From 59c7dd3dc37dc42339406d08f1cde4d6194a4ccf Mon Sep 17 00:00:00 2001 From: Ivan Martinez Date: Thu, 12 Feb 2009 15:47:34 -0800 Subject: [PATCH] Staging: comedi: add cb_pcidas driver For MeasurementComputing PCI-DAS series with the AMCC S5933 PCI controller From: Ivan Martinez Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/cb_pcidas.c | 1828 ++++++++++++++++++++ 1 file changed, 1828 insertions(+) create mode 100644 drivers/staging/comedi/drivers/cb_pcidas.c diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c new file mode 100644 index 000000000000..63c8a802f599 --- /dev/null +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -0,0 +1,1828 @@ +/* + comedi/drivers/cb_pcidas.c + + Developed by Ivan Martinez and Frank Mori Hess, with valuable help from + David Schleef and the rest of the Comedi developers comunity. + + Copyright (C) 2001-2003 Ivan Martinez + Copyright (C) 2001,2002 Frank Mori Hess + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1997-8 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +************************************************************************ +*/ +/* +Driver: cb_pcidas +Description: MeasurementComputing PCI-DAS series with the AMCC S5933 PCI controller +Author: Ivan Martinez , + Frank Mori Hess +Updated: 2003-3-11 +Devices: [Measurement Computing] PCI-DAS1602/16 (cb_pcidas), + PCI-DAS1602/16jr, PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, + PCI-DAS1000, PCI-DAS1001, PCI_DAS1002 + +Status: + There are many reports of the driver being used with most of the + supported cards. Despite no detailed log is maintained, it can + be said that the driver is quite tested and stable. + + The boards may be autocalibrated using the comedi_calibrate + utility. + +Configuration options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. + +For commands, the scanned channels must be consecutive +(i.e. 4-5-6-7, 2-3-4,...), and must all have the same +range and aref. +*/ +/* + +TODO: + +analog triggering on 1602 series +*/ + +#include "../comedidev.h" +#include + +#include "8253.h" +#include "8255.h" +#include "amcc_s5933.h" +#include "comedi_pci.h" +#include "comedi_fc.h" + +#undef CB_PCIDAS_DEBUG // disable debugging code +//#define CB_PCIDAS_DEBUG // enable debugging code + +// PCI vendor number of ComputerBoards/MeasurementComputing +#define PCI_VENDOR_ID_CB 0x1307 +#define TIMER_BASE 100 // 10MHz master clock +#define AI_BUFFER_SIZE 1024 // maximum fifo size of any supported board +#define AO_BUFFER_SIZE 1024 // maximum fifo size of any supported board +#define NUM_CHANNELS_8800 8 +#define NUM_CHANNELS_7376 1 +#define NUM_CHANNELS_8402 2 +#define NUM_CHANNELS_DAC08 1 + +/* PCI-DAS base addresses */ + +// indices of base address regions +#define S5933_BADRINDEX 0 +#define CONT_STAT_BADRINDEX 1 +#define ADC_FIFO_BADRINDEX 2 +#define PACER_BADRINDEX 3 +#define AO_BADRINDEX 4 +// sizes of io regions +#define CONT_STAT_SIZE 10 +#define ADC_FIFO_SIZE 4 +#define PACER_SIZE 12 +#define AO_SIZE 4 + +/* Control/Status registers */ +#define INT_ADCFIFO 0 // INTERRUPT / ADC FIFO register +#define INT_EOS 0x1 // interrupt end of scan +#define INT_FHF 0x2 // interrupt fifo half full +#define INT_FNE 0x3 // interrupt fifo not empty +#define INT_MASK 0x3 // mask of interrupt select bits +#define INTE 0x4 // interrupt enable +#define DAHFIE 0x8 // dac half full interrupt enable +#define EOAIE 0x10 // end of aquisition interrupt enable +#define DAHFI 0x20 // dac half full read status / write interrupt clear +#define EOAI 0x40 // read end of acq. interrupt status / write clear +#define INT 0x80 // read interrupt status / write clear +#define EOBI 0x200 // read end of burst interrupt status +#define ADHFI 0x400 // read half-full interrupt status +#define ADNEI 0x800 // read fifo not empty interrupt latch status +#define ADNE 0x1000 // read, fifo not empty (realtime, not latched) status +#define DAEMIE 0x1000 // write, dac empty interrupt enable +#define LADFUL 0x2000 // read fifo overflow / write clear +#define DAEMI 0x4000 // dac fifo empty interrupt status / write clear + +#define ADCMUX_CONT 2 // ADC CHANNEL MUX AND CONTROL register +#define BEGIN_SCAN(x) ((x) & 0xf) +#define END_SCAN(x) (((x) & 0xf) << 4) +#define GAIN_BITS(x) (((x) & 0x3) << 8) +#define UNIP 0x800 // Analog front-end unipolar for range +#define SE 0x400 // Inputs in single-ended mode +#define PACER_MASK 0x3000 // pacer source bits +#define PACER_INT 0x1000 // internal pacer +#define PACER_EXT_FALL 0x2000 // external falling edge +#define PACER_EXT_RISE 0x3000 // external rising edge +#define EOC 0x4000 // adc not busy + +#define TRIG_CONTSTAT 4 // TRIGGER CONTROL/STATUS register +#define SW_TRIGGER 0x1 // software start trigger +#define EXT_TRIGGER 0x2 // external start trigger +#define ANALOG_TRIGGER 0x3 // external analog trigger +#define TRIGGER_MASK 0x3 // mask of bits that determine start trigger +#define TGEN 0x10 // enable external start trigger +#define BURSTE 0x20 // burst mode enable +#define XTRCL 0x80 // clear external trigger + +#define CALIBRATION_REG 6 // CALIBRATION register +#define SELECT_8800_BIT 0x100 // select 8800 caldac +#define SELECT_TRIMPOT_BIT 0x200 // select ad7376 trim pot +#define SELECT_DAC08_BIT 0x400 // select dac08 caldac +#define CAL_SRC_BITS(x) (((x) & 0x7) << 11) +#define CAL_EN_BIT 0x4000 // read calibration source instead of analog input channel 0 +#define SERIAL_DATA_IN_BIT 0x8000 // serial data stream going to 8800 and 7376 + +#define DAC_CSR 0x8 // dac control and status register +enum dac_csr_bits { + DACEN = 0x2, // dac enable + DAC_MODE_UPDATE_BOTH = 0x80, // update both dacs when dac0 is written +}; +static inline unsigned int DAC_RANGE(unsigned int channel, unsigned int range) +{ + return (range & 0x3) << (8 + 2 * (channel & 0x1)); +} +static inline unsigned int DAC_RANGE_MASK(unsigned int channel) +{ + return 0x3 << (8 + 2 * (channel & 0x1)); +}; + +// bits for 1602 series only +enum dac_csr_bits_1602 { + DAC_EMPTY = 0x1, // dac fifo empty, read, write clear + DAC_START = 0x4, // start/arm dac fifo operations + DAC_PACER_MASK = 0x18, // bits that set dac pacer source + DAC_PACER_INT = 0x8, // dac internal pacing + DAC_PACER_EXT_FALL = 0x10, // dac external pacing, falling edge + DAC_PACER_EXT_RISE = 0x18, // dac external pacing, rising edge +}; +static inline unsigned int DAC_CHAN_EN(unsigned int channel) +{ + return 1 << (5 + (channel & 0x1)); // enable channel 0 or 1 +}; + +/* analog input fifo */ +#define ADCDATA 0 // ADC DATA register +#define ADCFIFOCLR 2 // ADC FIFO CLEAR + +// pacer, counter, dio registers +#define ADC8254 0 +#define DIO_8255 4 +#define DAC8254 8 + +// analog output registers for 100x, 1200 series +static inline unsigned int DAC_DATA_REG(unsigned int channel) +{ + return 2 * (channel & 0x1); +} + +/* analog output registers for 1602 series*/ +#define DACDATA 0 // DAC DATA register +#define DACFIFOCLR 2 // DAC FIFO CLEAR + +// bit in hexadecimal representation of range index that indicates unipolar input range +#define IS_UNIPOLAR 0x4 +// analog input ranges for most boards +static const comedi_lrange cb_pcidas_ranges = { + 8, + { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } +}; + +// pci-das1001 input ranges +static const comedi_lrange cb_pcidas_alt_ranges = { + 8, + { + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.01), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01) + } +}; + +// analog output ranges +static const comedi_lrange cb_pcidas_ao_ranges = { + 4, + { + BIP_RANGE(5), + BIP_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(10), + } +}; + +enum trimpot_model { + AD7376, + AD8402, +}; + +typedef struct cb_pcidas_board_struct { + const char *name; + unsigned short device_id; + int ai_se_chans; // Inputs in single-ended mode + int ai_diff_chans; // Inputs in differential mode + int ai_bits; // analog input resolution + int ai_speed; // fastest conversion period in ns + int ao_nchan; // number of analog out channels + int has_ao_fifo; // analog output has fifo + int ao_scan_speed; // analog output speed for 1602 series (for a scan, not conversion) + int fifo_size; // number of samples fifo can hold + const comedi_lrange *ranges; + enum trimpot_model trimpot; + unsigned has_dac08:1; +} cb_pcidas_board; + +static const cb_pcidas_board cb_pcidas_boards[] = { + { + name: "pci-das1602/16", + device_id:0x1, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 16, + ai_speed:5000, + ao_nchan:2, + has_ao_fifo:1, + ao_scan_speed:10000, + fifo_size:512, + ranges: &cb_pcidas_ranges, + trimpot: AD8402, + has_dac08:1, + }, + { + name: "pci-das1200", + device_id:0xF, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 12, + ai_speed:3200, + ao_nchan:2, + has_ao_fifo:0, + fifo_size:1024, + ranges: &cb_pcidas_ranges, + trimpot: AD7376, + has_dac08:0, + }, + { + name: "pci-das1602/12", + device_id:0x10, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 12, + ai_speed:3200, + ao_nchan:2, + has_ao_fifo:1, + ao_scan_speed:4000, + fifo_size:1024, + ranges: &cb_pcidas_ranges, + trimpot: AD7376, + has_dac08:0, + }, + { + name: "pci-das1200/jr", + device_id:0x19, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 12, + ai_speed:3200, + ao_nchan:0, + has_ao_fifo:0, + fifo_size:1024, + ranges: &cb_pcidas_ranges, + trimpot: AD7376, + has_dac08:0, + }, + { + name: "pci-das1602/16/jr", + device_id:0x1C, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 16, + ai_speed:5000, + ao_nchan:0, + has_ao_fifo:0, + fifo_size:512, + ranges: &cb_pcidas_ranges, + trimpot: AD8402, + has_dac08:1, + }, + { + name: "pci-das1000", + device_id:0x4C, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 12, + ai_speed:4000, + ao_nchan:0, + has_ao_fifo:0, + fifo_size:1024, + ranges: &cb_pcidas_ranges, + trimpot: AD7376, + has_dac08:0, + }, + { + name: "pci-das1001", + device_id:0x1a, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 12, + ai_speed:6800, + ao_nchan:2, + has_ao_fifo:0, + fifo_size:1024, + ranges: &cb_pcidas_alt_ranges, + trimpot: AD7376, + has_dac08:0, + }, + { + name: "pci-das1002", + device_id:0x1b, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 12, + ai_speed:6800, + ao_nchan:2, + has_ao_fifo:0, + fifo_size:1024, + ranges: &cb_pcidas_ranges, + trimpot: AD7376, + has_dac08:0, + }, +}; + +// Number of boards in cb_pcidas_boards +#define N_BOARDS (sizeof(cb_pcidas_boards) / sizeof(cb_pcidas_board)) + +static DEFINE_PCI_DEVICE_TABLE(cb_pcidas_pci_table) = { + {PCI_VENDOR_ID_CB, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_CB, 0x000f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_CB, 0x0010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_CB, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_CB, 0x001c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_CB, 0x004c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_CB, 0x001a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_CB, 0x001b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, cb_pcidas_pci_table); + +/* + * Useful for shorthand access to the particular board structure + */ +#define thisboard ((const cb_pcidas_board *)dev->board_ptr) + +/* this structure is for data unique to this hardware driver. If + several hardware drivers keep similar information in this structure, + feel free to suggest moving the variable to the comedi_device struct. */ +typedef struct { + /* would be useful for a PCI device */ + struct pci_dev *pci_dev; + // base addresses + unsigned long s5933_config; + unsigned long control_status; + unsigned long adc_fifo; + unsigned long pacer_counter_dio; + unsigned long ao_registers; + // divisors of master clock for analog input pacing + unsigned int divisor1; + unsigned int divisor2; + volatile unsigned int count; // number of analog input samples remaining + volatile unsigned int adc_fifo_bits; // bits to write to interupt/adcfifo register + volatile unsigned int s5933_intcsr_bits; // bits to write to amcc s5933 interrupt control/status register + volatile unsigned int ao_control_bits; // bits to write to ao control and status register + sampl_t ai_buffer[AI_BUFFER_SIZE]; + sampl_t ao_buffer[AO_BUFFER_SIZE]; + // divisors of master clock for analog output pacing + unsigned int ao_divisor1; + unsigned int ao_divisor2; + volatile unsigned int ao_count; // number of analog output samples remaining + int ao_value[2]; // remember what the analog outputs are set