From 5558870bfbcca10cfc7b13ab866687012ea3c9af Mon Sep 17 00:00:00 2001 From: Karsten Weiss Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] [PATCH] x86-64: improved iommu documentation - add SWIOTLB config help text - mention Documentation/x86_64/boot-options.txt in Documentation/kernel-parameters.txt - remove the duplication of the iommu kernel parameter documentation. - Better explanation of some of the iommu kernel parameter options. - "32MB< Signed-off-by: Andi Kleen Acked-by: Muli Ben-Yehuda Cc: Andi Kleen Signed-off-by: Andrew Morton --- Documentation/kernel-parameters.txt | 3 + Documentation/x86_64/boot-options.txt | 109 ++++++++++++++++++-------- arch/x86_64/Kconfig | 10 ++- arch/x86_64/kernel/pci-dma.c | 28 +------ 4 files changed, 90 insertions(+), 60 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d25acd51e181..733a736bc6c8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -104,6 +104,9 @@ loader, and have no meaning to the kernel directly. Do not modify the syntax of boot loader parameters without extreme need or coordination with . +There are also arch-specific kernel-parameters not documented here. +See for example . + Note that ALL kernel parameters listed below are CASE SENSITIVE, and that a trailing = on the name of any parameter states that that parameter will be entered as an environment variable, whereas its absence indicates that diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt index 5c86ed6f0448..0d653993f361 100644 --- a/Documentation/x86_64/boot-options.txt +++ b/Documentation/x86_64/boot-options.txt @@ -180,40 +180,81 @@ PCI pci=lastbus=NUMBER Scan upto NUMBER busses, no matter what the mptable says. pci=noacpi Don't use ACPI to set up PCI interrupt routing. -IOMMU - - iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] - [,forcesac][,fullflush][,nomerge][,noaperture][,calgary] - size set size of iommu (in bytes) - noagp don't initialize the AGP driver and use full aperture. - off don't use the IOMMU - leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) - memaper[=order] allocate an own aperture over RAM with size 32MB^order. - noforce don't force IOMMU usage. Default. - force Force IOMMU. - merge Do SG merging. Implies force (experimental) - nomerge Don't do SG merging. - forcesac For SAC mode for masks <40bits (experimental) - fullflush Flush IOMMU on each allocation (default) - nofullflush Don't use IOMMU fullflush - allowed overwrite iommu off workarounds for specific chipsets. - soft Use software bounce buffering (default for Intel machines) - noaperture Don't touch the aperture for AGP. - allowdac Allow DMA >4GB - When off all DMA over >4GB is forced through an IOMMU or bounce - buffering. - nodac Forbid DMA >4GB - panic Always panic when IOMMU overflows - calgary Use the Calgary IOMMU if it is available - - swiotlb=pages[,force] - - pages Prereserve that many 128K pages for the software IO bounce buffering. - force Force all IO through the software TLB. - - calgary=[64k,128k,256k,512k,1M,2M,4M,8M] - calgary=[translate_empty_slots] - calgary=[disable=] +IOMMU (input/output memory management unit) + + Currently four x86-64 PCI-DMA mapping implementations exist: + + 1. : use no hardware/software IOMMU at all + (e.g. because you have < 3 GB memory). + Kernel boot message: "PCI-DMA: Disabling IOMMU" + + 2. : AMD GART based hardware IOMMU. + Kernel boot message: "PCI-DMA: using GART IOMMU" + + 3. : Software IOMMU implementation. Used + e.g. if there is no hardware IOMMU in the system and it is need because + you have >3GB memory or told the kernel to us it (iommu=soft)) + Kernel boot message: "PCI-DMA: Using software bounce buffering + for IO (SWIOTLB)" + + 4. : IBM Calgary hardware IOMMU. Used in IBM + pSeries and xSeries servers. This hardware IOMMU supports DMA address + mapping with memory protection, etc. + Kernel boot message: "PCI-DMA: Using Calgary IOMMU" + + iommu=[][,noagp][,off][,force][,noforce][,leak[=] + [,memaper[=]][,merge][,forcesac][,fullflush][,nomerge] + [,noaperture][,calgary] + + General iommu options: + off Don't initialize and use any kind of IOMMU. + noforce Don't force hardware IOMMU usage when it is not needed. + (default). + force Force the use of the hardware IOMMU even