From 5ee80705a5339270538119d1e8721b365eac5202 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 11 Nov 2014 11:13:40 -0600 Subject: [PATCH] usb: dwc2: Update Kconfig to support dual-role Update DWC2 kconfig and makefile to support dual-role mode. The platform file will always get compiled for the case where the controller is directly connected to the CPU. So for loadable modules, dwc2.ko is built for host, peripheral, and dual-role mode. The PCI bus interface will be called dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. Signed-off-by: Dinh Nguyen Acked-by: Paul Zimmerman Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/Kconfig | 66 +++++++++++++++++++++++---------------- drivers/usb/dwc2/Makefile | 32 +++++++++---------- 2 files changed, 55 insertions(+), 43 deletions(-) diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index 4d027180cea1..b323c4c11b0a 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -1,5 +1,5 @@ config USB_DWC2 - bool "DesignWare USB2 DRD Core Support" + tristate "DesignWare USB2 DRD Core Support" depends on USB || USB_GADGET help Say Y here if your system has a Dual Role Hi-Speed USB @@ -10,49 +10,61 @@ config USB_DWC2 bus interface module (if you have a PCI bus system) will be called dwc2_pci.ko, and the platform interface module (for controllers directly connected to the CPU) will be called - dwc2_platform.ko. For gadget mode, there will be a single - module called dwc2_gadget.ko. - - NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The - host and gadget drivers are still currently separate drivers. - There are plans to merge the dwc2_gadget driver with the dwc2 - host driver in the near future to create a dual-role driver. + dwc2_platform.ko. For all modes(host, gadget and dual-role), there + will be an additional module named dwc2.ko. if USB_DWC2 +choice + bool "DWC2 Mode Selection" + default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET) + default USB_DWC2_HOST if (USB && !USB_GADGET) + default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET) + config USB_DWC2_HOST - tristate "Host only mode" + bool "Host only mode" depends on USB help The Designware USB2.0 high-speed host controller - integrated into many SoCs. + integrated into many SoCs. Select this option if you want the + driver to operate in Host-only mode. -config USB_DWC2_PLATFORM - bool "DWC2 Platform" - depends on USB_DWC2_HOST - default USB_DWC2_HOST +comment "Gadget/Dual-role mode requires USB Gadget support to be enabled" + +config USB_DWC2_PERIPHERAL + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_DWC2 + help + The Designware USB2.0 high-speed gadget controller + integrated into many SoCs. Select this option if you want the + driver to operate in Peripheral-only mode. This option requires + USB_GADGET to be enabled. + +config USB_DWC2_DUAL_ROLE + bool "Dual Role mode" + depends on (USB=y || USB=USB_DWC2) && (USB_GADGET=y || USB_GADGET=USB_DWC2) help - The Designware USB2.0 platform interface module for - controllers directly connected to the CPU. This is only - used for host mode. + Select this option if you want the driver to work in a dual-role + mode. In this mode both host and gadget features are enabled, and + the role will be determined by the cable that gets plugged-in. This + option requires USB_GADGET to be enabled. +endchoice + +config USB_DWC2_PLATFORM + tristate "DWC2 Platform" + default USB_DWC2_HOST || USB_DWC2_PERIPHERAL + help + The Designware USB2.0 platform interface module for + controllers directly connected to the CPU. config USB_DWC2_PCI - bool "DWC2 PCI" + tristate "DWC2 PCI" depends on USB_DWC2_HOST && PCI default USB_DWC2_HOST help The Designware USB2.0 PCI interface module for controllers connected to a PCI bus. This is only used for host mode. -comment "Gadget mode requires USB Gadget support to be enabled" - -config USB_DWC2_PERIPHERAL - tristate "Gadget only mode" - depends on USB_GADGET - help - The Designware USB2.0 high-speed gadget controller - integrated into many SoCs. - config USB_DWC2_DEBUG bool "Enable Debugging Messages" help diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index b73d2a527970..8f752679752a 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -1,28 +1,28 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG -obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o +obj-$(CONFIG_USB_DWC2) += dwc2.o dwc2-y := core.o core_intr.o -dwc2-y += hcd.o hcd_intr.o -dwc2-y += hcd_queue.o hcd_ddma.o + +ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += hcd.o hcd_intr.o + dwc2-y += hcd_queue.o hcd_ddma.o +endif + +ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += gadget.o +endif # NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to # this location and renamed gadget.c. When building for dynamically linked -# modules, dwc2_gadget.ko will get built for peripheral mode. For host mode, -# the core module will be dwc2.ko, the PCI bus interface module will called -# dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. -# At present the host and gadget driver will be separate drivers, but there -# are plans in the near future to create a dual-role driver. +# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role +# mode. The PCI bus interface module will called dwc2_pci.ko and the platform +# interface module will be called dwc2_platform.ko. ifneq ($(CONFIG_USB_DWC2_PCI),) - obj-$(CONFIG_USB_DWC2_HOST) += dwc2_pci.o + obj-$(CONFIG_USB_DWC2) += dwc2_pci.o dwc2_pci-y := pci.o endif -ifneq ($(CONFIG_USB_DWC2_PLATFORM),) - obj-$(CONFIG_USB_DWC2_HOST) += dwc2_platform.o - dwc2_platform-y := platform.o -endif - -obj-$(CONFIG_USB_DWC2_PERIPHERAL) += dwc2_gadget.o -dwc2_gadget-y := gadget.o +obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o +dwc2_platform-y := platform.o -- 2.20.1