From 5bdb48b501e8366d5fd361cd402816aa3e525895 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 7 Jun 2016 18:59:21 +0300 Subject: [PATCH] serial: max310x: Fix RS485 handling RS485 IOCTLs uses spinlocks, so move regmap functions into a separate work queue. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/max310x.c | 41 ++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 14 deletions(-) diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 3f6e0ab725fe..bf6e3e08ec67 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -262,6 +262,7 @@ struct max310x_one { struct uart_port port; struct work_struct tx_work; struct work_struct md_work; + struct work_struct rs_work; }; struct max310x_port { @@ -877,36 +878,45 @@ static void max310x_set_termios(struct uart_port *port, uart_update_timeout(port, termios->c_cflag, baud); } -static int max310x_rs485_config(struct uart_port *port, - struct serial_rs485 *rs485) +static void max310x_rs_proc(struct work_struct *ws) { + struct max310x_one *one = container_of(ws, struct max310x_one, rs_work); unsigned int val; - if (rs485->delay_rts_before_send > 0x0f || - rs485->delay_rts_after_send > 0x0f) - return -ERANGE; + val = (one->port.rs485.delay_rts_before_send << 4) | + one->port.rs485.delay_rts_after_send; + max310x_port_write(&one->port, MAX310X_HDPIXDELAY_REG, val); - val = (rs485->delay_rts_before_send << 4) | - rs485->delay_rts_after_send; - max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val); - if (rs485->flags & SER_RS485_ENABLED) { - max310x_port_update(port, MAX310X_MODE1_REG, + if (one->port.rs485.flags & SER_RS485_ENABLED) { + max310x_port_update(&one->port, MAX310X_MODE1_REG, MAX310X_MODE1_TRNSCVCTRL_BIT, MAX310X_MODE1_TRNSCVCTRL_BIT); - max310x_port_update(port, MAX310X_MODE2_REG, + max310x_port_update(&one->port, MAX310X_MODE2_REG, MAX310X_MODE2_ECHOSUPR_BIT, MAX310X_MODE2_ECHOSUPR_BIT); } else { - max310x_port_update(port, MAX310X_MODE1_REG, + max310x_port_update(&one->port, MAX310X_MODE1_REG, MAX310X_MODE1_TRNSCVCTRL_BIT, 0); - max310x_port_update(port, MAX310X_MODE2_REG, + max310x_port_update(&one->port, MAX310X_MODE2_REG, MAX310X_MODE2_ECHOSUPR_BIT, 0); } +} + +static int max310x_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct max310x_one *one = container_of(port, struct max310x_one, port); + + if ((rs485->delay_rts_before_send > 0x0f) || + (rs485->delay_rts_after_send > 0x0f)) + return -ERANGE; rs485->flags &= SER_RS485_RTS_ON_SEND | SER_RS485_ENABLED; memset(rs485->padding, 0, sizeof(rs485->padding)); port->rs485 = *rs485; + schedule_work(&one->rs_work); + return 0; } @@ -1214,8 +1224,10 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, MAX310X_MODE1_IRQSEL_BIT); /* Initialize queue for start TX */ INIT_WORK(&s->p[i].tx_work, max310x_wq_proc); - /* Initialize queue for changing mode */ + /* Initialize queue for changing LOOPBACK mode */ INIT_WORK(&s->p[i].md_work, max310x_md_proc); + /* Initialize queue for changing RS485 mode */ + INIT_WORK(&s->p[i].rs_work, max310x_rs_proc); /* Register port */ uart_add_one_port(&s->uart, &s->p[i].port); /* Go to suspend mode */ @@ -1257,6 +1269,7 @@ static int max310x_remove(struct device *dev) for (i = 0; i < s->uart.nr; i++) { cancel_work_sync(&s->p[i].tx_work); cancel_work_sync(&s->p[i].md_work); + cancel_work_sync(&s->p[i].rs_work); uart_remove_one_port(&s->uart, &s->p[i].port); s->devtype->power(&s->p[i].port, 0); } -- 2.20.1