From 5f13bfac0718ce6f83ecba3755f224c3790e8d66 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Tue, 9 Mar 2010 16:56:10 +0900 Subject: [PATCH] ath5k: read eeprom IQ calibration values correctly for G mode we read the IQ correction values (i_cal and q_cal) for G mode from a wrong location (the same shifts as for A mode is applied which is incorrect). use correct locations, matching the docs and HAL sources. also we should write IQ correction only when we have that information in the EEPROM, starting from version 4. also write it in the same way as we do in the periodic recalibration (enable last), just to be sure. Signed-off-by: Bruno Randolf Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 4 ++-- drivers/net/wireless/ath/ath5k/reset.c | 15 +++++++++------ 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 6a3f4da7fb4..10b52262b23 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -429,8 +429,8 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; AR5K_EEPROM_READ(o++, val); - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + ee->ee_i_cal[mode] = (val >> 5) & 0x3f; + ee->ee_q_cal[mode] = val & 0x1f; if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { AR5K_EEPROM_READ(o++, val); diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index c780b55020d..cbf28e37984 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -851,12 +851,15 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, AR5K_INIT_CYCRSSI_THR1); - /* I/Q correction - * TODO: Per channel i/q infos ? */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CORR_ENABLE | - (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | - ee->ee_q_cal[ee_mode]); + /* I/Q correction (set enable bit last to match HAL sources) */ + /* TODO: Per channel i/q infos ? */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, + ee->ee_i_cal[ee_mode]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, + ee->ee_q_cal[ee_mode]); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE); + } /* Heavy clipping -disable for now */ if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1) -- 2.20.1