to, to allow readback + unsigned int caldac_value[NUM_CHANNELS_8800]; // for readback of caldac + unsigned int trimpot_value[NUM_CHANNELS_8402]; // for readback of trimpot + unsigned int dac08_value; + unsigned int calibration_source; +} cb_pcidas_private; + +/* + * most drivers define the following macro to make it easy to + * access the private structure. + */ +#define devpriv ((cb_pcidas_private *)dev->private) + +/* + * The comedi_driver structure tells the Comedi core module + * which functions to call to configure/deconfigure (attach/detach) + * the board, and also about the kernel module that contains + * the device code. + */ +static int cb_pcidas_attach(comedi_device * dev, comedi_devconfig * it); +static int cb_pcidas_detach(comedi_device * dev); +static comedi_driver driver_cb_pcidas = { + driver_name:"cb_pcidas", + module:THIS_MODULE, + attach:cb_pcidas_attach, + detach:cb_pcidas_detach, +}; + +static int cb_pcidas_ai_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int ai_config_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int cb_pcidas_ao_nofifo_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int cb_pcidas_ao_fifo_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int cb_pcidas_ao_readback_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int cb_pcidas_ai_cmd(comedi_device * dev, comedi_subdevice * s); +static int cb_pcidas_ai_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd); +static int cb_pcidas_ao_cmd(comedi_device * dev, comedi_subdevice * s); +static int cb_pcidas_ao_inttrig(comedi_device * dev, comedi_subdevice * subdev, + unsigned int trig_num); +static int cb_pcidas_ao_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd); +static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG); +static void handle_ao_interrupt(comedi_device * dev, unsigned int status); +static int cb_pcidas_cancel(comedi_device * dev, comedi_subdevice * s); +static int cb_pcidas_ao_cancel(comedi_device * dev, comedi_subdevice * s); +static void cb_pcidas_load_counters(comedi_device * dev, unsigned int *ns, + int round_flags); +static int eeprom_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int caldac_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int caldac_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int trimpot_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int cb_pcidas_trimpot_write(comedi_device * dev, unsigned int channel, + lsampl_t value); +static int trimpot_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int dac08_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int dac08_write(comedi_device * dev, lsampl_t value); +static int dac08_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int caldac_8800_write(comedi_device * dev, unsigned int address, + uint8_t value); +static int trimpot_7376_write(comedi_device * dev, uint8_t value); +static int trimpot_8402_write(comedi_device * dev, unsigned int channel, + uint8_t value); +static int nvram_read(comedi_device * dev, unsigned int address, + uint8_t * data); + +static inline unsigned int cal_enable_bits(comedi_device * dev) +{ + return CAL_EN_BIT | CAL_SRC_BITS(devpriv->calibration_source); +} + +/* + * Attach is called by the Comedi core to configure the driver + * for a particular board. + */ +static int cb_pcidas_attach(comedi_device * dev, comedi_devconfig * it) +{ + comedi_subdevice *s; + struct pci_dev *pcidev; + int index; + int i; + + printk("comedi%d: cb_pcidas: ", dev->minor); + +/* + * Allocate the private structure area. + */ + if (alloc_private(dev, sizeof(cb_pcidas_private)) < 0) + return -ENOMEM; + +/* + * Probe the device to determine what device in the series it is. + */ + printk("\n"); + + for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + pcidev != NULL; + pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { + // is it not a computer boards card? + if (pcidev->vendor != PCI_VENDOR_ID_CB) + continue; + // loop through cards supported by this driver + for (index = 0; index < N_BOARDS; index++) { + if (cb_pcidas_boards[index].device_id != pcidev->device) + continue; + // was a particular bus/slot requested? + if (it->options[0] || it->options[1]) { + // are we on the wrong bus/slot? + if (pcidev->bus->number != it->options[0] || + PCI_SLOT(pcidev->devfn) != + it->options[1]) { + continue; + } + } + devpriv->pci_dev = pcidev; + dev->board_ptr = cb_pcidas_boards + index; + goto found; + } + } + + printk("No supported ComputerBoards/MeasurementComputing card found on " + "requested position\n"); + return -EIO; + + found: + + printk("Found %s on bus %i, slot %i\n", cb_pcidas_boards[index].name, + pcidev->bus->number, PCI_SLOT(pcidev->devfn)); + + /* + * Enable PCI device and reserve I/O ports. + */ + if (comedi_pci_enable(pcidev, "cb_pcidas")) { + printk(" Failed to enable PCI device and request regions\n"); + return -EIO; + } + /* + * Initialize devpriv->control_status and devpriv->adc_fifo to point to + * their base address. + */ + devpriv->s5933_config = + pci_resource_start(devpriv->pci_dev, S5933_BADRINDEX); + devpriv->control_status = + pci_resource_start(devpriv->pci_dev, CONT_STAT_BADRINDEX); + devpriv->adc_fifo = + pci_resource_start(devpriv->pci_dev, ADC_FIFO_BADRINDEX); + devpriv->pacer_counter_dio = + pci_resource_start(devpriv->pci_dev, PACER_BADRINDEX); + if (thisboard->ao_nchan) { + devpriv->ao_registers = + pci_resource_start(devpriv->pci_dev, AO_BADRINDEX); + } + // disable and clear interrupts on amcc s5933 + outl(INTCSR_INBOX_INTR_STATUS, + devpriv->s5933_config + AMCC_OP_REG_INTCSR); + + // get irq + if (comedi_request_irq(devpriv->pci_dev->irq, cb_pcidas_interrupt, + IRQF_SHARED, "cb_pcidas", dev)) { + printk(" unable to allocate irq %d\n", devpriv->pci_dev->irq); + return -EINVAL; + } + dev->irq = devpriv->pci_dev->irq; + + //Initialize dev->board_name + dev->board_name = thisboard->name; + +/* + * Allocate the subdevice structures. + */ + if (alloc_subdevices(dev, 7) < 0) + return -ENOMEM; + + s = dev->subdevices + 0; + /* analog input subdevice */ + dev->read_subdev = s; + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; + /* WARNING: Number of inputs in differential mode is ignored */ + s->n_chan = thisboard->ai_se_chans; + s->len_chanlist = thisboard->ai_se_chans; + s->maxdata = (1 << thisboard->ai_bits) - 1; + s->range_table = thisboard->ranges; + s->insn_read = cb_pcidas_ai_rinsn; + s->insn_config = ai_config_insn; + s->do_cmd = cb_pcidas_ai_cmd; + s->do_cmdtest = cb_pcidas_ai_cmdtest; + s->cancel = cb_pcidas_cancel; + + /* analog output subdevice */ + s = dev->subdevices + 1; + if (thisboard->ao_nchan) { + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND; + s->n_chan = thisboard->ao_nchan; + // analog out resolution is the same as analog input resolution, so use ai_bits + s->maxdata = (1 << thisboard->ai_bits) - 1; + s->range_table = &cb_pcidas_ao_ranges; + s->insn_read = cb_pcidas_ao_readback_insn; + if (thisboard->has_ao_fifo) { + dev->write_subdev = s; + s->subdev_flags |= SDF_CMD_WRITE; + s->insn_write = cb_pcidas_ao_fifo_winsn; + s->do_cmdtest = cb_pcidas_ao_cmdtest; + s->do_cmd = cb_pcidas_ao_cmd; + s->cancel = cb_pcidas_ao_cancel; + } else { + s->insn_write = cb_pcidas_ao_nofifo_winsn; + } + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + /* 8255 */ + s = dev->subdevices + 2; + subdev_8255_init(dev, s, NULL, devpriv->pacer_counter_dio + DIO_8255); + + // serial EEPROM, + s = dev->subdevices + 3; + s->type = COMEDI_SUBD_MEMORY; + s->subdev_flags = SDF_READABLE | SDF_INTERNAL; + s->n_chan = 256; + s->maxdata = 0xff; + s->insn_read = eeprom_read_insn; + + // 8800 caldac + s = dev->subdevices + 4; + s->type = COMEDI_SUBD_CALIB; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; + s->n_chan = NUM_CHANNELS_8800; + s->maxdata = 0xff; + s->insn_read = caldac_read_insn; + s->insn_write = caldac_write_insn; + for (i = 0; i < s->n_chan; i++) + caldac_8800_write(dev, i, s->maxdata / 2); + + // trim potentiometer + s = dev->subdevices + 5; + s->type = COMEDI_SUBD_CALIB; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; + if (thisboard->trimpot == AD7376) { + s->n_chan = NUM_CHANNELS_7376; + s->maxdata = 0x7f; + } else { + s->n_chan = NUM_CHANNELS_8402; + s->maxdata = 0xff; + } + s->insn_read = trimpot_read_insn; + s->insn_write = trimpot_write_insn; + for (i = 0; i < s->n_chan; i++) + cb_pcidas_trimpot_write(dev, i, s->maxdata / 2); + + // dac08 caldac + s = dev->subdevices + 6; + if (thisboard->has_dac08) { + s->type = COMEDI_SUBD_CALIB; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; + s->n_chan = NUM_CHANNELS_DAC08; + s->insn_read = dac08_read_insn; + s->insn_write = dac08_write_insn; + s->maxdata = 0xff; + dac08_write(dev, s->maxdata / 2); + } else + s->type = COMEDI_SUBD_UNUSED; + + // make sure mailbox 4 is empty + inl(devpriv->s5933_config + AMCC_OP_REG_IMB4); + /* Set bits to enable incoming mailbox interrupts on amcc s5933. */ + devpriv->s5933_intcsr_bits = + INTCSR_INBOX_BYTE(3) | INTCSR_INBOX_SELECT(3) | + INTCSR_INBOX_FULL_INT; + // clear and enable interrupt on amcc s5933 + outl(devpriv->s5933_intcsr_bits | INTCSR_INBOX_INTR_STATUS, + devpriv->s5933_config + AMCC_OP_REG_INTCSR); + + return 1; +} + +/* + * cb_pcidas_detach is called to deconfigure a device. It should deallocate + * resources. + * This function is also called when _attach() fails, so it should be + * careful not to release resources that were not necessarily + * allocated by _attach(). dev->private and dev->subdevices are + * deallocated automatically by the core. + */ +static int cb_pcidas_detach(comedi_device * dev) +{ + printk("comedi%d: cb_pcidas: remove\n", dev->minor); + + if (devpriv) { + if (devpriv->s5933_config) { + // disable and clear interrupts on amcc s5933 + outl(INTCSR_INBOX_INTR_STATUS, + devpriv->s5933_config + AMCC_OP_REG_INTCSR); +#ifdef CB_PCIDAS_DEBUG + rt_printk("detaching, incsr is 0x%x\n", + inl(devpriv->s5933_config + + AMCC_OP_REG_INTCSR)); +#endif + } + } + if (dev->irq) + comedi_free_irq(dev->irq, dev); + if (dev->subdevices) + subdev_8255_cleanup(dev, dev->subdevices + 2); + if (devpriv && devpriv->pci_dev) { + if (devpriv->s5933_config) { + comedi_pci_disable(devpriv->pci_dev); + } + pci_dev_put(devpriv->pci_dev); + } + + return 0; +} + +/* + * "instructions" read/write data in "one-shot" or "software-triggered" + * mode. + */ +static int cb_pcidas_ai_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int n, i; + unsigned int bits; + static const int timeout = 10000; + int channel; + // enable calibration input if appropriate + if (insn->chanspec & CR_ALT_SOURCE) { + outw(cal_enable_bits(dev), + devpriv->control_status + CALIBRATION_REG); + channel = 0; + } else { + outw(0, devpriv->control_status + CALIBRATION_REG); + channel = CR_CHAN(insn->chanspec); + } + // set mux limits and gain + bits = BEGIN_SCAN(channel) | + END_SCAN(channel) | GAIN_BITS(CR_RANGE(insn->chanspec)); + // set unipolar/bipolar + if (CR_RANGE(insn->chanspec) & IS_UNIPOLAR) + bits |= UNIP; + // set singleended/differential + if (CR_AREF(insn->chanspec) != AREF_DIFF) + bits |= SE; + outw(bits, devpriv->control_status + ADCMUX_CONT); + + /* clear fifo */ + outw(0, devpriv->adc_fifo + ADCFIFOCLR); + + /* convert n samples */ + for (n = 0; n < insn->n; n++) { + /* trigger conversion */ + outw(0, devpriv->adc_fifo + ADCDATA); + + /* wait for conversion to end */ + /* return -ETIMEDOUT if there is a timeout */ + for (i = 0; i < timeout; i++) { + if (inw(devpriv->control_status + ADCMUX_CONT) & EOC) + break; + } + if (i == timeout) + return -ETIMEDOUT; + + /* read data */ + data[n] = inw(devpriv->adc_fifo + ADCDATA); + } + + /* return the number of samples read/written */ + return n; +} + +static int ai_config_calibration_source(comedi_device * dev, lsampl_t * data) +{ + static const int num_calibration_sources = 8; + lsampl_t source = data[1]; + + if (source >= num_calibration_sources) { + printk("invalid calibration source: %i\n", source); + return -EINVAL; + } + + devpriv->calibration_source = source; + + return 2; +} + +static int ai_config_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int id = data[0]; + + switch (id) { + case INSN_CONFIG_ALT_SOURCE: + return ai_config_calibration_source(dev, data); + break; + default: + return -EINVAL; + break; + } + return -EINVAL; +} + +// analog output insn for pcidas-1000 and 1200 series +static int