From 5497159c460fadf0d8190b6ef144ec22fa26aa6b Mon Sep 17 00:00:00 2001 From: "ludovic.desroches@atmel.com" Date: Wed, 29 Jul 2015 16:22:46 +0200 Subject: [PATCH] mmc: sdhci: switch from programmable clock mode to divided one if needed In programmable mode, if the clock frequency is too high, the divider can be too small to meet the clock frequency requirement especially to init the SD card. In this case, switch to the divided clock mode. Signed-off-by: Ludovic Desroches Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index c83d11080da0..0f1a8876e3b1 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1151,6 +1151,7 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) int real_div = div, clk_mul = 1; u16 clk = 0; unsigned long timeout; + bool switch_base_clk = false; host->mmc->actual_clock = 0; @@ -1188,15 +1189,25 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) <= clock) break; } - /* - * Set Programmable Clock Mode in the Clock - * Control register. - */ - clk = SDHCI_PROG_CLOCK_MODE; - real_div = div; - clk_mul = host->clk_mul; - div--; - } else { + if ((host->max_clk * host->clk_mul / div) <= clock) { + /* + * Set Programmable Clock Mode in the Clock + * Control register. + */ + clk = SDHCI_PROG_CLOCK_MODE; + real_div = div; + clk_mul = host->clk_mul; + div--; + } else { + /* + * Divisor can be too small to reach clock + * speed requirement. Then use the base clock. + */ + switch_base_clk = true; + } + } + + if (!host->clk_mul || switch_base_clk) { /* Version 3.00 divisors must be a multiple of 2. */ if (host->max_clk <= clock) div = 1; -- 2.20.1