From 53b0b37852134b19df04cadf7526ddf6650e9915 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 29 Jul 2015 14:10:03 +0200 Subject: [PATCH] ARM: at91/dt: at91sam9263: use slow clock where necessary The watchdog, the reset controller, the two real-time timers, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by: Boris Brezillon Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9263.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index e36d966ef5e8..f1f5fa3a9e6e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -377,18 +377,20 @@ compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>; - clock-names = "t0_clk"; + clocks = <&tcb_clk>, <&slow_xtal>; + clock-names = "t0_clk", "slow_clk"; }; rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&slow_xtal>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&slow_xtal>; }; pinctrl@fffff200 { @@ -902,6 +904,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; -- 2.20.1