From 5528e032702be937acdfe8c6395461e0e8acaa85 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Mon, 30 Mar 2015 09:51:56 +0300 Subject: [PATCH] ath10k: rework legacy rx rate decoding Instead of using a hacky table and magic values use supported band information advertised to mac80211. This may impact performance a little when dealing with legacy rx rates depending on system architecture. It's probably negligible. This also fixes a highly theoretical corner case when HT/VHT rates weren't reported correctly if channel frequency wasn't known. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/htt_rx.c | 64 ++++-------------------- drivers/net/wireless/ath/ath10k/mac.c | 37 ++++++++++++-- drivers/net/wireless/ath/ath10k/mac.h | 2 + 3 files changed, 46 insertions(+), 57 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index a4d19d0b6c53..157dc8dd2ee0 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -643,44 +643,15 @@ struct amsdu_subframe_hdr { __be16 len; } __packed; -static const u8 rx_legacy_rate_idx[] = { - 3, /* 0x00 - 11Mbps */ - 2, /* 0x01 - 5.5Mbps */ - 1, /* 0x02 - 2Mbps */ - 0, /* 0x03 - 1Mbps */ - 3, /* 0x04 - 11Mbps */ - 2, /* 0x05 - 5.5Mbps */ - 1, /* 0x06 - 2Mbps */ - 0, /* 0x07 - 1Mbps */ - 10, /* 0x08 - 48Mbps */ - 8, /* 0x09 - 24Mbps */ - 6, /* 0x0A - 12Mbps */ - 4, /* 0x0B - 6Mbps */ - 11, /* 0x0C - 54Mbps */ - 9, /* 0x0D - 36Mbps */ - 7, /* 0x0E - 18Mbps */ - 5, /* 0x0F - 9Mbps */ -}; - static void ath10k_htt_rx_h_rates(struct ath10k *ar, struct ieee80211_rx_status *status, struct htt_rx_desc *rxd) { - enum ieee80211_band band; - u8 cck, rate, rate_idx, bw, sgi, mcs, nss; + struct ieee80211_supported_band *sband; + u8 cck, rate, bw, sgi, mcs, nss; u8 preamble = 0; u32 info1, info2, info3; - /* Band value can't be set as undefined but freq can be 0 - use that to - * determine whether band is provided. - * - * FIXME: Perhaps this can go away if CCK rate reporting is a little - * reworked? - */ - if (!status->freq) - return; - - band = status->band; info1 = __le32_to_cpu(rxd->ppdu_start.info1); info2 = __le32_to_cpu(rxd->ppdu_start.info2); info3 = __le32_to_cpu(rxd->ppdu_start.info3); @@ -689,31 +660,18 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar, switch (preamble) { case HTT_RX_LEGACY: + /* To get legacy rate index band is required. Since band can't + * be undefined check if freq is non-zero. + */ + if (!status->freq) + return; + cck = info1 & RX_PPDU_START_INFO1_L_SIG_RATE_SELECT; rate = MS(info1, RX_PPDU_START_INFO1_L_SIG_RATE); - rate_idx = 0; - - if (rate < 0x08 || rate > 0x0F) - break; - - switch (band) { - case IEEE80211_BAND_2GHZ: - if (cck) - rate &= ~BIT(3); - rate_idx = rx_legacy_rate_idx[rate]; - break; - case IEEE80211_BAND_5GHZ: - rate_idx = rx_legacy_rate_idx[rate]; - /* We are using same rate table registering - HW - ath10k_rates[]. In case of 5GHz skip - CCK rates, so -4 here */ - rate_idx -= 4; - break; - default: - break; - } + rate &= ~RX_PPDU_START_RATE_FLAG; - status->rate_idx = rate_idx; + sband = &ar->mac.sbands[status->band]; + status->rate_idx = ath10k_mac_hw_rate_to_idx(sband, rate); break; case HTT_RX_HT: case HTT_RX_HT_WITH_TXBF: diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 743fac8e2ed7..8bb4c1939b9e 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -36,10 +36,20 @@ /*********/ static struct ieee80211_rate ath10k_rates[] = { - { .bitrate = 10, .hw_value = ATH10K_HW_RATE_CCK_LP_1M }, - { .bitrate = 20, .hw_value = ATH10K_HW_RATE_CCK_LP_2M }, - { .bitrate = 55, .hw_value = ATH10K_HW_RATE_CCK_LP_5_5M }, - { .bitrate = 110, .hw_value = ATH10K_HW_RATE_CCK_LP_11M }, + { .bitrate = 10, + .hw_value = ATH10K_HW_RATE_CCK_LP_1M }, + { .bitrate = 20, + .hw_value = ATH10K_HW_RATE_CCK_LP_2M, + .hw_value_short = ATH10K_HW_RATE_CCK_SP_2M, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = ATH10K_HW_RATE_CCK_LP_5_5M, + .hw_value_short = ATH10K_HW_RATE_CCK_SP_5_5M, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = ATH10K_HW_RATE_CCK_LP_11M, + .hw_value_short = ATH10K_HW_RATE_CCK_SP_11M, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M }, { .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M }, @@ -75,6 +85,25 @@ static u8 ath10k_mac_bitrate_to_rate(int bitrate) (ath10k_mac_bitrate_is_cck(bitrate) ? BIT(7) : 0); } +u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband, + u8 hw_rate) +{ + const struct ieee80211_rate *rate; + int i; + + for (i = 0; i < sband->n_bitrates; i++) { + rate = &sband->bitrates[i]; + + if (rate->hw_value == hw_rate) + return i; + else if (rate->flags & IEEE80211_RATE_SHORT_PREAMBLE && + rate->hw_value_short == hw_rate) + return i; + } + + return 0; +} + /**********/ /* Crypto */ /**********/ diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h index 2cdf68d7f08c..af806c6f569b 100644 --- a/drivers/net/wireless/ath/ath10k/mac.h +++ b/drivers/net/wireless/ath/ath10k/mac.h @@ -55,6 +55,8 @@ bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr, u8 keyidx); void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb); void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id); +u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband, + u8 hw_rate); static inline struct ath10k_vif *ath10k_vif_to_arvif(struct ieee80211_vif *vif) { -- 2.20.1