when it is + not actually needed (e.g. because < 3 GB memory). + soft Use software bounce buffering (SWIOTLB) (default for + Intel machines). This can be used to prevent the usage + of an available hardware IOMMU. + + iommu options only relevant to the AMD GART hardware IOMMU: + Set the size of the remapping area in bytes. + allowed Overwrite iommu off workarounds for specific chipsets. + fullflush Flush IOMMU on each allocation (default). + nofullflush Don't use IOMMU fullflush. + leak Turn on simple iommu leak tracing (only when + CONFIG_IOMMU_LEAK is on). Default number of leak pages + is 20. + memaper[=] Allocate an own aperture over RAM with size 32MB<4GB. + DAC is used with 32-bit PCI to push a 64-bit address in + two cycles. When off all DMA over >4GB is forced through + an IOMMU or software bounce buffering. + nodac Forbid DAC mode, i.e. DMA >4GB. + panic Always panic when IOMMU overflows. + calgary Use the Calgary IOMMU if it is available + + iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU + implementation: + swiotlb=[,force] + Prereserve that many 128K pages for the software IO + bounce buffering. + force Force all IO through the software TLB. + + Settings for the IBM Calgary hardware IOMMU currently found in IBM + pSeries and xSeries machines: + + calgary=[64k,128k,256k,512k,1M,2M,4M,8M] + calgary=[translate_empty_slots] + calgary=[disable=] + panic Always panic when IOMMU overflows 64k,...,8M - Set the size of each PCI slot's translation table when using the Calgary IOMMU. This is the size of the translation diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 02dd39457bcf..a55382a1bb46 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -458,8 +458,8 @@ config IOMMU on systems with more than 3GB. This is usually needed for USB, sound, many IDE/SATA chipsets and some other devices. Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART - based IOMMU and a software bounce buffer based IOMMU used on Intel - systems and as fallback. + based hardware IOMMU and a software bounce buffer based IOMMU used + on Intel systems and as fallback. The code is only active when needed (enough memory and limited device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified too. @@ -496,6 +496,12 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT # need this always selected by IOMMU for the VIA workaround config SWIOTLB bool + help + Support for software bounce buffers used on x86-64 systems + which don't have a hardware IOMMU (e.g. the current generation + of Intel's x86-64 CPUs). Using this PCI devices which can only + access 32-bits of memory can be used on systems with more than + 3 GB of memory. If unsure, say Y. config X86_MCE bool "Machine check support" if EMBEDDED diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 683b7a5c1ab3..651ccfb06697 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -223,30 +223,10 @@ int dma_set_mask(struct device *dev, u64 mask) } EXPORT_SYMBOL(dma_set_mask); -/* iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] - [,forcesac][,fullflush][,nomerge][,biomerge] - size set size of iommu (in bytes) - noagp don't initialize the AGP driver and use full aperture. - off don't use the IOMMU - leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) - memaper[=order] allocate an own aperture over RAM with size 32MB^order. - noforce don't force IOMMU usage. Default. - force Force IOMMU. - merge Do lazy merging. This may improve performance on some block devices. - Implies force (experimental) - biomerge Do merging at the BIO layer. This is more efficient than merge, - but should be only done with very big IOMMUs. Implies merge,force. - nomerge Don't do SG merging. - forcesac For SAC mode for masks <40bits (experimental) - fullflush Flush IOMMU on each allocation (default) - nofullflush Don't use IOMMU fullflush - allowed overwrite iommu off workarounds for specific chipsets. - soft Use software bounce buffering (default for Intel machines) - noaperture Don't touch the aperture for AGP. - allowdac Allow DMA >4GB - nodac Forbid DMA >4GB - panic Force panic when IOMMU overflows -*/ +/* + * See for the iommu kernel parameter + * documentation. + */ __init int iommu_setup(char *p) { iommu_merge = 1; -- 2.20.1