From 578ca87c9d18d344b449a8eefee40c10e4fc319f Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Mon, 7 Mar 2011 09:28:10 +0530 Subject: [PATCH] sata_fsl: Update RX_WATER_MARK for TRANSCFG RX_WATER_MARK sets the number of locations in Rx FIFO that can be used before the transport layer instructs the link layer to transmit HOLDS. Note that it can take some time for the HOLDs to get to the other end, and that in the interim there must be enough room in the FIFO to absorb all data that could arrive. Update the new recommended value to 16. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 2ddb567f165..7f9eab34a38 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -185,6 +185,11 @@ enum { COMMANDSTAT = 0x20, }; +/* TRANSCFG (transport-layer) configuration control */ +enum { + TRANSCFG_RX_WATER_MARK = (1 << 4), +}; + /* PHY (link-layer) configuration control */ enum { PHY_BIST_ENABLE = 0x01, @@ -1305,6 +1310,7 @@ static int sata_fsl_probe(struct platform_device *ofdev, struct sata_fsl_host_priv *host_priv = NULL; int irq; struct ata_host *host; + u32 temp; struct ata_port_info pi = sata_fsl_port_info[0]; const struct ata_port_info *ppi[] = { &pi, NULL }; @@ -1319,6 +1325,12 @@ static int sata_fsl_probe(struct platform_device *ofdev, ssr_base = hcr_base + 0x100; csr_base = hcr_base + 0x140; + if (!of_device_is_compatible(ofdev->dev.of_node, "fsl,mpc8315-sata")) { + temp = ioread32(csr_base + TRANSCFG); + temp = temp & 0xffffffe0; + iowrite32(temp | TRANSCFG_RX_WATER_MARK, csr_base + TRANSCFG); + } + DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG)); DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc)); DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE); -- 2.20.1