From 5ad6e6c50899621030a9b10ddcb2fcd349cb5965 Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Fri, 3 Oct 2014 12:25:01 -0700 Subject: [PATCH] net: bcmgenet: improve bcmgenet_mii_setup() bcmgenet_mii_setup() is called from the PHY state machine every 1-2 seconds when the PHYs are in PHY_POLL mode. Improve bcmgenet_mii_setup() so that it touches the MAC registers only when the link is up and there was a change to link, speed, duplex, or pause status. Signed-off-by: Petri Gynther Tested-by: Florian Fainelli Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/genet/bcmgenet.c | 3 +- .../net/ethernet/broadcom/genet/bcmgenet.h | 3 +- drivers/net/ethernet/broadcom/genet/bcmmii.c | 73 +++++++++++-------- 3 files changed, 48 insertions(+), 31 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index d51729c619c0..e0a6238a74b4 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2162,9 +2162,10 @@ static void bcmgenet_netif_stop(struct net_device *dev) */ cancel_work_sync(&priv->bcmgenet_irq_work); - priv->old_pause = -1; priv->old_link = -1; + priv->old_speed = -1; priv->old_duplex = -1; + priv->old_pause = -1; } static int bcmgenet_close(struct net_device *dev) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index ad95fe57ebcd..321b1db8c14b 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -548,8 +548,9 @@ struct bcmgenet_priv { u16 gphy_rev; /* PHY device variables */ - int old_duplex; int old_link; + int old_speed; + int old_duplex; int old_pause; phy_interface_t phy_interface; int phy_addr; diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 75b26cbaa7c1..9ff799a9f801 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -82,24 +82,33 @@ static void bcmgenet_mii_setup(struct net_device *dev) struct bcmgenet_priv *priv = netdev_priv(dev); struct phy_device *phydev = priv->phydev; u32 reg, cmd_bits = 0; - unsigned int status_changed = 0; + bool status_changed = false; if (priv->old_link != phydev->link) { - status_changed = 1; + status_changed = true; priv->old_link = phydev->link; } if (phydev->link) { - /* program UMAC and RGMII block based on established link - * speed, pause, and duplex. - * the speed set in umac->cmd tell RGMII block which clock - * 25MHz(100Mbps)/125MHz(1Gbps) to use for transmit. - * receive clock is provided by PHY. - */ - reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); - reg &= ~OOB_DISABLE; - reg |= RGMII_LINK; - bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + /* check speed/duplex/pause changes */ + if (priv->old_speed != phydev->speed) { + status_changed = true; + priv->old_speed = phydev->speed; + } + + if (priv->old_duplex != phydev->duplex) { + status_changed = true; + priv->old_duplex = phydev->duplex; + } + + if (priv->old_pause != phydev->pause) { + status_changed = true; + priv->old_pause = phydev->pause; + } + + /* done if nothing has changed */ + if (!status_changed) + return; /* speed */ if (phydev->speed == SPEED_1000) @@ -110,36 +119,39 @@ static void bcmgenet_mii_setup(struct net_device *dev) cmd_bits = UMAC_SPEED_10; cmd_bits <<= CMD_SPEED_SHIFT; - if (priv->old_duplex != phydev->duplex) { - status_changed = 1; - priv->old_duplex = phydev->duplex; - } - /* duplex */ if (phydev->duplex != DUPLEX_FULL) cmd_bits |= CMD_HD_EN; - if (priv->old_pause != phydev->pause) { - status_changed = 1; - priv->old_pause = phydev->pause; - } - /* pause capability */ if (!phydev->pause) cmd_bits |= CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE; - } - if (!status_changed) - return; + /* + * Program UMAC and RGMII block based on established + * link speed, duplex, and pause. The speed set in + * umac->cmd tell RGMII block which clock to use for + * transmit -- 25MHz(100Mbps) or 125MHz(1Gbps). + * Receive clock is provided by the PHY. + */ + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg &= ~OOB_DISABLE; + reg |= RGMII_LINK; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); - if (phydev->link) { reg = bcmgenet_umac_readl(priv, UMAC_CMD); reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) | CMD_HD_EN | CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE); reg |= cmd_bits; bcmgenet_umac_writel(priv, reg, UMAC_CMD); + } else { + /* done if nothing has changed */ + if (!status_changed) + return; + /* needed for MoCA fixed PHY to reflect correct link status */ + netif_carrier_off(dev); } phy_print_status(phydev); @@ -318,6 +330,12 @@ static int bcmgenet_mii_probe(struct net_device *dev) /* Communicate the integrated PHY revision */ phy_flags = priv->gphy_rev; + /* Initialize link state variables that bcmgenet_mii_setup() uses */ + priv->old_link = -1; + priv->old_speed = -1; + priv->old_duplex = -1; + priv->old_pause = -1; + phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, phy_flags, priv->phy_interface); if (!phydev) { @@ -325,9 +343,6 @@ static int bcmgenet_mii_probe(struct net_device *dev) return -ENODEV; } - priv->old_link = -1; - priv->old_duplex = -1; - priv->old_pause = -1; priv->phydev = phydev; /* Configure port multiplexer based on what the probed PHY device since -- 2.20.1