From 5a1e1456fc633da5291285b1fff75d2a7507375b Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 5 Dec 2013 15:20:50 +0800 Subject: [PATCH] usb: chipidea: fix nobody cared IRQ when booting with host role If we connect Male-A-To-Male-A cable between otg-host and host pc, the ci->vbus_active is set wrongly, and cause the controller run at peripheral mode when we load gadget module (ci_udc_start will be run), but the software runs at host mode due to id = 0. The ehci_irq can't handle suspend (USBi_SLI) interrupt which is enabled for peripheral mode, it causes no one will handle irq error. This patch is needed for 3.12 stable Cc: stable Acked-by: Michael Grzeschik Reported-by: Marc Kleine-Budde Tested-by: Marc Kleine-Budde Signed-off-by: Marc Kleine-Budde Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 4 ++++ drivers/usb/chipidea/udc.c | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 5d8981c5235e..6e73f8cd60e5 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -642,6 +642,10 @@ static int ci_hdrc_probe(struct platform_device *pdev) : CI_ROLE_GADGET; } + /* only update vbus status for peripheral */ + if (ci->role == CI_ROLE_GADGET) + ci_handle_vbus_change(ci); + ret = ci_role_start(ci, ci->role); if (ret) { dev_err(dev, "can't start %s role\n", ci_role(ci)->name); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index b34c81969cba..69d20fbb38a2 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1795,9 +1795,6 @@ static int udc_start(struct ci_hdrc *ci) pm_runtime_no_callbacks(&ci->gadget.dev); pm_runtime_enable(&ci->gadget.dev); - /* Update ci->vbus_active */ - ci_handle_vbus_change(ci); - return retval; destroy_eps: -- 2.20.1