From 52d0aa7980cfee85c831b2969e659055395386d4 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 14 May 2014 20:54:26 +0000 Subject: [PATCH] iscsi-target: Disable Immediate + Unsolicited Data with ISER Protection This patch explicitly disables Immediate + Unsolicited Data for ISER connections during login in iscsi_login_zero_tsih_s2() when protection has been enabled for the session by the underlying hardware. This is currently required because protection / signature memory regions (MRs) expect T10 PI to occur on RDMA READs + RDMA WRITEs transfers, and not on a immediate data payload associated with ISCSI_OP_SCSI_CMD, or unsolicited data-out associated with a ISCSI_OP_SCSI_DATA_OUT. v2 changes: - Add TARGET_PROT_DOUT_INSERT check (Sagi) - Add pr_debug noisemaker (Sagi) - Add goto to avoid early return from MRDSL check (nab) Cc: Sagi Grimberg Cc: Or Gerlitz Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 27 ++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index b72d8550e8bc..ca31fa1b8a4b 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -436,7 +436,7 @@ static int iscsi_login_zero_tsih_s2( } off = mrdsl % PAGE_SIZE; if (!off) - return 0; + goto check_prot; if (mrdsl < PAGE_SIZE) mrdsl = PAGE_SIZE; @@ -452,6 +452,31 @@ static int iscsi_login_zero_tsih_s2( ISCSI_LOGIN_STATUS_NO_RESOURCES); return -1; } + /* + * ISER currently requires that ImmediateData + Unsolicited + * Data be disabled when protection / signature MRs are enabled. + */ +check_prot: + if (sess->se_sess->sup_prot_ops & + (TARGET_PROT_DOUT_STRIP | TARGET_PROT_DOUT_PASS | + TARGET_PROT_DOUT_INSERT)) { + + sprintf(buf, "ImmediateData=No"); + if (iscsi_change_param_value(buf, conn->param_list, 0) < 0) { + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_NO_RESOURCES); + return -1; + } + + sprintf(buf, "InitialR2T=Yes"); + if (iscsi_change_param_value(buf, conn->param_list, 0) < 0) { + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_NO_RESOURCES); + return -1; + } + pr_debug("Forcing ImmediateData=No + InitialR2T=Yes for" + " T10-PI enabled ISER session\n"); + } } return 0; -- 2.20.1