From 54cd255808761ecfd0e000eb78eb74dde8cd0c96 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 29 Nov 2016 16:23:41 +0200 Subject: [PATCH] dmaengine: dma_slave_config: add support for slave port window Some slave devices uses address window instead of single register for read and/or write of data. With the src/dst_port_window_size the address window can be specified and the DMAengine driver should use this information to correctly set up the transfer to loop within the provided window. Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index cc535a478bae..feee6ec6a13b 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -336,6 +336,12 @@ enum dma_slave_buswidth { * may or may not be applicable on memory sources. * @dst_maxburst: same as src_maxburst but for destination target * mutatis mutandis. + * @src_port_window_size: The length of the register area in words the data need + * to be accessed on the device side. It is only used for devices which is using + * an area instead of a single register to receive the data. Typically the DMA + * loops in this area in order to transfer the data. + * @dst_port_window_size: same as src_port_window_size but for the destination + * port. * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill * with 'true' if peripheral should be flow controller. Direction will be * selected at Runtime. @@ -363,6 +369,8 @@ struct dma_slave_config { enum dma_slave_buswidth dst_addr_width; u32 src_maxburst; u32 dst_maxburst; + u32 src_port_window_size; + u32 dst_port_window_size; bool device_fc; unsigned int slave_id; }; -- 2.20.1