From 54717e5330318d53180a1f3026f617509031ee68 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Sun, 1 Jul 2012 19:53:52 +0530 Subject: [PATCH] ath9k_hw: do not load noise floor readings when it is running Noise floor calibration is performed on longcal interval and the reading will be updated in history buffer. On rare occasions, the previous noisefloor calibration might not be completed within the period and trying to load nf reading will be failed. In such situation, postpone the nf cabliration to next cycle to give enough time to complete the calibration. This was already taken care for ar9002 chips. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index d7deb8c9f299..84b558d126ca 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -159,14 +159,11 @@ static bool ar9003_hw_calibrate(struct ath_hw *ah, } } - /* Do NF cal only at longer intervals */ - if (longcal) { - /* - * Get the value from the previous NF cal and update - * history buffer. - */ - ath9k_hw_getnf(ah, chan); - + /* + * Do NF cal only at longer intervals. Get the value from + * the previous NF cal and update history buffer. + */ + if (longcal && ath9k_hw_getnf(ah, chan)) { /* * Load the NF from history buffer of the current channel. * NF is slow time-variant, so it is OK to use a historical -- 2.20.1