 macdata; + // disable MMPS BBP control register + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &ByteValue); + ByteValue &= ~(0x04); //bit 2 + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, ByteValue); + + // disable MMPS MAC control register + RTMP_IO_READ32(pAd, 0x1210, &macdata); + macdata &= ~(0x09); //bit 0, 3 + RTMP_IO_WRITE32(pAd, 0x1210, macdata); + } +#endif // RT30xx // } /* @@ -2173,21 +2321,61 @@ VOID AuthParmFill( ========================================================================== */ + + +#ifdef RT2870 + +VOID MlmeCntlConfirm( + IN PRTMP_ADAPTER pAd, + IN ULONG MsgType, + IN USHORT Msg) +{ + MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MsgType, sizeof(USHORT), &Msg); +} +#endif + VOID ComposePsPoll( IN PRTMP_ADAPTER pAd) { +#ifdef RT2870 + PTXINFO_STRUC pTxInfo; + PTXWI_STRUC pTxWI; + + DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n")); +#endif NdisZeroMemory(&pAd->PsPollFrame, sizeof(PSPOLL_FRAME)); + +#ifdef RT2870 + pAd->PsPollFrame.FC.PwrMgmt = 0; +#endif pAd->PsPollFrame.FC.Type = BTYPE_CNTL; pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL; pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000; COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid); COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress); + +#ifdef RT2870 + RTMPZeroMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0], 100); + pTxInfo = (PTXINFO_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0]; + RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(PSPOLL_FRAME)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE); + pTxWI = (PTXWI_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE]; + RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(PSPOLL_FRAME)), + 0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit); + RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->PsPollFrame, sizeof(PSPOLL_FRAME)); + // Append 4 extra zero bytes. + pAd->PsPollContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4; +#endif } // IRQL = DISPATCH_LEVEL VOID ComposeNullFrame( IN PRTMP_ADAPTER pAd) { +#ifdef RT2870 + PTXINFO_STRUC pTxInfo; + PTXWI_STRUC pTxWI; +#endif + NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11)); pAd->NullFrame.FC.Type = BTYPE_DATA; pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC; @@ -2195,6 +2383,16 @@ VOID ComposeNullFrame( COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid); COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress); COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid); +#ifdef RT2870 + RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], 100); + pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0]; + RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE); + pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE]; + RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)), + 0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit); + RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11)); + pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4; +#endif } diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c index b5cceaa3ae7b..b41ce230c501 100644 --- a/drivers/staging/rt2860/sta/rtmp_data.c +++ b/drivers/staging/rt2860/sta/rtmp_data.c @@ -74,6 +74,7 @@ VOID STARxEAPOLFrameIndicate( if (pAd->StaCfg.DesireSharedKey[idx].KeyLen > 0) { +#ifdef RT2860 MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[BSSID_WCID]; // Set key material and cipherAlg to Asic @@ -87,6 +88,32 @@ VOID STARxEAPOLFrameIndicate( pAd->IndicateMediaState = NdisMediaStateConnected; pAd->ExtraInfo = GENERAL_LINK_UP; +#endif +#ifdef RT2870 + union + { + char buf[sizeof(NDIS_802_11_WEP)+MAX_LEN_OF_KEY- 1]; + NDIS_802_11_WEP keyinfo; + } WepKey; + int len; + + + NdisZeroMemory(&WepKey, sizeof(WepKey)); + len =pAd->StaCfg.DesireSharedKey[idx].KeyLen; + + NdisMoveMemory(WepKey.keyinfo.KeyMaterial, + pAd->StaCfg.DesireSharedKey[idx].Key, + pAd->StaCfg.DesireSharedKey[idx].KeyLen); + + WepKey.keyinfo.KeyIndex = 0x80000000 + idx; + WepKey.keyinfo.KeyLength = len; + pAd->SharedKey[BSS0][idx].KeyLen =(UCHAR) (len <= 5 ? 