From 5d4a9fa692ce0fc9fff0a35e53b3a9be44b48da5 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 10 May 2012 12:13:10 +0300 Subject: [PATCH] wl18xx: add register table Add the register table with the appropriate values for wl18xx. Signed-off-by: Luciano Coelho Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl18xx/main.c | 23 ++++++ drivers/net/wireless/ti/wl18xx/reg.h | 112 ++++++++++++++++++++++++++ 2 files changed, 135 insertions(+) create mode 100644 drivers/net/wireless/ti/wl18xx/reg.h diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index f3a164a9d294..88fd93485175 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -25,6 +25,8 @@ #include "../wlcore/wlcore.h" #include "../wlcore/debug.h" +#include "reg.h" + static struct wlcore_ops wl18xx_ops = { }; @@ -62,6 +64,26 @@ static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = { }, }; +static const int wl18xx_rtable[REG_TABLE_LEN] = { + [REG_ECPU_CONTROL] = WL18XX_REG_ECPU_CONTROL, + [REG_INTERRUPT_NO_CLEAR] = WL18XX_REG_INTERRUPT_NO_CLEAR, + [REG_INTERRUPT_ACK] = WL18XX_REG_INTERRUPT_ACK, + [REG_COMMAND_MAILBOX_PTR] = WL18XX_REG_COMMAND_MAILBOX_PTR, + [REG_EVENT_MAILBOX_PTR] = WL18XX_REG_EVENT_MAILBOX_PTR, + [REG_INTERRUPT_TRIG] = WL18XX_REG_INTERRUPT_TRIG_H, + [REG_INTERRUPT_MASK] = WL18XX_REG_INTERRUPT_MASK, + [REG_PC_ON_RECOVERY] = 0, /* TODO: where is the PC? */ + [REG_CHIP_ID_B] = WL18XX_REG_CHIP_ID_B, + [REG_CMD_MBOX_ADDRESS] = WL18XX_CMD_MBOX_ADDRESS, + + /* data access memory addresses, used with partition translation */ + [REG_SLV_MEM_DATA] = WL18XX_SLV_MEM_DATA, + [REG_SLV_REG_DATA] = WL18XX_SLV_REG_DATA, + + /* raw data access memory addresses */ + [REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR, +}; + int __devinit wl18xx_probe(struct platform_device *pdev) { struct wl1271 *wl; @@ -76,6 +98,7 @@ int __devinit wl18xx_probe(struct platform_device *pdev) wl = hw->priv; wl->ops = &wl18xx_ops; wl->ptable = wl18xx_ptable; + wl->rtable = wl18xx_rtable; return wlcore_probe(wl, pdev); } diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h new file mode 100644 index 000000000000..9af0c83727d6 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/reg.h @@ -0,0 +1,112 @@ +/* + * This file is part of wlcore + * + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __REG_H__ +#define __REG_H__ + +#define WL18XX_REGISTERS_BASE 0x00800000 +#define WL18XX_CODE_BASE 0x00000000 +#define WL18XX_DATA_BASE 0x00400000 +#define WL18XX_DOUBLE_BUFFER_BASE 0x00600000 +#define WL18XX_MCU_KEY_SEARCH_BASE 0x00700000 +#define WL18XX_PHY_BASE 0x00900000 +#define WL18XX_TOP_OCP_BASE 0x00A00000 +#define WL18XX_PACKET_RAM_BASE 0x00B00000 +#define WL18XX_HOST_BASE 0x00C00000 + +#define WL18XX_REGISTERS_DOWN_SIZE 0x0000B000 + +#define WL18XX_REG_BOOT_PART_START 0x00802000 +#define WL18XX_REG_BOOT_PART_SIZE 0x00014578 + +#define WL18XX_PHY_INIT_MEM_ADDR 0x80926000 + +#define WL18XX_SDIO_WSPI_BASE (WL18XX_REGISTERS_BASE) +#define WL18XX_REG_CONFIG_BASE (WL18XX_REGISTERS_BASE + 0x02000) +#define WL18XX_WGCM_REGS_BASE (WL18XX_REGISTERS_BASE + 0x03000) +#define WL18XX_ENC_BASE (WL18XX_REGISTERS_BASE + 0x04000) +#define WL18XX_INTERRUPT_BASE (WL18XX_REGISTERS_BASE + 0x05000) +#define WL18XX_UART_BASE (WL18XX_REGISTERS_BASE + 0x06000) +#define