From 57b48ab49b7a9ac5ff94402ade2ccb5d63579816 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 15 Sep 2015 16:26:16 +0300 Subject: [PATCH] spi: bfin-sport: Calculate transfer speed unconditionally SPI core validates the transfer speed and defaults to spi->max_speed_hz in case the transfer speed is not set so code here won't use the chip->baud value (which is derived from spi->max_speed_hz). Please note driver uses chip->baud at the beginning of message transmission by calling the bfin_sport_spi_restore_state() but then programs per transfer speed in bfin_sport_spi_pump_transfers(). I'm not familiar with the HW so I don't know would it be possible to remove chip->baud completely by either using constant value in bfin_sport_spi_restore_state() or by removing the tclkdiv register write there. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-bfin-sport.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index a78693189f45..6c967555a56a 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -352,10 +352,7 @@ bfin_sport_spi_pump_transfers(unsigned long data) transfer = drv_data->cur_transfer; chip = drv_data->cur_chip; - if (transfer->speed_hz) - transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz); - else - transfer_speed = chip->baud; + transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz); bfin_write(&drv_data->regs->tclkdiv, transfer_speed); SSYNC(); -- 2.20.1