5 : 13); + + pAd->IndicateMediaState = NdisMediaStateConnected; + pAd->ExtraInfo = GENERAL_LINK_UP; + // need to enqueue cmd to thread + RTUSBEnqueueCmdFromNdis(pAd, OID_802_11_ADD_WEP, TRUE, &WepKey, sizeof(WepKey.keyinfo) + len - 1); +#endif // RT2870 // // For Preventing ShardKey Table is cleared by remove key procedure. pAd->SharedKey[BSS0][idx].CipherAlg = CipherAlg; pAd->SharedKey[BSS0][idx].KeyLen = pAd->StaCfg.DesireSharedKey[idx].KeyLen; @@ -548,7 +575,13 @@ VOID STAHandleRxMgmtFrame( { // We should collect RSSI not only U2M data but also my beacon +#ifdef RT30xx + if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)) + && (pAd->RxAnt.EvaluatePeriod == 0)) +#endif +#ifndef RT30xx if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))) +#endif { Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI); @@ -556,6 +589,18 @@ VOID STAHandleRxMgmtFrame( pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1); } +#ifdef RT30xx + // collect rssi information for antenna diversity + if (pAd->NicConfig2.field.AntDiversity) + { + if ((pRxD->U2M) || ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)))) + { + COLLECT_RX_ANTENNA_AVERAGE_RSSI(pAd, ConvertToRssi(pAd, (UCHAR)pRxWI->RSSI0, RSSI_0), 0); //Note: RSSI2 not used on RT73 + pAd->StaCfg.NumOfAvgRssiSample ++; + } + } +#endif // RT30xx // + // First check the size, it MUST not exceed the mlme queue size if (pRxWI->MPDUtotalByteCount > MGMT_DMA_BUFFER_SIZE) { @@ -643,12 +688,14 @@ BOOLEAN STARxDoneInterruptHandle( break; } +#ifdef RT2860 if (RxProcessed++ > MAX_RX_PROCESS_CNT) { // need to reschedule rx handle bReschedule = TRUE; break; } +#endif RxProcessed ++; // test @@ -738,6 +785,7 @@ BOOLEAN STARxDoneInterruptHandle( } } +#ifdef RT2860 // fRTMP_PS_GO_TO_SLEEP_NOW is set if receiving beacon. if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW) && (INFRA_ON(pAd))) { @@ -745,6 +793,7 @@ BOOLEAN STARxDoneInterruptHandle( AsicSleepThenAutoWakeup(pAd, pAd->ThisTbttNumToNextWakeUp); bReschedule = FALSE; } +#endif return bReschedule; } @@ -762,7 +811,12 @@ BOOLEAN STARxDoneInterruptHandle( VOID RTMPHandleTwakeupInterrupt( IN PRTMP_ADAPTER pAd) { +#ifdef RT2860 AsicForceWakeup(pAd, DOT11POWERSAVE); +#endif +#ifdef RT2870 + AsicForceWakeup(pAd, FALSE); +#endif } /* @@ -1011,7 +1065,13 @@ NDIS_STATUS STASendPacket( // UserPriority = 0; QueIdx = QID_AC_BE; +#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)) +#endif +#ifdef RT2870 + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && + CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE)) +#endif { USHORT Protocol; UCHAR LlcSnapLen = 0, Byte0, Byte1; @@ -1075,7 +1135,12 @@ NDIS_STATUS STASendPacket( RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags); if ((pAd->CommonCfg.BACapability.field.AutoBA == TRUE)&& +#ifdef RT2860 (pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) +#endif +#ifdef RT2870 + IS_HT_STA(pEntry)) +#endif { if (((pEntry->TXBAbitmap & (1<BADeclineBitmap & (1<TxRing[QueIdx].TxSwFreeIdx > pAd->TxRing[QueIdx].TxCpuIdx) FreeNumber = pAd->TxRing[QueIdx].TxSwFreeIdx - pAd->TxRing[QueIdx].TxCpuIdx - 1; else @@ -1142,9 +1221,27 @@ NDIS_STATUS RTMPFreeTXDRequest( if (FreeNumber >= NumberRequired) Status = NDIS_STATUS_SUCCESS; +#endif +#ifdef RT2870 + { + pHTTXContext = &pAd->TxContext[QueIdx]; + RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags); + if ((pHTTXContext->CurWritePosition != pHTTXContext->ENextBulkOutPosition) || + (pHTTXContext->IRPPending == TRUE)) + { + Status = NDIS_STATUS_FAILURE; + } + else + { + Status = NDIS_STATUS_SUCCESS; + } + RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags); + } +#endif break; case QID_MGMT: +#ifdef RT2860 if (pAd->MgmtRing.TxSwFreeIdx > pAd->MgmtRing.TxCpuIdx) FreeNumber = pAd->MgmtRing.TxSwFreeIdx - pAd->MgmtRing.TxCpuIdx - 1; else @@ -1152,13 +1249,22 @@ NDIS_STATUS RTMPFreeTXDRequest( if (FreeNumber >= NumberRequired) Status = NDIS_STATUS_SUCCESS; +#endif +#ifdef RT2870 + if (pAd->MgmtRing.TxSwFreeIdx != MGMT_RING_SIZE) + Status = NDIS_STATUS_FAILURE; + else + Status = NDIS_STATUS_SUCCESS; +#endif break; default: DBGPRINT(RT_DEBUG_ERROR,("RTMPFreeTXDRequest::Invalid QueIdx(=%d)\n", QueIdx)); break; } +#ifdef RT2860 *FreeNumberIs = (UCHAR)FreeNumber; +#endif return (Status); } @@ -1689,7 +1795,9 @@ VOID STA_AMPDU_Frame_Tx( // // Kick out Tx // +#ifdef RT2860 if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) +#endif HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); pAd->RalinkCounters.KickTxCount++; @@ -1820,7 +1928,9 @@ VOID STA_AMSDU_Frame_Tx( // // Kick out Tx // +#ifdef RT2860 if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) +#endif HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } @@ -1940,7 +2050,9 @@ VOID STA_Legacy_Frame_Tx( // // Kick out Tx // +#ifdef RT2860 if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) +#endif HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } @@ -2051,7 +2163,9 @@ VOID STA_ARalink_Frame_Tx( // // Kick out Tx // +#ifdef RT2860 if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) +#endif HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } @@ -2320,7 +2434,12 @@ NDIS_STATUS STAHardTransmit( if ((pAd->StaCfg.Psm == PWR_SAVE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicForceWakeup At HardTx\n")); +#ifdef RT2860 AsicForceWakeup(pAd, FROM_TX); +#endif +#ifdef RT2870 + AsicForceWakeup(pAd, TRUE); +#endif } // It should not change PSM bit, when APSD turn on. diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c index 17dbe1dc2196..87b5e49cec54 100644 --- a/drivers/staging/rt2860/sta/sync.c +++ b/drivers/staging/rt2860/sta/sync.c @@ -37,6 +37,7 @@ */ #include "../rt_config.h" +#ifdef RT2860 #define AC0_DEF_TXOP 0 #define AC1_DEF_TXOP 0 #define AC2_DEF_TXOP 94 @@ -71,6 +72,10 @@ VOID AdhocTurnOnQos( } AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); } +#endif /* RT2860 */ +#ifdef RT2870 +#define ADHOC_ENTRY_BEACON_LOST_TIME (2*OS_HZ) // 2 sec +#endif /* ========================================================================== @@ -226,6 +231,7 @@ VOID MlmeScanReqAction( // Increase the scan retry counters. pAd->StaCfg.ScanCnt++; +#ifdef RT2860 if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && (IDLE_ON(pAd)) && (pAd->StaCfg.bRadio == TRUE) && @@ -233,6 +239,7 @@ VOID MlmeScanReqAction( { RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE); } +#endif // first check the parameter sanity if (MlmeScanReqSanity(pAd, @@ -345,6 +352,7 @@ VOID MlmeJoinReqAction( DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx)); +#ifdef RT2860 if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && (IDLE_ON(pAd)) && (pAd->StaCfg.bRadio == TRUE) && @@ -352,6 +360,7 @@ VOID MlmeJoinReqAction( { RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE); } +#endif // reset all the timers RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled); @@ -1107,6 +1116,10 @@ VOID PeerBeacon( // Add the safeguard against the mismatch of adhoc wep status if (pAd->StaCfg.WepStatus != pAd->ScanTab.BssEntry[Bssidx].WepStatus) { +#ifdef RT30xx + DBGPRINT(RT_DEBUG_TRACE, ("SYNC - Not matched wep status %d %d\n", pAd->StaCfg.WepStatus, pAd->ScanTab.BssEntry[Bssidx].WepStatus)); + DBGPRINT(RT_DEBUG_TRACE, ("bssid=%s\n", pAd->ScanTab.BssEntry[Bssidx].Bssid)); +#endif return; } @@ -1170,11 +1183,14 @@ VOID PeerBeacon( pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault; } +#ifdef RT2860 // at least one 11b peer joined. downgrade the MaxTxRate to 11Mbps // after last 11b peer left for several seconds, we'll auto switch back to 11G rate // in MlmePeriodicExec() +#endif if (ADHOC_ON(pAd) && (CAP_IS_IBSS_ON(CapabilityInfo))) { +#ifdef RT2860 BOOLEAN bRestart; BOOLEAN bnRestart; @@ -1359,6 +1375,79 @@ VOID PeerBeacon( } } } +#endif /* RT2860 */ +#ifdef RT2870 + UCHAR MaxSupportedRateIn500Kbps = 0; + UCHAR idx; + MAC_TABLE_ENTRY *pEntry; + + // supported rates array may not be sorted. sort it and find the maximum rate + for (idx=0; idxWcid == RESERVED_WCID)) || + (pEntry && ((pEntry->LastBeaconRxTime + ADHOC_ENTRY_BEACON_LOST_TIME) < Now))) + { + if (pEntry == NULL) + // Another adhoc joining, add to our MAC table. + pEntry = MacTableInsertEntry(pAd, Addr2, BSS0, FALSE); + + if (StaAddMacTableEntry(pAd, pEntry, MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo) == FALSE) + { + DBGPRINT(RT_DEBUG_TRACE, ("ADHOC - Add Entry failed.