WL18XX_WELP_BASE (WL18XX_REGISTERS_BASE + 0x07000) +#define WL18XX_TCP_CKSM_BASE (WL18XX_REGISTERS_BASE + 0x08000) +#define WL18XX_FIFO_BASE (WL18XX_REGISTERS_BASE + 0x09000) +#define WL18XX_OCP_BRIDGE_BASE (WL18XX_REGISTERS_BASE + 0x0A000) +#define WL18XX_PMAC_RX_BASE (WL18XX_REGISTERS_BASE + 0x14800) +#define WL18XX_PMAC_ACM_BASE (WL18XX_REGISTERS_BASE + 0x14C00) +#define WL18XX_PMAC_TX_BASE (WL18XX_REGISTERS_BASE + 0x15000) +#define WL18XX_PMAC_CSR_BASE (WL18XX_REGISTERS_BASE + 0x15400) + +#define WL18XX_REG_ECPU_CONTROL (WL18XX_REGISTERS_BASE + 0x02004) +#define WL18XX_REG_INTERRUPT_NO_CLEAR (WL18XX_REGISTERS_BASE + 0x050E8) +#define WL18XX_REG_INTERRUPT_ACK (WL18XX_REGISTERS_BASE + 0x050F0) +#define WL18XX_REG_INTERRUPT_TRIG (WL18XX_REGISTERS_BASE + 0x5074) +#define WL18XX_REG_INTERRUPT_TRIG_H (WL18XX_REGISTERS_BASE + 0x5078) +#define WL18XX_REG_INTERRUPT_MASK (WL18XX_REGISTERS_BASE + 0x0050DC) + +#define WL18XX_REG_CHIP_ID_B (WL18XX_REGISTERS_BASE + 0x01542C) + +#define WL18XX_SLV_MEM_DATA (WL18XX_HOST_BASE + 0x0018) +#define WL18XX_SLV_REG_DATA (WL18XX_HOST_BASE + 0x0008) + +/* Scratch Pad registers*/ +#define WL18XX_SCR_PAD0 (WL18XX_REGISTERS_BASE + 0x0154EC) +#define WL18XX_SCR_PAD1 (WL18XX_REGISTERS_BASE + 0x0154F0) +#define WL18XX_SCR_PAD2 (WL18XX_REGISTERS_BASE + 0x0154F4) +#define WL18XX_SCR_PAD3 (WL18XX_REGISTERS_BASE + 0x0154F8) +#define WL18XX_SCR_PAD4 (WL18XX_REGISTERS_BASE + 0x0154FC) +#define WL18XX_SCR_PAD4_SET (WL18XX_REGISTERS_BASE + 0x015504) +#define WL18XX_SCR_PAD4_CLR (WL18XX_REGISTERS_BASE + 0x015500) +#define WL18XX_SCR_PAD5 (WL18XX_REGISTERS_BASE + 0x015508) +#define WL18XX_SCR_PAD5_SET (WL18XX_REGISTERS_BASE + 0x015510) +#define WL18XX_SCR_PAD5_CLR (WL18XX_REGISTERS_BASE + 0x01550C) +#define WL18XX_SCR_PAD6 (WL18XX_REGISTERS_BASE + 0x015514) +#define WL18XX_SCR_PAD7 (WL18XX_REGISTERS_BASE + 0x015518) +#define WL18XX_SCR_PAD8 (WL18XX_REGISTERS_BASE + 0x01551C) +#define WL18XX_SCR_PAD9 (WL18XX_REGISTERS_BASE + 0x015520) + +/* Spare registers*/ +#define WL18XX_SPARE_A1 (WL18XX_REGISTERS_BASE + 0x002194) +#define WL18XX_SPARE_A2 (WL18XX_REGISTERS_BASE + 0x002198) +#define WL18XX_SPARE_A3 (WL18XX_REGISTERS_BASE + 0x00219C) +#define WL18XX_SPARE_A4 (WL18XX_REGISTERS_BASE + 0x0021A0) +#define WL18XX_SPARE_A5 (WL18XX_REGISTERS_BASE + 0x0021A4) +#define WL18XX_SPARE_A6 (WL18XX_REGISTERS_BASE + 0x0021A8) +#define WL18XX_SPARE_A7 (WL18XX_REGISTERS_BASE + 0x0021AC) +#define WL18XX_SPARE_A8 (WL18XX_REGISTERS_BASE + 0x0021B0) +#define WL18XX_SPARE_B1 (WL18XX_REGISTERS_BASE + 0x015524) +#define WL18XX_SPARE_B2 (WL18XX_REGISTERS_BASE + 0x015528) +#define WL18XX_SPARE_B3 (WL18XX_REGISTERS_BASE + 0x01552C) +#define WL18XX_SPARE_B4 (WL18XX_REGISTERS_BASE + 0x015530) +#define WL18XX_SPARE_B5 (WL18XX_REGISTERS_BASE + 0x015534) +#define WL18XX_SPARE_B6 (WL18XX_REGISTERS_BASE + 0x015538) +#define WL18XX_SPARE_B7 (WL18XX_REGISTERS_BASE + 0x01553C) +#define WL18XX_SPARE_B8 (WL18XX_REGISTERS_BASE + 0x015540) + +#define WL18XX_REG_COMMAND_MAILBOX_PTR (WL18XX_SCR_PAD0) +#define WL18XX_REG_EVENT_MAILBOX_PTR (WL18XX_SCR_PAD1) + +#define WL18XX_CMD_MBOX_ADDRESS 0xB007B4 + +#define WL18XX_FW_STATUS_ADDR 0x50F8 + +#define CHIP_ID_185x_PG10 (0x06030101) + +#endif /* __REG_H__ */ -- 2.20.1