cb_pcidas_ao_nofifo_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int channel; + unsigned long flags; + + // set channel and range + channel = CR_CHAN(insn->chanspec); + comedi_spin_lock_irqsave(&dev->spinlock, flags); + devpriv->ao_control_bits &= + ~DAC_MODE_UPDATE_BOTH & ~DAC_RANGE_MASK(channel); + devpriv->ao_control_bits |= + DACEN | DAC_RANGE(channel, CR_RANGE(insn->chanspec)); + outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // remember value for readback + devpriv->ao_value[channel] = data[0]; + // send data + outw(data[0], devpriv->ao_registers + DAC_DATA_REG(channel)); + + return 1; +} + +// analog output insn for pcidas-1602 series +static int cb_pcidas_ao_fifo_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int channel; + unsigned long flags; + + // clear dac fifo + outw(0, devpriv->ao_registers + DACFIFOCLR); + + // set channel and range + channel = CR_CHAN(insn->chanspec); + comedi_spin_lock_irqsave(&dev->spinlock, flags); + devpriv->ao_control_bits &= + ~DAC_CHAN_EN(0) & ~DAC_CHAN_EN(1) & ~DAC_RANGE_MASK(channel) & + ~DAC_PACER_MASK; + devpriv->ao_control_bits |= + DACEN | DAC_RANGE(channel, + CR_RANGE(insn->chanspec)) | DAC_CHAN_EN(channel) | DAC_START; + outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // remember value for readback + devpriv->ao_value[channel] = data[0]; + // send data + outw(data[0], devpriv->ao_registers + DACDATA); + + return 1; +} + +// analog output readback insn +// XXX loses track of analog output value back after an analog ouput command is executed +static int cb_pcidas_ao_readback_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = devpriv->ao_value[CR_CHAN(insn->chanspec)]; + + return 1; +} + +static int eeprom_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + uint8_t nvram_data; + int retval; + + retval = nvram_read(dev, CR_CHAN(insn->chanspec), &nvram_data); + if (retval < 0) + return retval; + + data[0] = nvram_data; + + return 1; +} + +static int caldac_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + const unsigned int channel = CR_CHAN(insn->chanspec); + + return caldac_8800_write(dev, channel, data[0]); +} + +static int caldac_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = devpriv->caldac_value[CR_CHAN(insn->chanspec)]; + + return 1; +} + +/* 1602/16 pregain offset */ +static int dac08_write(comedi_device * dev, lsampl_t value) +{ + if (devpriv->dac08_value == value) + return 1; + + devpriv->dac08_value = value; + + outw(cal_enable_bits(dev) | (value & 0xff), + devpriv->control_status + CALIBRATION_REG); + comedi_udelay(1); + outw(cal_enable_bits(dev) | SELECT_DAC08_BIT | (value & 0xff), + devpriv->control_status + CALIBRATION_REG); + comedi_udelay(1); + outw(cal_enable_bits(dev) | (value & 0xff), + devpriv->control_status + CALIBRATION_REG); + comedi_udelay(1); + + return 1; +} + +static int dac08_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + return dac08_write(dev, data[0]); +} + +static int dac08_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = devpriv->dac08_value; + + return 1; +} + +static int cb_pcidas_trimpot_write(comedi_device * dev, + unsigned int channel, lsampl_t value) +{ + if (devpriv->trimpot_value[channel] == value) + return 1; + + devpriv->trimpot_value[channel] = value; + switch (thisboard->trimpot) { + case AD7376: + trimpot_7376_write(dev, value); + break; + case AD8402: + trimpot_8402_write(dev, channel, value); + break; + default: + comedi_error(dev, "driver bug?"); + return -1; + break; + } + + return 1; +} + +static int trimpot_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + unsigned int channel = CR_CHAN(insn->chanspec); + + return cb_pcidas_trimpot_write(dev, channel, data[0]); +} + +static int trimpot_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + unsigned int channel = CR_CHAN(insn->chanspec); + + data[0] = devpriv->trimpot_value[channel]; + + return 1; +} + +static int cb_pcidas_ai_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + int i, gain, start_chan; + + /* cmdtest tests a particular command to see if it is valid. + * Using the cmdtest ioctl, a user can create a valid cmd + * and then have it executes by the cmd ioctl. + * + * cmdtest returns 1,2,3,4 or 0, depending on which tests + * the command passes. */ + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW | TRIG_EXT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_FOLLOW | TRIG_TIMER | TRIG_EXT; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_TIMER | TRIG_NOW | TRIG_EXT; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) + err++; + if (cmd->scan_begin_src != TRIG_FOLLOW && + cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_EXT) + err++; + if (cmd->convert_src != TRIG_TIMER && + cmd->convert_src != TRIG_EXT && cmd->convert_src != TRIG_NOW) + err++; + if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE) + err++; + + // make sure trigger sources are compatible with each other + if (cmd->scan_begin_src == TRIG_FOLLOW && cmd->convert_src == TRIG_NOW) + err++; + if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->convert_src != TRIG_NOW) + err++; + if (cmd->start_src == TRIG_EXT && + (cmd->convert_src == TRIG_EXT + || cmd->scan_begin_src == TRIG_EXT)) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + + if (cmd->scan_begin_src == TRIG_TIMER) { + if (cmd->scan_begin_arg < + thisboard->ai_speed * cmd->chanlist_len) { + cmd->scan_begin_arg = + thisboard->ai_speed * cmd->chanlist_len; + err++; + } + } + if (cmd->convert_src == TRIG_TIMER) { + if (cmd->convert_arg < thisboard->ai_speed) { + cmd->convert_arg = thisboard->ai_speed; + err++; + } + } + + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + if (cmd->stop_src == TRIG_NONE) { + /* TRIG_NONE */ + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + if (cmd->scan_begin_src == TRIG_TIMER) { + tmp = cmd->scan_begin_arg; + i8253_cascade_ns_to_timer_2div(TIMER_BASE, + &(devpriv->divisor1), &(devpriv->divisor2), + &(cmd->scan_begin_arg), cmd->flags & TRIG_ROUND_MASK); + if (tmp != cmd->scan_begin_arg) + err++; + } + if (cmd->convert_src == TRIG_TIMER) { + tmp = cmd->convert_arg; + i8253_cascade_ns_to_timer_2div(TIMER_BASE, + &(devpriv->divisor1), &(devpriv->divisor2), + &(cmd->convert_arg), cmd->flags & TRIG_ROUND_MASK); + if (tmp != cmd->convert_arg) + err++; + } + + if (err) + return 4; + + // check channel/gain list against card's limitations + if (cmd->chanlist) { + gain = CR_RANGE(cmd->chanlist[0]); + start_chan = CR_CHAN(cmd->chanlist[0]); + for (i = 1; i < cmd->chanlist_len; i++) { + if (CR_CHAN(cmd->chanlist[i]) != + (start_chan + i) % s->n_chan) { + comedi_error(dev, + "entries in chanlist must be consecutive channels, counting upwards\n"); + err++; + } + if (CR_RANGE(cmd->chanlist[i]) != gain) { + comedi_error(dev, + "entries in chanlist must all have the same gain\n"); + err++; + } + } + } + + if (err) + return 5; + + return 0; +} + +static int cb_pcidas_ai_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_async *async = s->async; + comedi_cmd *cmd = &async->cmd; + unsigned int bits; + unsigned long flags; + + // make sure CAL_EN_BIT is disabled + outw(0, devpriv->control_status + CALIBRATION_REG); + // initialize before settings pacer source and count values + outw(0, devpriv->control_status + TRIG_CONTSTAT); + // clear fifo + outw(0, devpriv->adc_fifo + ADCFIFOCLR); + + // set mux limits, gain and pacer source + bits = BEGIN_SCAN(CR_CHAN(cmd->chanlist[0])) | + END_SCAN(CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])) | + GAIN_BITS(CR_RANGE(cmd->chanlist[0])); + // set unipolar/bipolar + if (CR_RANGE(cmd->chanlist[0]) & IS_UNIPOLAR) + bits |= UNIP; + // set singleended/differential + if (CR_AREF(cmd->chanlist[0]) != AREF_DIFF) + bits |= SE; + // set pacer source + if (cmd->convert_src == TRIG_EXT || cmd->scan_begin_src == TRIG_EXT) + bits |= PACER_EXT_RISE; + else + bits |= PACER_INT; + outw(bits, devpriv->control_status + ADCMUX_CONT); + +#ifdef CB_PCIDAS_DEBUG + rt_printk("comedi: sent 0x%x to adcmux control\n", bits); +#endif + + // load counters + if (cmd->convert_src == TRIG_TIMER) + cb_pcidas_load_counters(dev, &cmd->convert_arg, + cmd->flags & TRIG_ROUND_MASK); + else if (cmd->scan_begin_src == TRIG_TIMER) + cb_pcidas_load_counters(dev, &cmd->scan_begin_arg, + cmd->flags & TRIG_ROUND_MASK); + + // set number of conversions + if (cmd->stop_src == TRIG_COUNT) { + devpriv->count = cmd->chanlist_len * cmd->stop_arg; + } + // enable interrupts + comedi_spin_lock_irqsave(&dev->spinlock, flags); + devpriv->adc_fifo_bits |= INTE; + devpriv->adc_fifo_bits &= ~INT_MASK; + if (cmd->flags & TRIG_WAKE_EOS) { + if (cmd->convert_src == TRIG_NOW && cmd->chanlist_len > 1) + devpriv->adc_fifo_bits |= INT_EOS; // interrupt end of burst + else + devpriv->adc_fifo_bits |= INT_FNE; // interrupt fifo not empty + } else { + devpriv->adc_fifo_bits |= INT_FHF; //interrupt fifo half full + } +#ifdef CB_PCIDAS_DEBUG + rt_printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits); +#endif + // enable (and clear) interrupts + outw(devpriv->adc_fifo_bits | EOAI | INT | LADFUL, + devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // set start trigger and burst mode + bits = 0; + if (cmd->start_src == TRIG_NOW) + bits |= SW_TRIGGER; + else if (cmd->start_src == TRIG_EXT) + bits |= EXT_TRIGGER | TGEN | XTRCL; + else { + comedi_error(dev, "bug!"); + return -1; + } + if (cmd->convert_src == TRIG_NOW && cmd->chanlist_len > 1) + bits |= BURSTE; + outw(bits, devpriv->control_status + TRIG_CONTSTAT); +#ifdef CB_PCIDAS_DEBUG + rt_printk("comedi: sent 0x%x to trig control\n", bits); +#endif + + return 0; +} + +static int cb_pcidas_ao_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + + /* cmdtest tests a particular command to see if it is valid. + * Using the cmdtest ioctl, a user can create a valid cmd + * and then have it executes by the cmd ioctl. + * + * cmdtest returns 1,2,3,4 or 0, depending on which tests + * the command passes. */ + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_INT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_NOW; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + if (cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_EXT) + err++; + if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + + if (cmd->scan_begin_src == TRIG_TIMER) { + if (cmd->scan_begin_arg < thisboard->ao_scan_speed) { + cmd->scan_begin_arg = thisboard->ao_scan_speed; + err++; + } + } + + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + if (cmd->stop_src == TRIG_NONE) { + /* TRIG_NONE */ + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + if (cmd->scan_begin_src == TRIG_TIMER) { + tmp = cmd->scan_begin_arg; + i8253_cascade_ns_to_timer_2div(TIMER_BASE, + &(devpriv->ao_divisor1), &(devpriv->ao_divisor2), + &(cmd->scan_begin_arg), cmd->flags & TRIG_ROUND_MASK); + if (tmp != cmd->scan_begin_arg) + err++; + } + + if (err) + return 4; + + // check channel/gain list against card's limitations + if (cmd->chanlist && cmd->chanlist_len > 1) { + if (CR_CHAN(cmd->chanlist[0]) != 0 || + CR_CHAN(cmd->chanlist[1]) != 1) { + comedi_error(dev, + "channels must be ordered channel 0, channel 1 in chanlist\n"); + err++; + } + } + + if (err) + return 5; + + return 0; +} + +static int cb_pcidas_ao_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_async *async = s->async; + comedi_cmd *cmd = &async->cmd; + unsigned int i; + unsigned long flags; + + // set channel limits, gain + comedi_spin_lock_irqsave(&dev->spinlock, flags); + for (i = 0; i < cmd->chanlist_len; i++) { + // enable channel + devpriv->ao_control_bits |= + DAC_CHAN_EN(CR_CHAN(cmd->chanlist[i])); + // set range + devpriv->ao_control_bits |= DAC_RANGE(CR_CHAN(cmd->chanlist[i]), + CR_RANGE(cmd->chanlist[i])); + } + + // disable analog out before settings pacer source and count values + outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // clear fifo + outw(0, devpriv->ao_registers + DACFIFOCLR); + + // load counters + if (cmd->scan_begin_src == TRIG_TIMER) { + i8253_cascade_ns_to_timer_2div(TIMER_BASE, + &(devpriv->ao_divisor1), &(devpriv->ao_divisor2), + &(cmd->scan_begin_arg), cmd->flags); + + /* Write the values of ctr1 and ctr2 into counters 1 and 2 */ + i8254_load(devpriv->pacer_counter_dio + DAC8254, 0, 1, + devpriv->ao_divisor1, 2); + i8254_load(devpriv->pacer_counter_dio + DAC8254, 0, 2, + devpriv->ao_divisor2, 2); + } + // set number of conversions + if (cmd->stop_src == TRIG_COUNT) { + devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg; + } + // set pacer source + comedi_spin_lock_irqsave(&dev->spinlock, flags); + switch (cmd->scan_begin_src) { + case TRIG_TIMER: + devpriv->ao_control_bits |= DAC_PACER_INT; + break; + case TRIG_EXT: + devpriv->ao_control_bits |= DAC_PACER_EXT_RISE; + break; + default: + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + comedi_error(dev, "error setting dac pacer source"); + return -1; + break; + } + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + async->inttrig = cb_pcidas_ao_inttrig; + + return 0; +} + +static int cb_pcidas_ao_inttrig(comedi_device * dev, comedi_subdevice * s, + unsigned int trig_num) +{ + unsigned int num_bytes, num_points = thisboard->fifo_size; + comedi_async *async = s->async; + comedi_cmd *cmd = &s->async->cmd; + unsigned long flags; + + if (trig_num != 0) + return -EINVAL; + + // load up fifo + if (cmd->stop_src == TRIG_COUNT && devpriv->ao_count < num_points) + num_points = devpriv->ao_count; + + num_bytes = cfc_read_array_from_buffer(s, devpriv->ao_buffer, + num_points * sizeof(sampl_t)); + num_points = num_bytes / sizeof(sampl_t); + + if (cmd->stop_src == TRIG_COUNT) { + devpriv->ao_count -= num_points; + } + // write data to board's fifo + outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer, num_bytes); + + // enable dac half-full and empty interrupts + comedi_spin_lock_irqsave(&dev->spinlock, flags); + devpriv->adc_fifo_bits |= DAEMIE | DAHFIE; +#ifdef CB_PCIDAS_DEBUG + rt_printk("comedi: adc_fifo_bits are 0x%x\n", devpriv->adc_fifo_bits); +#endif + // enable and clear interrupts + outw(devpriv->adc_fifo_bits | DAEMI | DAHFI, + devpriv->control_status + INT_ADCFIFO); + + // start dac + devpriv->ao_control_bits |= DAC_START | DACEN | DAC_EMPTY; + outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); +#ifdef CB_PCIDAS_DEBUG + rt_printk("comedi: sent 0x%x to dac control\n", + devpriv->ao_control_bits); +#endif + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + async->inttrig = NULL; + + return 0; +} + +static irqreturn_t cb_pcidas_interrupt(int irq, void *d PT_REGS_ARG) +{ + comedi_device *dev = (comedi_device *) d; + comedi_subdevice *s = dev->read_subdev; + comedi_async *async; + int status, s5933_status; + int half_fifo = thisboard->fifo_size / 2; + unsigned int num_samples, i; + static const int timeout = 10000; + unsigned long flags; + + if (dev->attached == 0) { + return IRQ_NONE; + } + + async = s->async; + async->events = 0; + + s5933_status = inl(devpriv->s5933_config + AMCC_OP_REG_INTCSR); +#ifdef CB_PCIDAS_DEBUG + rt_printk("intcsr 0x%x\n", s5933_status); + rt_printk("mbef 0x%x\n", inl(devpriv->s5933_config + AMCC_OP_REG_MBEF)); +#endif + + if ((INTCSR_INTR_ASSERTED & s5933_status) == 0) + return IRQ_NONE; + + // make sure mailbox 4 is empty + inl_p(devpriv->s5933_config + AMCC_OP_REG_IMB4); + // clear interrupt on amcc s5933 + outl(devpriv->s5933_intcsr_bits | INTCSR_INBOX_INTR_STATUS, + devpriv->s5933_config + AMCC_OP_REG_INTCSR); + + status = inw(devpriv->control_status + INT_ADCFIFO); +#ifdef CB_PCIDAS_DEBUG + if ((status & (INT | EOAI | LADFUL | DAHFI | DAEMI)) == 0) { + comedi_error(dev, "spurious interrupt"); + } +#endif + + // check for analog output interrupt + if (status & (DAHFI | DAEMI)) { + handle_ao_interrupt(dev, status); + } + // check for analog input interrupts + // if fifo half-full + if (status & ADHFI) { + // read data + num_samples = half_fifo; + if (async->cmd.stop_src == TRIG_COUNT && + num_samples > devpriv->count) { + num_samples = devpriv->count; + } + insw(devpriv->adc_fifo + ADCDATA, devpriv->ai_buffer, + num_samples); + cfc_write_array_to_buffer(s, devpriv->ai_buffer, + num_samples * sizeof(sampl_t)); + devpriv->count -= num_samples; + if (async->cmd.stop_src == TRIG_COUNT && devpriv->count == 0) { + async->events |= COMEDI_CB_EOA; + cb_pcidas_cancel(dev, s); + } + // clear half-full interrupt latch + comedi_spin_lock_irqsave(&dev->spinlock, flags); + outw(devpriv->adc_fifo_bits | INT, + devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + // else if fifo not empty + } else if (status & (ADNEI | EOBI)) { + for (i = 0; i < timeout; i++) { + // break if fifo is empty + if ((ADNE & inw(devpriv->control_status + + INT_ADCFIFO)) == 0) + break; + cfc_write_to_buffer(s, inw(devpriv->adc_fifo)); + if (async->cmd.stop_src == TRIG_COUNT && --devpriv->count == 0) { /* end of acquisition */ + cb_pcidas_cancel(dev, s); + async->events |= COMEDI_CB_EOA; + break; + } + } + // clear not-empty interrupt latch + comedi_spin_lock_irqsave(&dev->spinlock, flags); + outw(devpriv->adc_fifo_bits | INT, + devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + } else if (status & EOAI) { + comedi_error(dev, + "bug! encountered end of aquisition interrupt?"); + // clear EOA interrupt latch + comedi_spin_lock_irqsave(&dev->spinlock, flags); + outw(devpriv->adc_fifo_bits | EOAI, + devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + } + //check for fifo overflow + if (status & LADFUL) { + comedi_error(dev, "fifo overflow"); + // clear overflow interrupt latch + comedi_spin_lock_irqsave(&dev->spinlock, flags); + outw(devpriv->adc_fifo_bits | LADFUL, + devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + cb_pcidas_cancel(dev, s); + async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + } + + comedi_event(dev, s); + + return IRQ_HANDLED; +} + +static void handle_ao_interrupt(comedi_device * dev, unsigned int status) +{ + comedi_subdevice *s = dev->write_subdev; + comedi_async *async = s->async; + comedi_cmd *cmd = &async->cmd; + unsigned int half_fifo = thisboard->fifo_size / 2; + unsigned int num_points; + unsigned int flags; + + async->events = 0; + + if (status & DAEMI) { + // clear dac empty interrupt latch + comedi_spin_lock_irqsave(&dev->spinlock, flags); + outw(devpriv->adc_fifo_bits | DAEMI, + devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + if (inw(devpriv->ao_registers + DAC_CSR) & DAC_EMPTY) { + if (cmd->stop_src == TRIG_NONE || + (cmd->stop_src == TRIG_COUNT + && devpriv->ao_count)) { + comedi_error(dev, "dac fifo underflow"); + cb_pcidas_ao_cancel(dev, s); + async->events |= COMEDI_CB_ERROR; + } + async->events |= COMEDI_CB_EOA; + } + } else if (status & DAHFI) { + unsigned int num_bytes; + + // figure out how many points we are writing to fifo + num_points = half_fifo; + if (cmd->stop_src == TRIG_COUNT && + devpriv->ao_count < num_points) + num_points = devpriv->ao_count; + num_bytes = + cfc_read_array_from_buffer(s, devpriv->ao_buffer, + num_points * sizeof(sampl_t)); + num_points = num_bytes / sizeof(sampl_t); + + if (async->cmd.stop_src == TRIG_COUNT) { + devpriv->ao_count -= num_points; + } + // write data to board's fifo + outsw(devpriv->ao_registers + DACDATA, devpriv->ao_buffer, + num_points); + // clear half-full interrupt latch + comedi_spin_lock_irqsave(&dev->spinlock, flags); + outw(devpriv->adc_fifo_bits | DAHFI, + devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + } + + comedi_event(dev, s); +} + +// cancel analog input command +static int cb_pcidas_cancel(comedi_device * dev, comedi_subdevice * s) +{ + unsigned long flags; + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + // disable interrupts + devpriv->adc_fifo_bits &= ~INTE & ~EOAIE; + outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // disable start trigger source and burst mode + outw(0, devpriv->control_status + TRIG_CONTSTAT); + // software pacer source + outw(0, devpriv->control_status + ADCMUX_CONT); + + return 0; +} + +// cancel analog output command +static int cb_pcidas_ao_cancel(comedi_device * dev, comedi_subdevice * s) +{ + unsigned long flags; + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + // disable interrupts + devpriv->adc_fifo_bits &= ~DAHFIE & ~DAEMIE; + outw(devpriv->adc_fifo_bits, devpriv->control_status + INT_ADCFIFO); + + // disable output + devpriv->ao_control_bits &= ~DACEN & ~DAC_PACER_MASK; + outw(devpriv->ao_control_bits, devpriv->control_status + DAC_CSR); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + return 0; +} + +static void cb_pcidas_load_counters(comedi_device * dev, unsigned int *ns, + int rounding_flags) +{ + i8253_cascade_ns_to_timer_2div(TIMER_BASE, &(devpriv->divisor1), + &(devpriv->divisor2), ns, rounding_flags & TRIG_ROUND_MASK); + + /* Write the values of ctr1 and ctr2 into counters 1 and 2 */ + i8254_load(devpriv->pacer_counter_dio + ADC8254, 0, 1, + devpriv->divisor1, 2); + i8254_load(devpriv->pacer_counter_dio + ADC8254, 0, 2, + devpriv->divisor2, 2); +} + +static void write_calibration_bitstream(comedi_device * dev, + unsigned int register_bits, unsigned int bitstream, + unsigned int bitstream_length) +{ + static const int write_delay = 1; + unsigned int bit; + + for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) { + if (bitstream & bit) + register_bits |= SERIAL_DATA_IN_BIT; + else + register_bits &= ~SERIAL_DATA_IN_BIT; + comedi_udelay(write_delay); + outw(register_bits, devpriv->control_status + CALIBRATION_REG); + } +} + +static int caldac_8800_write(comedi_device * dev, unsigned int address, + uint8_t value) +{ + static const int num_caldac_channels = 8; + static const int bitstream_length = 11; + unsigned int bitstream = ((address & 0x7) << 8) | value; + static const int caldac_8800_comedi_udelay = 1; + + if (address >= num_caldac_channels) { + comedi_error(dev, "illegal caldac channel"); + return -1; + } + + if (value == devpriv->caldac_value[address]) + return 1; + + devpriv->caldac_value[address] = value; + + write_calibration_bitstream(dev, cal_enable_bits(dev), bitstream, + bitstream_length); + + comedi_udelay(caldac_8800_comedi_udelay); + outw(cal_enable_bits(dev) | SELECT_8800_BIT, + devpriv->control_status + CALIBRATION_REG); + comedi_udelay(caldac_8800_comedi_udelay); + outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG); + + return 1; +} + +static int trimpot_7376_write(comedi_device * dev, uint8_t value) +{ + static const int bitstream_length = 7; + unsigned int bitstream = value & 0x7f; + unsigned int register_bits; + static const int ad7376_comedi_udelay = 1; + + register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT; + comedi_udelay(ad7376_comedi_udelay); + outw(register_bits, devpriv->control_status + CALIBRATION_REG); + + write_calibration_bitstream(dev, register_bits, bitstream, + bitstream_length); + + comedi_udelay(ad7376_comedi_udelay); + outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG); + + return 0; +} + +/* For 1602/16 only + * ch 0 : adc gain + * ch 1 : adc postgain offset */ +static int trimpot_8402_write(comedi_device * dev, unsigned int channel, + uint8_t value) +{ + static const int bitstream_length = 10; + unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff); + unsigned int register_bits; + static const int ad8402_comedi_udelay = 1; + + register_bits = cal_enable_bits(dev) | SELECT_TRIMPOT_BIT; + comedi_udelay(ad8402_comedi_udelay); + outw(register_bits, devpriv->control_status + CALIBRATION_REG); + + write_calibration_bitstream(dev, register_bits, bitstream, + bitstream_length); + + comedi_udelay(ad8402_comedi_udelay); + outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG); + + return 0; +} + +static int wait_for_nvram_ready(unsigned long s5933_base_addr) +{ + static const int timeout = 1000; + unsigned int i; + + for (i = 0; i < timeout; i++) { + if ((inb(s5933_base_addr + + AMCC_OP_REG_MCSR_NVCMD) & MCSR_NV_BUSY) + == 0) + return 0; + comedi_udelay(1); + } + return -1; +} + +static int nvram_read(comedi_device * dev, unsigned int address, uint8_t * data) +{ + unsigned long iobase = devpriv->s5933_config; + + if (wait_for_nvram_ready(iobase) < 0) + return -ETIMEDOUT; + + outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_LOW_ADDR, + iobase + AMCC_OP_REG_MCSR_NVCMD); + outb(address & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA); + outb(MCSR_NV_ENABLE | MCSR_NV_LOAD_HIGH_ADDR, + iobase + AMCC_OP_REG_MCSR_NVCMD); + outb((address >> 8) & 0xff, iobase + AMCC_OP_REG_MCSR_NVDATA); + outb(MCSR_NV_ENABLE | MCSR_NV_READ, iobase + AMCC_OP_REG_MCSR_NVCMD); + + if (wait_for_nvram_ready(iobase) < 0) + return -ETIMEDOUT; + + *data = inb(iobase + AMCC_OP_REG_MCSR_NVDATA); + + return 0; +} + +/* + * A convenient macro that defines init_module() and cleanup_module(), + * as necessary. + */ +COMEDI_PCI_INITCLEANUP(driver_cb_pcidas, cb_pcidas_pci_table); -- 2.20.1