\n")); + return; + } + + if (pEntry && + (Elem->Wcid == RESERVED_WCID)) + { + idx = pAd->StaCfg.DefaultKeyId; + RT28XX_STA_SECURITY_INFO_ADD(pAd, BSS0, idx, pEntry); + } + } + + if (pEntry && pEntry->ValidAsCLI) + pEntry->LastBeaconRxTime = Now; + + // At least another peer in this IBSS, declare MediaState as CONNECTED + if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) + { + OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED); + + pAd->IndicateMediaState = NdisMediaStateConnected; + RTMP_IndicateMediaState(pAd); + pAd->ExtraInfo = GENERAL_LINK_UP; + AsicSetBssid(pAd, pAd->CommonCfg.Bssid); + + // 2003/03/12 - john + // Make sure this entry in "ScanTab" table, thus complies to Microsoft's policy that + // "site survey" result should always include the current connected network. + // + Bssidx = BssTableSearch(&pAd->ScanTab, Bssid, Channel); + if (Bssidx == BSS_NOT_FOUND) + { + Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod, + &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen, &HtCapability, + &AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, RealRssi, TimeStamp, 0, + &EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE); + } + DBGPRINT(RT_DEBUG_TRACE, ("ADHOC fOP_STATUS_MEDIA_STATE_CONNECTED.\n")); + } +#endif /* RT2870 */ } if (INFRA_ON(pAd)) @@ -1447,10 +1536,12 @@ VOID PeerBeacon( // 5. otherwise, put PHY back to sleep to save battery. if (MessageToMe) { +#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); } +#endif if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable && pAd->CommonCfg.bAPSDAC_BE && pAd->CommonCfg.bAPSDAC_BK && pAd->CommonCfg.bAPSDAC_VI && pAd->CommonCfg.bAPSDAC_VO) { @@ -1461,10 +1552,12 @@ VOID PeerBeacon( } else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM)) { +#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); } +#endif } else if ((pAd->TxSwQueue[QID_AC_BK].Number != 0) || (pAd->TxSwQueue[QID_AC_BE].Number != 0) || @@ -1478,10 +1571,12 @@ VOID PeerBeacon( { // TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme // can we cheat here (i.e. just check MGMT & AC_BE) for better performance? +#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); } +#endif } else { @@ -1496,9 +1591,14 @@ VOID PeerBeacon( if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { +#ifdef RT2860 // Set a flag to go to sleep . Then after parse this RxDoneInterrupt, will go to sleep mode. RTMP_SET_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); pAd->ThisTbttNumToNextWakeUp = TbttNumToNextWakeUp; +#endif +#ifdef RT2870 + AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp); +#endif } } } diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c index c906eea163d3..58274364d78c 100644 --- a/drivers/staging/rt2860/sta/wpa.c +++ b/drivers/staging/rt2860/sta/wpa.c @@ -1384,10 +1384,12 @@ VOID WpaGroupMsg1Action( pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP; else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES; +#ifndef RT30xx else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64; else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128; +#endif //hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK); } @@ -1764,7 +1766,12 @@ BOOLEAN ParseKeyData( // Get GTK length - refer to IEEE 802.11i-2004 p.82 GTKLEN = pKDE->Len -6; +#ifdef RT30xx + if (GTKLEN < LEN_AES_KEY) +#endif +#ifndef RT30xx if (GTKLEN < MIN_LEN_OF_GTK) +#endif { DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN)); return FALSE; @@ -1790,10 +1797,12 @@ BOOLEAN ParseKeyData( pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP; else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES; +#ifndef RT30xx else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64; else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128; +#endif return TRUE; -- 2.20.1