From 5e7b911f9a3e582635801675b7fe935b16cd4af5 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 10 May 2012 16:57:28 -0500 Subject: [PATCH] drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers The THRESHOLDS register configures thresholds for two interrupts, but these interrupts are not used in the DIU driver. An early version of the driver may have used the "lines before vsync" interrupt, which requires the LS_BF_VS of THRESHOLDS to be initialized. Unfortunately, the initialization of this register does not do a read-modify-write to set only LS_BF_VS. On the MPC8610, the value written is correct. On other chips, like the P1022, the value overwrites some reserved bits. This results in a performance drop on the P1022. Since the default value is acceptable as-is on all SOCs, we should just avoid touching this register. Signed-off-by: Timur Tabi Signed-off-by: Florian Tobias Schandinat --- drivers/video/fsl-diu-fb.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index 6af3f16754f0..458c00664ade 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -834,7 +834,6 @@ static void update_lcdc(struct fb_info *info) diu_ops.set_pixel_clock(var->pixclock); out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */ - out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */ out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */ out_be32(&hw->plut, 0x01F5F666); -- 2.20.1